Horizontal Machining Center offers 5-axis machining.
Model FA630, with 40 hp, direct-drive, 50-taper spindle, provides infinitely variable speeds between 15 and 6000 rpm. It is also offered with 5000 rpm geared headstock for high-torque, low-speed applications. Boxway design allows FA630 to reach cutting and positioning speeds of 1417 ipm. Pressurized lubrication system rests loaded pallets on micro-thin 0.00012 in. film of lubricant. Spindle...
Read More »
Horizontal Machining Center includes vertical pallet pool.
FA630 features 3-level, 15-station vertical pallet pool, which stocks enough work to support unmanned shift, enabling round-the-clock operation. It has boxway design with maximum rigidity for heavy-cutting applications. Pressurized lubrication system provides positioning and cutting speeds of 1417 ipm. Tools up to 33 lbs are exchanged in less than 2 seconds, with heaviest 60 lb tools taking just...
Read More »
Machining Center includes 204-tool magazine and software.
Model FA550 horizontal machining center, with stationary tool storage rack, accommodates up to 340 tools. Magazine handles tools up to 8.5 in. and 80 lbs. Tool gripper, driven by servo motor, travels at 80 ipm. OP Supporter software provides overview of tool magazine and confirms that right sub-programs and tools are ready for each job. Tool change speed is automatically adjusted according to...
Read More »
Machining Center And Fixturing Solution suit automotive industry.
Bobcat(TM) hybrid kinematic ballscrew-driven horizontal machining center offers 3- or 4-axes or transfer module, acceleration to 2.8 g, and transverse rates to 80 m/min. Mach 1 twin-spindle horizontal machining center offers on-floor tool changer accessibility, and is available as 500 x 500 mm pallet-size machine. Automated Intelligent Fixturing System incorporates self-adjusting capabilities....
Read More »
Air Amplifiers and How They Work
Air amplifiers are pneumatically driven devices that use shop air to provide the motive power for increasing air pressure. This white paper provides an in-depth overview into the air amplifiers and how they work.
Read More »
Machining Centers have twin spindles.
MCT 160 and MCT 250 both have twin spindles with dedicated B axis for each spindle, allowing simultaneous machining on four sides of two different parts. Both models have twin automatic toolchangers with servo-driven lift and rotate systems. Working envelopes for each spindle are 450 x 450 x 450 mm for MCT 160 and 690 x 690 x 520 mm for MCT 250. Maximum part sizes for the MCT 160 and MCT 250 are...
Read More »
Machining Center handles heavy, box-shaped components.
Model YBM-10T Precision Center, capable of high-speed positioning of 45 m/min, uses twin ball screws on each of 3 axes. Ball-screw and twin servo-drive system provide vertical movement and straightness of head stock. Axial/radial combination roller bearing on B-axis allows components up to 5 tons to be rotated and positioned. Hybrid system offers load sensing and surface pressure compensation...
Read More »
Machining Center provides multi-tasking.
Integrex e-410H can turn solid block of material into completed part. It features electronic communication tools for integrated production management functions. Machine provides 1,969 ipm rapid traverse rate, and X and Y axis stroke of 29.13 and Ã-
Read More »
Machining Center has 50 taper spindle and 25.2 in. pallet.
Model a81 Horizontal Machining Center (HMC) diminishes out-of-cut time with ring-type, 40-tool magazine, automatic tool changer, with 1.7 second tool-to-tool change times. Capable of handling payloads to 3,300 lbs, it offers 10,000 rpm spindle equipped with 300 psi through-spindle coolant system. Traverse and cutting rates are 2,362 ipm. Model a81 is capable of simultaneous B-axis movement with...
Read More »
Horizontal Machining Center reduces non-cutting time.
HMC 95, with 500 x 400 mm pallet, offers rapid traverse of 1970 ipm, acceleration of .7 g, and 4 sec chip-to-chip tool change. High torque, 2-speed spindle or high-speed 16,000 rpm spindle is available. Standard 360,000 position table has rotary indexing speed of 40 rpm. HMC 95 features 4 sigma accuracy of .0003 in. positioning and .00015 in. repeatability. It includes 50-tool magazine, Siemens...
Read More »
Machining Center offers accuracy better than ISO 10791-4.
u-4800 HMC features 40 hp spindle able to accelerate from 0 to 15,000 rpm in 1.9 sec. Rapid traverse rates and max feed rate are 2,362 ipm with 1 G acceleration. Automatic Tool Changer produces 2.5 sec chip-to-chip tool change time. Two-pallet changer machine has 15.7 in. square pallet and pallet change time of 5 sec. X, Y, Z axis strokes are 22, 24.8, and 23.6 in. respectively.
Read More »
Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions
Triad Magnetics is an established leader in power supply innovation, offering product lines that span a wide range of diverse industries and applications. Adding to their long list of successful product launches, Triad announces the release of the new cutting-edge JSU Series of power supplies. To learn about all of its advantages and advanced features, see our video.
Read More »
