Flow Sensors / Detectors

Customized Calibration of IFM Flow Sensors - Highlighted in New Video
Sensors, Monitors & Transducers

Customized Calibration of IFM Flow Sensors - Highlighted in New Video

Industrial oils are used for many different purposes. This is why the detection of flow and temperature is of vital importance. Incorrect adjustment of sensors to flow and temperature values may affect the energy efficiency of your installations and thereby increase the cost. All SB flow sensors from ifm can be adjusted to your specific oil and thereby enable precise programming of measurement...

Read More »
Standex-Meder Electronics to Showcase its Wide Range of Sensor Solutions at the 2017 Sensors Expo & Conference
Sensors, Monitors & Transducers

Standex-Meder Electronics to Showcase its Wide Range of Sensor Solutions at the 2017 Sensors Expo & Conference

Visit Standex-Meder Electronics’ engineering and application experts at Booth 1434 in San Jose, CA from June 27-29, 2017 CINCINNATI - May 23, 2017 - Standex-Meder Electronics, a global components manufacturer will highlight its diverse range of standard and custom sensor product solutions at the 2017 Sensors Expo & Conference located at the McEnery Conference Center in San Jose, CA from June...

Read More »
Sensible Level and Flow Sensor Solutions
Sensors, Monitors & Transducers

Sensible Level and Flow Sensor Solutions

80 GHz Non-Contact Radar Made Better by BinMaster Get the awesome performance of 80 GHz radar and the options you need to simplify installation. BinMaster offers mounting plates, swiveling holders, and a variety of flanges to eliminate extra fabrication. There's wireless options to reduce costs and running long spans of wire. Local display consoles for data access from the ground or a...

Read More »
SFM3400 Flow Sensors are bi-directionally calibrated.
Sensors, Monitors & Transducers

SFM3400 Flow Sensors are bi-directionally calibrated.

Available in single-use solution (SFM3400-D) and reusable solution (SFM3400-AW), SFM3400 Flow Sensor comes with two proximal flow sensors to aid respiratory therapy in adults. Featuring specially designed flow channel for <1 ml dead space, sensors can be connected through medical cones. Device is suitable for proximal flow measurements in medical ventilation and anesthesia and has fast signal...

Read More »
Whitepaper: 7 Trends for IoT in Hospitality
Sponsored

Whitepaper: 7 Trends for IoT in Hospitality

The Internet of Things is rapidly becoming a defining characteristic in the daily landscape of human experience. Billions of smart devices are already connected to this vast system through smart homes, medical devices, and much more; the trend is predicted to continue its exponential growth into the hundred billions within the next few years. This white paper illuminates how the future of IoT will completely revolutionize the way the hospitality industry in particular will function with this new technology. Due to the ability to reduce energy costs, reduce staff labor, and create completely individualized and engaging guest experiences, the hospitality industry is in a unique position to capitalize on IoT. Using real life case studies, the report outlines seven ideas for how the IoT can be used to reduce energy consumption, increase guest satisfaction, improve maintenance, and more.

Read More »
Non-Invasive Optical Sensor Switches detect high/low flow rates.
Sensors, Monitors & Transducers

Non-Invasive Optical Sensor Switches detect high/low flow rates.

Compatible with Aalborg® P, S, and T rotameters, Optical Sensor Switch Hi-Lo contains 2 sets of self-contained mini-slim photoelectric sensors located on 2 solid carriers. Sensors, consisting of transmitter and receiver, signal cut-off valve, alarm, or other device (not included) when float passes above or below the desired setting to facilitate monitoring of desired flow level. Response time...

Read More »

MEMSIC to Showcase Industrial, Wearable and Smart Cities IOT Sensing Solutions at Sensors Expo and Conference 2016
Sensors, Monitors & Transducers

MEMSIC to Showcase Industrial, Wearable and Smart Cities IOT Sensing Solutions at Sensors Expo and Conference 2016

With over one billion sensors shipped, MEMSIC is a world leader for the consumer electronics, communications, automotive, medical and industrial sensing sectors Sensors Expo, San Jose, CA - June 1, 2016 - MEMSIC, Inc. plans to demonstrate its full range of advanced sensing technologies at the Sensors Expo and Conference, to be held June 21 to June 23, 2016 at the McEnery Convention Center in San...

Read More »

Standard Motor Products Releases 186 New Parts for Standard
Electrical Equipment & Systems

Standard Motor Products Releases 186 New Parts for Standard

NEW YORK - Standard Motor Products, Inc. (SMP) announces the addition of 186 new part numbers to its Standard® and Intermotor® lines. The release expands coverage through the 2016 model year covering more than 67.5 million additional VIO. SMP introduced 90 new sensors covering 23 million VIO. Highlights include 47 accelerator pedal sensors, 16 ABS speed sensors, 7 mass air flow (MAF) sensors,...

Read More »
Sensors, Monitors & Transducers

KEYENCE Clamp-On Flow Sensor Receives Innovation Award

KEYENCE-s FD-Q Clamp-On Flow Sensor has been recognized by New Equipment Digest as the 2016 Innovation Award winner. The success of the FD-Q can be directly attributed to its impact on American Manufacturing.The FD-Q, released in the summer of 2015, introduced ground-breaking technology for liquid flow monitoring in the factory automation industry. As opposed to conventional models that require...

Read More »

Small, Flexible Candlestick Sensor Measures Air Temperature and Velocity
Sensors, Monitors & Transducers

Small, Flexible Candlestick Sensor Measures Air Temperature and Velocity

Norwood, MA – Advanced Thermal Solutions, Inc. (ATS) now provides the base-and-stem Candlestick sensor for simultaneously measuring air temperature and velocity when characterizing thermal conditions inside electronic systems. The Candlestick sensor is narrow and low profile, in heights of 9, 12 and 20mm. These features minimize the disturbance of airborne heat flow in the test domain for more...

Read More »
How SpinSelect Can Save You Time and Money
Sponsored

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect Multi-Pocket selectable quick change tool holder, its time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and were pleased to show you why.

Read More »

All Topics