New Motor Controllers and Drives Products

Belt Drive Systems hold up to 598 lbs in axial orientation.

Capable of speeds up to 196 in./sec with stroke lengths to 12 ft, REDI-RAIL BELT DRIVE SYTEMS can integrate into existing linear motion applications by using T-slot mounting system and NEMA motor mount blocks. They feature aluminum base structures and hardened steel raceways. Guidance systems or carriages offer 3 dual row ball bearings. Center roller is adjustable for preload via set-screws...

Regenerative Drive offers dual voltage (115/230 Vac) input.

RG60U is available for 1/8 to 1 hp motors, or up to 2 hp with optional heatsink. It includes enable and inhibit terminals with option to invert functions. Invert jumpers allow user to decide if drive runs or stops when terminals are opened or closed. RG60U offers tacho-generator or armature feedback, 9 trimmer pots, cage clamp and screw terminal blocks for secure connections, and current limit...

Spray Head Assembly operates on threadless shaft.

Spray Head Drive Assembly provides automatic, instantaneous reversal without electronic controls or programming. No adjustments to motor's speed or rotational direction are needed to change travel direction or linear speed. Assembly eliminates backlash because linear drive uses rolling ring bearings. Axial thrust capability ranges from 6 to 800 lbs, depending on model selected. Travel speed is up...

Drive Enclosure suited for outdoor HVAC applications.

NEMA Type 3R enclosure, designed for GPD 506/P5 AC drive, is free-standing, self-contained, and heat-resistant. It withstands harsh conditions in remote installations with no adverse effects on drive operation. Unit includes integral space heater; appropriately sized fans; fan rain hoods, filtered and shaped to protect from water ingestion; externally mounted heat sink with debris shield; and sun...

5 Questions to Ask When Choosing a Custom Glass Manufacturer

Due to the inherent complexity of glass fabrication, many professionals seeking glass services know exactly what kind of part is needed, but are unclear on the intricacies of the actual manufacturing process. PEG's exclusive guide is designed to help professionals navigate the custom glass manufacturing process with valuable information.

Controller/Driver handles stepping motors.

Model SMC-32, with over-current and over-temperature protection, controls any 4-, 6-, or 8-lead, 2/4-phase stepping motor with currents up to 3 A per phase. Measuring 4 x 3.75 x 1.5 in, it requires no additional heatsinking and offers expandability to multi-axis motion control, mini-stepping, and manual jog inputs.

Motor Controllers suit battery powered vehicles.

AC Induction Models 1230, 1236, and 1238 are designed for 24 to 80 volt battery systems, with 60 to 800 Arms 2 minute current ratings. Lower power Model 1230 satisfies requirements of small EVs. Models 1236 and 1238 are CANbus-compatible for mid range and larger EVs. They include Vehicle Control Language (VCL) and employ Flash programmable memory that can be erased and re-written many times. All...

Control Module provides real-time control execution.

Model SB1292D Control Module offers dual-axis control for brush, brushless (AC servo), and AC induction motors. Rated at 120 Vac (direct off line), it combines programmable motion control and all-digital drive. Multiprocessor, distributed-control design has 20 MHz Intel processor for task management and dedicated 80 MHz SB2500 Servo Processor per axis. Software offers dual-loop control,...

Drives incorporate Optimal Braking(TM) technology.

CFW-09 Vectrue(TM) adjustable speed drives offer V/Hz sensorless vector and closed-loop vector control. Alphanumeric keypads allow users to match control mode to application. Drive family ranges from 1 1/2 to 500 hp. Three units may be connected in parallel to serve motors up to 1,500 hp. Features include 7-segment LED; 2-line, 16-character LCD; 32-bit RISC microprocessor; and digital and analog...

Digital Servo Drives provide precision motion control.

RS232/485 digital drives work with brushed or brushless, rotary or linear servomotors. Its 20 kHz digital current loop uses Space Vector Modulation switching resulting in higher current loop bandwidth and lower heat dissipation. Sinusoidal, encoder based, commutation of brushless motors results in low torque or force ripple, making them suitable for high-precision motion control applications....

Servo Drives are immune to phasing and electrical noise.

Kinetix(TM) 6000 servo drives offer fiber optic SERCOS interface digital drive link between drive and controller, which eliminates up to 18 discrete wires per axis. Built-in smart motor technology provides automatic identification of specific motor configurations. Units are available with 230 and 460 V ratings. Kinetix 6000 drives offer velocity bandwidth greater than 400 Hz and current-loop...

TPA Motion Introduces Industry's First Compact Robotic Positioner for Medical Devices

TPA Motion's microplate handling robots are designed specifically for medical instruments and lab automation devices. Check out the video to learn more.