Pressure Sensors meet 3A, FDA and EHEDG specs.
PL2, PM2, PF2 and P12 sanitary sensors monitor pressure in food, beverage, dairy, and pharmaceutical applications. Sensor housings are 316 stainless steel and accept variety of sanitary fittings, including 1 1/2 and 2 in. Tri-Clamp fittings. All are 2-wire transmitters with scaleable 4-20mA or 0-l0V analog output that is accurate to 0.6% of range with repeatability of 0.1 %. Models are available...
Read More »pH/ORP Sensors use differential electrode technology.
pHD(TM) electrode sensors use 3 measuring electrodes. Process and reference electrodes measure pH differentially, with respect to third ground electrode, reducing reference junction fouling and minimizing ground loops. Preamplifier boosts electrodes' mV signals for transmission up to 3,000 ft. PEEK(R) and Ryton(R) bodies provide chemical resistance in aggressive process solutions. Convertible,...
Read More »Position Transducer measures up to 4 in. of travel.
Model 174-0321T subminiature position transducer uses stainless steel cable wound around stainless steel drum. Bearing-mounted drum is mated to potentiometric element that translates linear position information to electrical signal. Transducer monitors cable acceleration in excess of 50 g's, and features 5K ohm co-molded conductive plastic potentiometric elements. It has operating temperature of...
Read More »Proximity Sensor detects tiny objects 2 in. away.
Extended range 12mm ultrasonic SUPERPROX(R) Model SM300 Series detects all materials at distances from as close as 0.25 in. to as far as 2.00 in. from sensor face. At such distances, sensor is safely out of harm's way. It detects objects as small as 0.098 in. dia rod or 0.039 in. wide flat bar. Operating on 12 to 24 Vdc, sensor is equipped with both sinking (NPN) and sourcing (PNP) outputs.
Read More »Adhesive Tapes for Energy & Utility Applications
Read about the various types of tapes used in energy and utility applications.
Read More »Capacitive Sensor measures liquid level through foam.
Self-compensating proximity sensor for non-flush liquid level sensing applications, can be placed within tank, making contact with liquid, or thru tank wall of plastic, fiberglass or sight glass window. It eliminates false detection of foaming materials and filming/coating on inside walls of tank. It is IP 67 rated, CE approved, short circuit protected, overload protected, with temperature rating...
Read More »Pressure Transmitter measures vacuum.
NIST-traceable Model FPV provides vacuum pressure measurements from 10 in. water to 15 psiv. Selectable parameters include choice of 0.1% or 0.25% accuracy, 6 electrical terminations, 6 pressure ports, and 0-5 Vdc, 0-10 Vdc, 2-wire 4-20 mA, or mV/V output. Long-term stability is 0.04% FS for 30 months. Certifications are available for CE and for intrinsically-safe installations.
Read More »Temperature Measurement System uses miniature IR sensor.
Series MIL Mini In-Line 2-piece system has non-contact sensing head and separate electronics. Electronics offer emissivity, peak hold, valley hold, and averaging function, which are adjustable on 5-digit LCD. Sensor is housed in stainless-steel enclosure for harsh environments. Series is designed for temperature ranges from -40 to 1112 deg F. System has accuracy of Ã-
Read More »Analog Laser Sensor has 2 m range.
Powered by 18-30 Vdc, Model BOD-66M analog laser sensor allows continuous measurement of parameters such as distance, height, and length. Analog and digital outputs provide flexibility for industrial automation, and teachable setpoint provides discrete digital PNP output when target reaches set distance. Sensing range is from 200 mm to 2 m with resolutions of
Read More »Tactile Sensor System conforms to complex-shaped objects.
Model T-2000 tactile sensor system is based on PPS-proprietary TactArray technology, employing capacitive pressure sensors that continuously deliver accurate data after 1, initial calibration. One T-2000 can be configured with 16 to 256 sensor elements in array sizes up to almost 6 sq in. System specifications include full scale ranges of 3, 12, or 30 PSI, 0.15% static noise, and 1.0%...
Read More »Pressure Transducer is based on silicon technology.
Model DCT combines pressure sensing with stainless steel construction, which allows it to operate under extreme environmental conditions. It is available in pressure ranges from 6 to 500 psi, and is fully digitally compensated for effects of pressure and temperature changes. Transducer accepts unregulated and regulated excitation voltages, and provides output signals such as 1-5Vdc, 1-6Vdc,...
Read More »Acoustic and Thermal Solutions for Original Equipment Manufacturers
Technicon's products solve the most complex noise pollution and thermal problems and improve product marketability. Check out the video to learn more.
Read More »