Gas Monitors feature 5 combustible gas ranges.

Gas Monitors feature 5 combustible gas ranges.

GT-Innova monitors detect combustible gases, oxygen, and up to 2 toxic gases (carbon monoxide, hydrogen sulfide, chlorine, hydrogen cyanide, ammonia, nitric oxide, nitrogen dioxide, sulfur dioxide or phosphine). Units provide on-demand display of PEAK, STEL, and TWA readings. Features include sample draw pump, datalogger, Innova View(TM) datalog and configuration package, gas ranges of 0-1000 ppm...

Read More »

Proximity Switch has multi-coil design.

Efector-m proximity switch offers true ferrous-only sensing for aluminum machining applications. Stainless steel sensing face prevents aluminum chips from adhering to face of switch. Compatible with oils and coolants used in machining, switch features zero-leak, IP68 protection rating. 12mm dia switch has 3mm flush-mount sensing range, and 18mm dia switch has 5mm flush-mount sensing range. All...

Read More »
Pressure Sensors offer 1/4 NPT pressure fitting.

Pressure Sensors offer 1/4 NPT pressure fitting.

Series 121A20/30 industrial, dynamic ICP(R) pressure sensors are offered in full-scale ranges from 100 psi to 5000 psi, and offer all-welded, stainless-steel construction. Units contain built-in microelectronic circuitry, and provide electrical case isolation. Sensors are available with 2-pin military connector or integral, molded, submersible cable assembly. Units can detect very small pressure...

Read More »
Position Transducers are supplied with a signal processor.

Position Transducers are supplied with a signal processor.

Fastar(R) linear position transducers consist of cylindrical body, 0.750 in. dia and movable core, threaded internally to facilitate mounting. They are available in measurement ranges of 0.76 to 24.0 in. Signal processor is available with variety of input/output configurations including DC in or line power with DC voltage, 4-20mA outputs and/or digital display. All units are supplied with...

Read More »
Three Sensors provide dissolved oxygen measurement.

Three Sensors provide dissolved oxygen measurement.

Model 5600 uses 3-electrode polarographic Ross Cell technology. Model 5500 uses 3-electrode Clark Cell technology to provide more accurate and stable measurement than 2-electrode technologies. Model 5040 self-cleaning sensor excels in processes that have high concentrations of grease and/or oil.

Read More »
PDA reads and writes to TEDS smart transducers.

PDA reads and writes to TEDS smart transducers.

Model 400A75 TEDS PDA includes Palm m105 with 8MB of RAM, communication hardware that plugs into HotSync(R) port, cable, and installed software to read and write to PCB IEEE P1451.4 compliant TEDS sensors. TEDS are self-identifying transducers with fields that fully describe type, operation, and attributes of transducer. PDA reads full content of TEDS memory and displays it on Palm's LCD display.

Read More »
In-line Flow Sensors are used for liquids and gases.

In-line Flow Sensors are used for liquids and gases.

D04 and D10 self-contained flow sensors monitor changes in flow as low as 5 ml/min (0.001 gpm). They connect directly into pipeline and maintain accuracy during changes in media temperature. Sensors are available with discrete transistor output or 4-20 mA analog signal output, both in DC only. Each can be set up for various applications using adjustment potentiometer on front of housing. All...

Read More »
Proximity Sensors detect up to 8 meters.

Proximity Sensors detect up to 8 meters.

SUPERPROX(R) Model SM900A-8 proximity sensors have 30mm housing, sensing range of 203mm to 8m, and On/Off output. Functionality selections include normally-open or normally-closed NPN and PNP outputs, complementary NPN or complementary PNP outputs. Available in ULTEM(R) plastic housing, sensors detect all materials regardless of color, shape and composition. Temperature compensation allows for...

Read More »
Liquid Level Meter provides specific gravity compensation.

Liquid Level Meter provides specific gravity compensation.

Microprocessor-based Model LE100 has built-in back pressure sensor capable of measuring levels up to 1000mm. Front panel mylar display features 2 digital readings for actual level and set value, 8 output LED indication, and 4 push buttons for setting unit. Built-in linearizer compensates for variations in tank shapes. LE100 provides sampling time of 0.2 sec with +/- 0.3% repeatability. It can...

Read More »

Light Scattering Detector is for micro and capillary HPLC.

PL-ELS 1000Â-µ microbore evaporative light scattering detector provides baseline stability for HPLC separations requiring gradient elution. Detector operates with eluent flow rates from 1 to 500 Â-µl/min, detects all non-volatile solutes, and does not require UV chromophore. It can be used as standalone detector for separations using capillaries down to 300 Â-µm ID, or can be used as...

Read More »

All Topics