Temperature Sensors / Detectors / Transducers

New SCD30 CO2 and RH/T Sensor is Based on Dual-Channel Principle
Temperature Sensors / Detectors / Transducers

New SCD30 CO2 and RH/T Sensor is Based on Dual-Channel Principle

New SCD30 Sensor Module incorporates CMOSens® Technology for IR detection and Sensirion humidity and temperature sensor. Unit’s dual-channel principle helps in measurement of carbon dioxide concentration. The module is offered with ControlCenter viewer software that allows displaying and logging of the sensor signals for multiple sensors connected on SensorBridges on the same PC.

Read More »
Latest SHTC3 Humidity Sensors are Suitable for Battery Powered Mobile or Wireless Applications
Temperature Sensors / Detectors / Transducers

Latest SHTC3 Humidity Sensors are Suitable for Battery Powered Mobile or Wireless Applications

Sensiron’s SHTC3 Humidity and temperature Sensors are available in 2 x 2 x 0.75 mm³ DFN package that consists of capacitive humidity sensor, a temperature sensor, analog and digital signal processing, A/D converter, calibration data memory, and a communication interface. Unit offers a measurement range of 0 to 100% RH (Humidity) and -40°C to 125°C (temperature) with accuracy of ±2% RH and...

Read More »
Helind Electronics Adds New NTC Types JI and JIC Thermistors Featuring an Overmolded Design
Temperature Sensors / Detectors / Transducers

Helind Electronics Adds New NTC Types JI and JIC Thermistors Featuring an Overmolded Design

NTC Type JI and JIC Thermistors are available in wire lengths of 300 mm to 5000 mm with sensor tip and flexible circular extension cable molded together. Units feature insulation made of thermoplastic elastomer rubber. These thermistors are compliant to RoHS standards and are suitable for outdoor and indoor environmental monitoring, HVAC system control, refrigeration, heat pumps and water heaters...

Read More »
Temperature Sensors / Detectors / Transducers

IST AG OBTAINS ESCC QUALIFICATION FOR THIN FILM PT TEMPERATURE SENSORS

April 2018, SWITZERLAND (HEADQUARTERS) Sensors made by Innovative Sensor Technology IST AG have been used in space projects since the mid-nineties. In February 2018, IST AG was awarded the ESCC (European Space Components Coordination) qualification for a thin-film based series of platinum temperature sensors. These sensors are currently the only platinum temperature sensors to receive this award...

Read More »
Micronor Fiber Optic Temperature Sensor Presentation at Sensors Expo, June 28, 2017 at 11am
Temperature Sensors / Detectors / Transducers

Micronor Fiber Optic Temperature Sensor Presentation at Sensors Expo, June 28, 2017 at 11am

Debuting at Sensors Expo (June 28-29, 2017), Micronor (Camarillo, CA USA) and Optocon AG (Dresden, Germany) have collaborated to create the FOTEMP1-OEM-MNT; a low cost, small form factor, single channel signal conditioner that seamlessly integrates Fiber Optic Temperature Sensing into any industrial control system, medical instrumentation or other OEM design. The compact FOTEMP1-OEM-MNT...

Read More »
Temperature/Humidity Sensor comes with touch-sensitive mode button.
Temperature Sensors / Detectors / Transducers

Temperature/Humidity Sensor comes with touch-sensitive mode button.

Featuring three-digit, seven-segment display with °F, °C and % indicators and character height of 0.39 in., Temperature/Humidity Sensor with 69 x 38 x 108 mm dimensions is wall mountable. Supporting applications from -4 to 140°F temperature range and 0 to 90% relative humidity, unit comes with touch sensitive LED light button. CAT5/5e/6/6a cable of 305 m can be connected between the sensor and...

Read More »
CHT-FS Series Sensors feature flexible stem design.
Temperature Sensors / Detectors / Transducers

CHT-FS Series Sensors feature flexible stem design.

Suitable for UAVs, light aircraft, power generators and motorsports applications, CHT-FS Series Cylinder Head Temperature Sensors are installed under spark plug or head bolt. Available for 10, 12, 14, or 18 mm OD bolts/spark plugs, units are operated in -40°C to +1000°C temperature range. Used for monitoring engine performance and critical over-temperature conditions, sensor’s stem design...

Read More »
ETS Series Temperature Sensors feature built-in 4-digit display.
Temperature Sensors / Detectors / Transducers

ETS Series Temperature Sensors feature built-in 4-digit display.

Combined with precision RTD sensing element, measuring electronics and process fitting in stainless steel transmitter probe, ETS Series Temperature Sensors feature pushbutton for setting up sensors. Designed with two solid state switch outputs, two yellow LED indicators, unit’s display can be electronically flipped 180° and housing can be rotated up to 310° after installation.

Read More »
EN1752 Temperature Detector comes with preconfigured set points.
Temperature Sensors / Detectors / Transducers

EN1752 Temperature Detector comes with preconfigured set points.

Used in server rooms, storage areas, refrigerators, freezers, and pipe chases for pre-freeze warnings, EN1752 Temperature Detector comes with programming software which is compatible with PCs running on windows 10 or higher operating system. Having 80°F and 40°F preconfigured high and low set points, units can be customized using programmable cable accessory (ACC17XX) and PC software...

Read More »
Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber
Sponsored

Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.

Read More »

All Topics