Materials

Cards

Interface Card connects computer to 2 networks.

SST-DNP-104-2 connects PC/104 computer to 2 DeviceNet networks. It includes DeviceNet Network Analyzer and Monitor diagnostic software tools, DeviceNet Node Commissioning tool, and OPC server. Card allows simultaneous execution of Group 2 Client and Server operation. All DeviceNet standard baud rates are supported including 125, 250, and 500 Kbaud. DeviceNet compliance is ensured at card level...

Read More »
IPG Strips measure wide range of pH.
Miscellaneous Strips

IPG Strips measure wide range of pH.

Micro-Range ReadyStrip immobilized pH gradient strips span total range of pH 3.9-8.3 using four gels. Gradient overlap of 30% between strips provides enough overlap for gel matching while avoiding excessive redundancy. Individual ranges are pH 3.9-5.1, 4.7-5.9, 5.5-6.7, and 6.3-8.3. Strips are clearly and permanently labeled to mark anode and pH range. Each strip is available in lengths of 7, 11,...

Read More »
Shielding

Lead Foil Tape masks, shields, seals, and decorates.

Model 243-L can be used for masking electroplating, X-ray plates and chemical milling; in shielding as radiation barrier; as sealant for radioactive canisters; and as decorative product and assembly aid for stained glass windows. It has lead thickness of 0.004 in., peel strength of 35 oz/in. of width, breaking strength of 10 lb/in. of width, elongation at break of 15%, and shelf life of one year.

Read More »
Metalizing Ceramics are available for beryllium oxide discs.
Ceramics

Metalizing Ceramics are available for beryllium oxide discs.

Thick-film metalizing and sputtered thin-film metalized patterns are available for company's line of BeO discs, discs with flats, washers, and heat sinks. Thick-film metalizing techniques include screen printing, spraying, and roller coating. Sputtered thin-film metalized patterns permit tightly spaced lines to be applied to fired ceramic substrate. Patters use molybdenum-manganese refractory...

Read More »
Polymers

Polymer withstands 50°F more than standard PEEK polymer.

PEEK-HT(TM) polymer is suited for applications requiring high-temperature resistance. With glass transition temperature of 315°F and melting temperature of 703°F, semi-crystalline, unreinforced polymer offers chemical resistance and Rockwell (R-scale) Hardness of 108.2. Tested and proven in down hole and sub sea environments, it offers long-term creep and fatigue resistance over its...

Read More »
Foams

Crosslinked, Polyolefin Foams suit gasketing applications.

Tough enough to suit low profile mounting applications, Volara HPT foams can also replace screws, rivets, and pumpable (caulk) adhesives in various assembly applications. Roll lengths of 4,500 ft can be produced without gauge banding, resulting in fewer roll changes for converters. HPT foams range in thickness from 0.012 to 0.075 in., and densities range from 8 to 20 lbs/ftÂ-³. Standard...

Read More »
Safe Seal Materials protect drinking water systems.
Gaskets

Safe Seal Materials protect drinking water systems.

Sealing materials meet NSF Standard 61 protecting potable water from contaminants that leach or migrate into water from traditional components. Organic materials include 10 EPDM compounds, 7 thermoplastic elastomers, and 2 nitrile compounds that can be formed into faucet and shower gaskets, water filter gaskets, valve seals and seats, pipe coupling seals, and diaphragms and O-rings used in pumps,...

Read More »
Miscellaneous Compounds

Custom Compounds produce speckled parts.

Speckled Dyneon(TM) Custom PTFE Compounds are produced by mixing PTFE with inorganic or organic fillers, which improve wear and abrasion resistance, reduce deformation under load, and add color. Compounds are offered in free-flow and pre-sintered grades. Speckled parts feature temperature resistance up to 500°F.

Read More »
Machine-Leveling Shim adjusts in tiny increments.
Shims

Machine-Leveling Shim adjusts in tiny increments.

Adjustable MicroShim for machine leveling, positioning, and mounting, provides height increments of 0.001 in. over range of 1.0 in. Pair of overlapping wedge plates, with machined surfaces, permit plates to slide parallel to one another. Stainless steel bolt and bar-nut assembly allows user to adjust relative position of plates and set desired height. Shims can be permanently locked into place...

Read More »
Solder Paste joins hard-to-solder materials.
Solder

Solder Paste joins hard-to-solder materials.

SolderPlus with WS421 flux offers aggressive flux chemistry that provides suitable bonding strength for mechanical assembly applications. Available in lead-free and tin/lead solder paste alloys, it is prepackaged in EFD syringes for precise application with automatic dispensing equipment. Solder paste works successfully on hard-to-solder materials such as stainless steel 304 and 316, Nichrome,...

Read More »

All Topics