Electrical Sensors / Detectors / Transducers

NK Technologies Presents AT/ATR-TH Series Current Transducer in Triple-Aperture Solid-Core Design
Electrical Sensors / Detectors / Transducers

NK Technologies Presents AT/ATR-TH Series Current Transducer in Triple-Aperture Solid-Core Design

The AT/ATR-TH Series Current Transducer is designed for monitoring three-phase loads, motors, machines, and buildings. The device can detect open discharge lines, clogged filters, or blocked intake to pumps in water delivery and treatment systems and over/under current conditions. It is powered externally with 24 VAC or DC (22–18V) and provides a choice of 0–10 to 0–200 A. The sensor mounts...

Read More »
New AGT-FD Ground Fault Sensor is Suitable for Measuring Earth Leakage Current
Electrical Sensors / Detectors / Transducers

New AGT-FD Ground Fault Sensor is Suitable for Measuring Earth Leakage Current

The AGT-FD Ground Fault Sensor from NK Technologies detects faults to earth from 0 mA to 100 mA and produces an output signal of 0–10 VDC in proportion to the current passing to ground. The unit can be used for measuring and monitoring any low-value AC circuit current. It is suitable for applications such as electric heating processes, AC motor loads, semiconductor wafer fabrication, plastic...

Read More »
New BES R01 Inductive Flatpack Sensors Feature Polyphenylene Sulfide Sensing Surface
Electrical Sensors / Detectors / Transducers

New BES R01 Inductive Flatpack Sensors Feature Polyphenylene Sulfide Sensing Surface

Balluff’s BES R01 Inductive Flatpack Sensors are designed for use in hostile conditions of welding environments. Units feature die-cast zinc housing and high-temp silicone cable jacket that protects conductors from weld-spatter burn through. The sensors come with weld-field immune option, which provides stable operation near electrical welding currents. Fortron PPS sensing face enables plant...

Read More »
New Sensors from Joral Come with Stainless Steel Housings
Electrical Sensors / Detectors / Transducers

New Sensors from Joral Come with Stainless Steel Housings

Joral’s Encoders and Sensors are offered with stainless steel housing option for protection against extreme temperature fluctuation, corrosive environments, and pressure wash down. The housing is available with J1 shafted, ProxEncoder® Non-Contact and Hockey Puck ™ Non-Contact rotary encoders and Z-series, incremental, absolute, SINC and DINC incline sensors. The sensors are rated to IP67...

Read More »
New LOOKOUT Voltage Detection Network Uses WAVi Work Area Voltage Indication Technology
Electrical Sensors / Detectors / Transducers

New LOOKOUT Voltage Detection Network Uses WAVi Work Area Voltage Indication Technology

LOOKOUT Voltage Detection Network is designed for detecting strong electric fields surrounding high voltage conductors and fleet equipment. The unit alerts operator when the energized conductors come close to prevent the risk of electrocution. The detector comes in water-resistant housing and can be placed on bucket trucks, digger derricks, pulling and tensioning equipment. Unit illuminates...

Read More »
New DT-FD Series Current Transducer Comes in One-Piece Design for Increased Safety and Accurate Installation
Electrical Sensors / Detectors / Transducers

New DT-FD Series Current Transducer Comes in One-Piece Design for Increased Safety and Accurate Installation

DT-FD Series DC Current Transducer is designed for monitoring circuits with voltages up to 1500 VDC, and up to 400 A and can be mounted on DIN rail or attached to back panel. Unit is suitable for monitoring large solar panel installations, motors in traction and drilling equipment, UPS and telecommunication towers. The transducer offers easy accessibility to supply, output-signal, and finger-safe...

Read More »
SENSOR WPS-MK88 U45R from Micro-Epsilon Are Magnetic Field-Based Non-Contact Potentiometers
Electrical Sensors / Detectors / Transducers

SENSOR WPS-MK88 U45R from Micro-Epsilon Are Magnetic Field-Based Non-Contact Potentiometers

SENSOR WPS-MK88 U45R is draw-wire sensor offering a maximum service life of 2 million cycles. Measuring displacement and position of components and machine parts, the sensors are suitable in OEM applications. Sensors are cost-effective and robust. Available in a compact design with high service life, the sensors ensure high performance. Applications include sectors where high cycle rates are...

Read More »
Monnit ALTA Wireless Sensor Solutions Now Available for Immediate Shipment from Digi-Key
Electrical Sensors / Detectors / Transducers

Monnit ALTA Wireless Sensor Solutions Now Available for Immediate Shipment from Digi-Key

THIEF RIVER FALLS, Minn., Jan. 4, 2018 - Monnit Corporation's portfolio of ALTA wireless sensor solutions is now available through Digi-Key Electronics, a global electronic components distributor, thanks to Digi-Key joining Monnit's new IoTvantage™ Premier Internet of Things (IoT) Partner Program. ALTA is the only wireless sensor platform available today that offers 1,000+ feet wireless...

Read More »
combiSENSOR is embedded with Ethernet and EtherCAT interfaces.
Electrical Sensors / Detectors / Transducers

combiSENSOR is embedded with Ethernet and EtherCAT interfaces.

combiSENSOR consists of eddy current sensor and a capacitive displacement sensor in one housing. Unit is used to determine thickness of plastic coating on metal sheets and measure applied adhesives. Product comes with controller and offers measurement accuracy. combiSENSOR features intuitive web interface and is suitable for plastic industry. Device enables user to measure electrically...

Read More »
Sentry Equipment Introduces New Compact Hygienic Automatic Sampler
Sponsored

Sentry Equipment Introduces New Compact Hygienic Automatic Sampler

As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.

Read More »

All Topics