New Motor Controllers and Drives Products

Power Drive comes with safety vise.

Portable, electric, CSA-approved Model 700PD provides power for threading pipe and conduit up to 2 in. in diameter. It uses R12+ Segmental dies and dropheads or Ridgid(TM) 12R dies and dropheads. Model 700PD 1/2 HP drive is double insulated, with mechanical forward/reverse switch of 25 RPM. Switch is neoprene sealed to keep dirt out. Vinyl-coated vise handle provides electrical safety.

Variable Frequency Drives control ac induction motors.

EagleDrive1(TM) Series and EagleDrive3(TM) Series provide variable speed control of single-phase and 3-phase motors, respectively. EagleDrive1 is available in 115 V and 230 V at power levels up to 1.5 hp. EagleDrive3 is available in 200-240 V at power levels up to 3.0 HP, and in 380-480 V at power levels up to 120 HP. Drives have pushbutton keypad, simple programming, 95% drive efficiency,...

Variable Speed Drive controls 2 to 4 pump systems.

PumpSmart Model PS 200 microprocessor based, variable speed drive is programmed specifically for centrifugal pumps up to 700 HP. Control of process parameters is obtained by continuous monitoring and reaction to both pump conditions and system demands. Pump output is matched to exact flow and head required by process. PS 200 protects pump from dry running, low suction, cavitation, dead heading...

Motor Drives are available as packaged units.

VLT(R)2800 Series drives are available as fuse and/or disconnect package, and bypass package. Both include drive, keypad and display in NEMA 1 steel enclosure. Fuse/disconnect package has rotary disconnect that allows input line to be disconnected, or drive fuses that protect drive. Bypass package includes 2- or 3-contactor bypass to electrically select whether motor is driven by drive, connected...

Caps & Plugs Designed for Peace of Mind

Download this engineering guide to learn more about the different caps and plugs offered, and to find the correct solution for your specific application.

AC Drive provides motor control in wash-down applications.

Model 160Z AC drive is designed for mounting on most standard AC motors. It offers NEMA 4X/IP65-rated protection and network connectivity. Drive is available with 4 different communication modules, including DeviceNet(TM), RS-232C, Profibus-DP and InterBus-S. It includes fault history for system diagnostics, elapsed time meter, feedback on specific drive and load conditions, and programmable...

Servo Drive provides CANopen communications.

DigiFlex(R), with multiple, programmable, analog and digital inputs and outputs, controls brushed or brushless servomotors. It uses DSP technology to close digital current, velocity, and position loops. Position and velocity loops use encoder, Hall sensor, resolver, or analog feedback. Built-in CANopen interface complies with DS301 and DSP402 standards. Output capabilities range from 15 to 100 A...

Stepping Motors come with on-board drivers.

MDrivel4 has NEMA size 14 stepping motor with half/full step drive, suitable for situations with space constraints. MDrive34 has NEMA size 34 high torque stepping motor with 24 to 75 V microstepping drive electronics, suitable for applications such as packaging, or applications using servo motors or gear box. Options include encoder or knob for manual positioning. Also available are MDrive23 and...

HVAC Drive provides integrated damper control.

Side-by-Side electronic bypass/drive fits into air-handling units and pumping packages, making it suitable for single-motor HVAC fan and pump applications. Bypass/drive signals damper to open and waits until it receives confirmation that damper is fully open, before allowing motor operation. Drive is available in plenum-rated NEMA 1 or NEMA 12 enclosure. Windows(R) tool facilitates set-up,...

Controller/Driver controls 4 stepping motors at once.

Integrated MCB-4B board simultaneously controls up to 4 stepping motors with mini-step capability, and with 4, 6 or 8 leads and up to 3 amp phase current. Each axis is addressable, and several boards can be controlled by single computer communication port. MCB-4B offers stepping rates up to 50,000 step/sec and up to 16.7 million steps per move. It includes programmable acceleration/deceleration,...

Servo Drive connects via CANopen interface.

DC201E25A20NAC digital servo drive uses CANopen communications for use in networking applications. Built-in interface complies with DS301 and DSP402 standards. Drive uses DSP to close digital current, velocity, and position loops for controlling brushed or brushless servomotors. Position and velocity loops can use encoder, Hall sensor, or analog feedback. Drive has output of 25A peak, 12.5A...

Material Handling Solutions from Global Leader in Rubber & Urethane Power Transmission

Megadyne's QST polyurethane timing belts take up less space and guarantee a lower noise level than chain and other traditional material handling belts. Check out our video to learn more.