New Motor Controllers and Drives Products

Remote Pitch Control permits on-the-fly tuning.

Z-control option, available on RG rolling-ring linear drive assemblies, enables rapid adjustments to actuator pitch while system is in operation, without changing drive-motor rotational speed. Z-control knob turns worm gear, affixed to pitch control mechanism, to permit virtually infinite, fine tuning. RG linear-motion assemblies feature auto reverse, zero backlash, and up to 800 lb of axial...

Programmable Step Control offers 32 configurations.

Model S95 provides 32-in-1 resistance heating load control solution for OEM and replacement applications. It is designed for field-selectable input options including 2200 ohm, 135 ohm, 4 to 20 mA, and 0 to 10 Vdc. Unit offers selectable linear or progressive switching and proportional or deadband control capability. It utilizes vernier control to drive B-Series or S-Series power controllers, and...

DC Speed Control offers digital closed loop feedback.

MD Series MICRO-DRIVE, for motors rated to 2 HP, can precisely control speed to +/-0.5 rpm of set speed. It features adjustable acceleration and decleration ramp inputs, adjustable min and max speed values, and master or follower operational modes. On-board microprocessor includes non-volatile memory. Display is adjustable for intensity, decimal point position, and zero blanking. Universal power...

AC Drives include RS485 port for MODBUS RTU protocol.

GS1 mini AC drive, with 1/4 to 2 hp, 115 Vac/230 Vac input and 230 Vac output, has 3 to 10 KHz carrier frequency. GS2 micro drive offers 1/2 to 7.5 hp at 230 Vac input/output, or up to 10 hp at 480 Vac input/output, as well as programmable 1 to 12 KHz carrier frequency. Both units offer V/Hz control, 175% starting torque and 150% rated current for 1 min and include electronic-overload protection,...

Guide to Creating Color Cosmetics

This white paper provides an in-depth look on how to start a color cosmetic line.

Motor Control eliminates servo dithering.

SilverMax(TM) controller has anti-hunt mode that keeps servo motor from dithering after it reaches its target position. Anti-hunt mode can also be maintained at low speeds as long as position errors are low. System is suitable for applications such as positioning microscope, antenna or camera, or when smooth control is required while stopped or at low speeds.

Direct Drive handles oversized, mismatched loads.

SilverMax(TM) combines controller, driver, encoder, and ac brushless motor into single integrated package that can direct drive oversized inertial loads such as flywheels and belt driven slides. It is available in NEMA 17, 23, and 34 sizes, with UL/CE marks in both IP50 and IP65 ratings. PVIA(TM) control provides greater stability and accuracy than traditional PID servo control and achieves 100:1...

Servo Motor helps troubleshoot problems.

Smartstep servo motor provides constant torque through entire speed range and has autotune function that makes motor tuning easier. Installation is simple and quick with pre-fabricated cables that connect motor to company's position control modules. Pulse command input allows seamless upgrades from existing stepper systems. It assists in troubleshooting and maintenance when it has technical...

Motor Drive ICs cool fan motors.

FAN8404D and FAN8408D are 2-phase, half wave motor drive ICs capable of sinking 1.2 A motor load current, while requiring 2.2 mA supply current in stand-by. FAN8408D features Hall output (HO) for motor speed detection and FAN8404D offers alarm output to signal fan lockup. Operating voltages range from 4 to 15 V. Units include built-in thermal shutdown (TSD) circuits, reverse-current protection...

Digital Drives work with servo motors.

DR100EE Series can be used with brushed or brushless, rotary or linear servo motors. It has 20 kHz digital current loop that uses Space Vector Modulation (SVM) switching techniques that result in higher current loop bandwidth and lower heat dissipation. Drive configuration and tuning can be accomplished through graphical and intuitive Windows based utility using serial RS232/485 communication...

Microstepping Motor/Driver provides high-accuracy positioning.

Modular, open-framed Nanostep(R) CFKII Series 5-phase microstepping motor and driver is available in high-torque motor frame sizes: 1.1, 1.65, 2.36, and 3.35 in. sq. Holding torques range from 4.6 oz-in. (CFK533AT) to 890 oz-in. (CFK5913HAT), and position accuracy is rated at +/-3 arc-minutes. Unit provides 16 user-selectable resolution settings up to 125,000 steps per revolution. Open-loop...

Precision Fabricating with Over 40 Years of Experience

Quality Sheet Metal specializes in delivering precision, value, and customer service. With a client base that spans many diverse industries and a reputation for excellence that goes back over four decades, our clients know that we can provide the optimal combination of value and flexibility regardless of the challenge. See our video to learn what we can do for you. Through investments in state-of-the-art design, manufacturing, and quality control systems, Quality Sheet Metal remains focused on maintaining a high standard of quality, customer service, and competitive pricing. With an emphasis on customer satisfaction, Quality Sheet Metal is dedicated to establishing long-term partnerships, similar to the ones they currently have with their valued clients. If you're looking for a new partner with extensive capabilities in sheet metal fabricating and finishing, look no further.