Fluid Bed Dryer With Inlet Tray prevents infeed blockages.
Miscellaneous Trays

Fluid Bed Dryer With Inlet Tray prevents infeed blockages.

Offered asÂ- custom option on new machinery or retrofit for Witte units already in field, airslide inlet tray is installed within infeed section where material enters drying system. Directing heated airstream through openings in stainless steel plate that face downstream and parallel to infeed deck prevents sticky materials from clumping at entry of vibrating fluid bed dryers and coolers....

Read More »
Hopper Bank incorporates central closed loop conveyance.
Miscellaneous Controls

Hopper Bank incorporates central closed loop conveyance.

Offering flexible solution for molders running multiple resins, Hopper Bank features integrated central conveyance system and supports on-the-fly changeovers. Manifolds let operator switch from one hopper to another or connect multiple machines to one drying hopper, while closed loop conveyance and line purge keep material lines clear and resin dry at throat. Systems are available for up to 10...

Read More »
Blank Feeder features fully automated tooling change.
Miscellaneous Controls

Blank Feeder features fully automated tooling change.

Based on CompactTransfer and designed for blanks up to 4,100 x 2,100 mm, HighSpeedTransfer (HST) employs linear servo technology and comes with press simulation software that determines safest, most efficient travel curve. AtÂ- 6 m distance between press centers, up to 15 strokes/min are feasible. Respectively, theoretical max acceleration for horizontal and vertical axis is 25 adn...

Read More »
Parts Feeders

Single-Arm Feeder handles payloads up to 100 kg.

Used in conjunction with intelligent GMotion control system, roboSpeed Single-Arm Feeder simplifies jig making. Large-scale press lines have capacity of 21 parts/min. Feeder is used for loading first press, unloading last press, and handling transfer of parts from one press to another. Because itÂ- is particularly compact, roboSpeed exploits confined spaces of tool room.

Read More »
Materials Feeders

Digital Press Sheet Feeder enables dual-mode finishing.

When connected to HP Indigo digital presses and other equipment with right-to-left paper paths, left-exit Bourg Sheet Feeder enables dual mode production.Â- Unique feature allows finisher to operate both in-line and off-line while connected to press, or as near-line intelligent standalone finisher. On finishing side, feeder can connect with Bourg Bleed Crease Module and Bourg Booklet Maker,...

Read More »
Tandem Sheet Feeder enables non-stop finishing.
Materials Feeders

Tandem Sheet Feeder enables non-stop finishing.

Able to operate in-line or off-line, Tandem Bourg Sheet Feeder pairs 2 feeders alternatively feeding printed sheets under program control to any compatible automatic booklet maker, binder, or other finishing device. While one tandem Bourg BSF feeder is being loaded or ready to go, other can feed printed covers and content up to 26 x 14.3 in. at full-rated speed of finisher. Operating at speeds up...

Read More »
ARKU Exhibits New High-speed Servo Press Feed and Demonstrates Parts Leveling with New User-friendly Control
Materials Feeders

ARKU Exhibits New High-speed Servo Press Feed and Demonstrates Parts Leveling with New User-friendly Control

Hi-Speed ServoMaster® press feed handles strip up to 600 mm2 cross section at velocities up to 200 m/min with ±0.1 mm accuracy. New control on FlatMaster® parts leveler requires just two parameters to produce dead-flat, stress relieved parts. CINCINNATI, Ohio –Â- ARKU Coil Systems, Inc. will showcase its new Hi-Speed ServoMaster® press feed system at FABTECH. The...

Read More »
Multiple Screwdriver System Increases Productivity
Fastener Drivers

Multiple Screwdriver System Increases Productivity

A machine builder contacted Design Tool Inc. for automated components to feed and drive 6 or 10 screws for a garage door application.Â-  The components were required to drive the screws simultaneously, and the feed mechanism had to deliver the screws within the machine cycle time to maintain the production rate.  The screws also needed to be driven to a consistent torque on all...

Read More »
Materials Feeders

Coperion K-Tron, Hosokawa, and Sly to Present Complimentary Technical Seminar and In-house Product Demonstrations on Milling and Material Handling - October 14 & 15, 2014 at Hosokawa Facility, Summit, NJ

Coperion K-Tron, together with Hosokawa Powder Micron Systems and Sly, Inc. will host a complimentary in-house demonstration on milling and material handling for chemical, food, pharmaceutical, and mineral applications. The event will be held on October 14 and October 15 (offered twice for convenience) at Hosokawa's Summit, New Jersey facility.Â-  Coperion K-Tron will present on key...

Read More »
COE Service Team Gives New Life to Viking's Press Feeds
Materials Feeders

COE Service Team Gives New Life to Viking's Press Feeds

Smoke and water damaged equipment restored like new Sterling Heights, Mich. – When custom metal stamper Viking Inc. (Columbia City, Ind.) suffered a factory fire earlier this year much of the equipment escaped the flames, but was rendered inoperable by the smoke and water damage from its fire protection system. This included two COE Press Equipment servo roll feeds with control panels that were...

Read More »

All Topics