Adjustable-Frequency Drives range from 1/2 to 5 hp.
VLTÃ-® MICRO Drives are offered in Ã-½-5 hp range for 230 Vac applications and 1-5 hp for 460 Vac applications. Digital keypad/display module is mounted to front panel. Units include programmable digital input and outputs, overload current to 150% of rated current for 1 minute, automatic voltage regulation, S-curve or linear ramp profiles, momentary power failure restart, and panel or...
Read More »
Motor Driver achieves 200,000 steps per revolution.
Equiangular INS20 NanoDrive(TM) Series is CE-rated and includes basic step of 1.8Ã-º and 16 resolution modes. Unipolar 2-Phase/4-Phase motor driver is available in AC and DC versions to power stepper motors in NEMA sizes 17 and 23 of the 4, 6, and 8 lead variety. Product's 16 equiangular resolution setting controls are programmable from 1/1 to 1/1000 step. Single intelligent torque chip in...
Read More »AC Drive incorporates vector control.
PowerFlex 700, equipped with Force Technology for field-oriented control, offers motor speed regulation of 0.001%, as well as torque regulation. Users are able to hold full torque at zero speed. Applications include high-speed drawing of copper tubing. Drive eliminates wall thickness variations, while maintaining max throughput. Available in global ratings from 0.5-150 hp and with voltage ratings...
Read More »Motor Controller includes soft-start protection.
Modular SMC-Flex(TM) is available in current ranges from 108-480 A, and voltage ranges from 200-600 Vac. Built-in line-monitoring capabilities allow for monitoring of 3-phase voltage, current, kilowatts, and system power factor. Bypass automatically closes when motor reaches nominal speed, resulting in cooler-running component. In addition to controlling motor starting torque, SMC-Flex prevents...
Read More »
Taking a New Product to Market: Outsourcing vs. Internal Product Development
To learn if outsourced new product development (NPD) is right for your needs, and how companies like Vollrath Manufacturing Services can help, download this white paper now.
Read More »AC Drive provides low speed torque control.
PowerFlex(TM) 40 is available in 115, 230, and 460 V for applications up to 10 hp. It uses sensorless vector control for powerful motor torque at low speeds. Configurable I/O performs basic logic, timer, and counter functions. Integral keypad includes 10 most commonly programmed parameters, and integral RS485 works with configuration and monitoring software. Drive can be DIN rail or panel...
Read More »
Intelligent Digital Drives connect via FireWire-®.
NDrives are offered in 10, 20, and 30 A PWM and linear versions with integral digital and analog I/O, support for square-wave and sive-wave encoders, 100 BASE-T Ethernet interface for I/O expansion, and 400 Mbs FireWireÃ-® communication interface. Drives provide deterministic behavior and auto-identification. They are offered with up to 12 opto-isolated outputs and 12 opto-isolated inputs,...
Read More »
DC-DC Drive maximizes crane performance.
Respondor DDC uses high-speed semiconductors to provide smooth acceleration and deceleration, reducing inrush of current. Stepped or stepless motions can be programmed to correspond with application needs. Stainless steel enclosure withstands harsh mill environments. Respondor DDC facilitates retrofits by retaining existing motor, collector system, series or shunt brake, power loss DB resistors...
Read More »AC Drives eliminate dynamic braking resistors.
Models E7 HVAC and F7 Vector drives include High-Slip Braking (HSB) software that controls motor deceleration, reducing overall braking time. For high-inertia loads, HSB can provide braking torque in excess of 100% full load motor torque. HSB is achieved by modifying volts/hz pattern during deceleration to maintain enough motor slip so load energy is absorbed in rotor bars, stator windings, and...
Read More »
Motor Controller reduces maintenance requirements.
Medium-voltage MOTORPACT offers protection based on compartmentalized construction that includes integral cable grounding switch and optional built-in arc resistance. Controller is capable of 5,000 operations with no maintenance. With main bus bar mounted directly onto isolation switch, MOTORPACT has fewer bolted connections. Infrared scanning ports are provided for scanning bus bar connections...
Read More »AC Drive operates with motors from 3 to 800 hp.
Model GT 300 Low Voltage AC Drive offers voltage range of 380 to 480, 575, and 690 V. Built-in software macros allow customization to user's process parameters. Process Tolerant Protection Strategy (ProToPS(TM)) software extends life of motor. Unit includes auto-tuning, flying start for powering into spinning motor, sensor-less vector control, trip-free operation, and auto restart. It complies...
Read More »
Triad WAU Wall Plug-In AC Power Supply May Be First To Meet Level VI Energy Efficiency Standard
Triad Magnetics, an industry leader and one of the most trusted names in transformer design and manufacturing, is proud to announce the release of the Triad WAU Wall Plug-In AC Power Supply. Engineered to provide robust performance and high reliability, it is setting the standard for 120V/60Hz power supplies. See our video to learn all about it.
Read More »
