DC/DC Converters have 1% output noise of output voltage.
Dual output HW family DC/DC converters consists of 9 models ranging from 5 to 6 watts of output power in 24-pin DIP. Models are self-contained with input and output filtering. HW models offer 2:1 input range; 9 to 18, 18 to 36, or 36 to 75 Vdc. Outputs are +/- 5, 12, or 15 V with currents of +/- 500, 250, and 200 mA, respectively. Converters are isolated input to output with isolation voltage of...
Read More »
Dual Output DC-DC Converters operate from -40 to 85 deg C.
NKA Series 1 W converters are supplied in sub-miniature, 14-pin DIP packages and are available for 3.3, 5, and 12 V input voltages. Output voltage options of 12 and 15 V are offered for 3.3 V input model, while 5V and 12 V input parts can be supplied with voltage options of 5, 9, 12, and 15 V. Galvanic isolation of 3 kVdc reduces switching noise. Internal SMD construction uses multilayer ceramic...
Read More »
DC/DC Converters have synchronous rectifier design.
Half-brick EXB100 100 W modules, available with single outputs, include: 5 V model rated at 20 A; and 3.3 V and 1.8 V models rated at 30A. The 1.8 V model can be trimmed down to just 1.08 V, yet still deliver full 30 A rated output. Input voltages range from 36 to 75 Vdc, with 1500 Vdc isolation rating. Converters include remote on/off facility, and are protected against over-voltage,...
Read More »
DC/DC Converters provide 75 watt triple output.
HE Series converters are packaged in 1/2 brick case and provide 3 regulated DC outputs. Input ranges are 18 to 36 Vdc and 36 to 75 Vdc. Primary output voltages are 3.3 V at 20 A or 5 V at 15 A, and auxiliary outputs are +/-12 or +/-15 V at 2A. Units include isolation voltage of 1544 Vdc from input to output, switching frequency of 430 KHz, and thermal shutdown with auto restart for fail safe...
Read More »
Vertical Integration vs. Outsourcing
This white paper gives an overview into key industry trends and insights regarding vertical integration vs. outsourcing and understanding how they differ.
Read More »
DC/DC Converters provide efficiencies above 90%.
V7PC-04C Series non-isolated boost DC/DC converters provide 5 V power from 3.3 V source. They operate over 3.0 to 4.0 V input range, while providing maximum output current of 4 A. Available with or without remote on/off feature, step-up units allow operation to 70 deg C with no derating. Converters feature single-in-line package, fixed-frequency operation, and overvoltage and short circuit...
Read More »
DC/DC Converter takes up small amount of DIN-rail space.
CP-DCDC 50 W family is available with 12 or 24 Vdc inputs, and has outputs including 5 Vdc @8 A, 12 Vdc @3 A, and 24 Vdc @2 A, with continuous short-circuit protection on output, and over and under voltage protection. Status indication is standard. Slim unit occupies only 2 1/4 in. of DIN-rail space. Module, with metal housing, mounts on TS 35 DIN rail. Optional chassis-mount hardware is...
Read More »
DC/DC Converters suit low voltage applications.
PowerQor(TM) Tera Series half-brick isolated DC/DC converters include output voltages of 15, 12, 5, 3.3, 2.5, 2.0, 1.8, 1.5 and 1.2 V. All units draw power from 48 V nominal input and deliver 60 amps or 165 watts output. Typical efficiency for 1.2 V module is 88% at half-load (30 A) and 84% at full load (60 A). It provides full 60 A of output current at up to 70 deg C, and 200 LFM airflow with no...
Read More »
DC-DC Converter generates regulated output.
Switched-capacitor ZXCP330E6 provides 3.3V output from 2 to 4.4 V input with maximum load current of 40 mA. Short-circuit and thermal-overload protected, SOT23-6 packaged converter suits lithium-ion and alkaline battery-powered products. Operating with flying capacitor of 220nF and 10 microF bypass capacitors at input and output, typical PCB area requirement is 8 x 5.3 mm. It draws 20 microA...
Read More »
DC-DC Converters do not require heat sink.
Dual output, NKA03 3.3V subminiature DC-DC converters allow any distribution of load across outputs as long as total does not exceed 1W. Galvanic isolation of 3kVDC between input and outputs ensures minimum switching noise. Typical line regulation is rated at 1%, while typical ripple and noise current ratings are 30mA (peak-to-peak). Converters are supplied in fully encapsulated, UL 94V-0...
Read More »DC/DC Converters suit board-level applications.
CostCutter converters are available in SIP/DIP and modular packages, providing output power over range of 0.75 to 60 watts. Units accept single-range and 2:1 range inputs from 4.5 to 72 Vdc, which provide single and dual outputs from 3.3 to 15 Vdc. All models contain short circuit protection and internal input filter. CostCutter Series will operate over ambient temperature range of -25 to +71Ã-
Read More »
5 and 13 Micron Resolve Columns with Greater Bed Stability
Jordi Labs provides materials solutions that set the standard for innovation and quality. Our line of GPC and GFC columns are on the cutting edge of precision manufacturing and a result of our uncompromising commitment to quality and customer service. See our video to learn more.
Read More »
