Position Sensors / Detectors / Transducers

New Rotary Position Sensors from NewTek Offer Accurate Angular Displacement Measurements
Position Sensors / Detectors / Transducers

New Rotary Position Sensors from NewTek Offer Accurate Angular Displacement Measurements

NewTek Sensor Solutions has released the RV series of RVDT Rotary Position Sensors. These sensors offer accurate angular displacement measurements of rotating elements such as quarter-turn ball and butterfly valves, actuators, throttles, and dancer arm tensioners. Features inlcude a shaft that rottes 360 degrees with no stops and little friction, shaft angle position measurements over a nominal...

Read More »
New RV Series of LVDT Displacement Sensors from NewTek Are Built for Rugged Conditions
Position Sensors / Detectors / Transducers

New RV Series of LVDT Displacement Sensors from NewTek Are Built for Rugged Conditions

NewTek’s new AC-operated RV series of displacement sensors feature non-contacting design for fewer wear parts, operate between -65 and 220 degrees F, and are shock and vibration tolerant for automation and packaging applications. Offering angular displacement measurement of rotating elements, the sensors have shafts that rotate 360 degrees, and can measure shaft angle position to a nominal...

Read More »
New Non-Contacting LVDT Position Sensors Offer Pressures Up to 20,000 psi
Position Sensors / Detectors / Transducers

New Non-Contacting LVDT Position Sensors Offer Pressures Up to 20,000 psi

The Non-Contacting LVDT Position Sensors from NewTek are designed for high temperature downhole drilling, wellbore case profiling and wire and cable line tension measurement applications. The hermetically-sealed units can withstand sulfides, acids, drilling mud and corrosive chemicals. They are constructed with special materials to provide reliable operations in temperatures up to 400°F. The...

Read More »
New Vert-X 2800 Series Sensors Feature J1939 CANBus, SPI and PWM Interface Options
Position Sensors / Detectors / Transducers

New Vert-X 2800 Series Sensors Feature J1939 CANBus, SPI and PWM Interface Options

The Vert-X 2800 Series Sensors are available in single and fully redundant versions with measurement ranging from 0 to 360° and a repeatability of 0.1°. The units are suitable for industrial, medical and off-highway vehicle applications and can be operated in -40 to +85°C temperature range. The sensors are offered in housing with base diameter of 28 mm and are sealed to IP 65. They provide up...

Read More »
NewTek Sensor Introduces M-375 Series Miniature AC LVDTs with Corrosion-Resistant Nickel-Iron Alloy Housing
Position Sensors / Detectors / Transducers

NewTek Sensor Introduces M-375 Series Miniature AC LVDTs with Corrosion-Resistant Nickel-Iron Alloy Housing

M-375 Series Miniature AC LVDTs are offered in measurement ranging from ± 0.025 to ± 1 in. with linearity of less than ± 0.25% over the full range. Units can be operated in -55°C to +135°C temperature range and the vented design equalizes pressure inside and outside the LVDT for an improved endurance to high pressure and temperature. The 3/8 in. diameter LVDTs are suitable for use in...

Read More »
New MTLT305D Sensor Module Offers 0.5 Degree Tilt and
Position Sensors / Detectors / Transducers

New MTLT305D Sensor Module Offers 0.5 Degree Tilt and

ACEINNA’s MEMS-based MTLT305D comes with accelerometers, gyroscopes and a temperature sensor providing accurate 3D acceleration, 3D rate as well as pitch and roll measurement. The MTLT305D comprises CAN J1939 & RS232 interfaces for network connectivity and an Ampseal 16, 6 position connector to supports 4.9 V to 32 V supply input range. The MTLT305D offers high reliability and has an operating...

Read More »
Novotechnik Launches the RFC4800 Series of Touchless Angle Sensors with CANBus Interface
Position Sensors / Detectors / Transducers

Novotechnik Launches the RFC4800 Series of Touchless Angle Sensors with CANBus Interface

Novotechnik introduces a series of touchless angle sensors with J1939 CANBus and CANopen interface. RFC4800 Series has a resolution of 14-bits across 360°, repeatability of 0.36° and linearity of ±0.5%. They have an operating temperature range from -40 to +125 °C and are sealed up to IP69K. The series is available with single and multi-channel versions with digital and analog output options.

Read More »
New P-Series LVDTs are Suitable for Use in Harsh Ocean Environments
Position Sensors / Detectors / Transducers

New P-Series LVDTs are Suitable for Use in Harsh Ocean Environments

NewTek’s P-Series of High-Pressure and Water Resistant LVDTs are suitable for reliable position measurements in deep subsea environments and high-pressure applications such as pressure test vessels and hydraulic actuators. Constructed of 0.52 in. diameter heavy-duty alloy, units can be operated at temperatures up to -65° to 400°F and pressures up to 20,000 psi. The sensor provide ratiometric...

Read More »
New ILPS-45 Linear Position Sensors Use Proprietary Inductive Technology
Position Sensors / Detectors / Transducers

New ILPS-45 Linear Position Sensors Use Proprietary Inductive Technology

ILPS-45 Linear Position Sensors are designed for measuring position of steam turbine valves, outdoors fastened to a building, bridge or structure. Units can be operated in -40C to 85°C temperature with a measuring range from 100 to 450 mm. The sensors come with double shaft seals and with optional mounting flanges, rod eye ends and connector or cable terminations. Units are offered in 44.5 mm...

Read More »
Dodge® Raptor Coupling Now Available in Three Larger Sizes
Sponsored

Dodge® Raptor Coupling Now Available in Three Larger Sizes

The Dodge Raptor coupling epitomizes the innovation and value that has made Baldor a world leader in industrial electric motors. For almost 100 years Baldor has been the go-to source for industries across the globe. The Raptor coupling is just one example of our dedication to engineered excellence and commitment to providing value and performance. See our video to learn more.

Read More »

All Topics