Digital Hybrid DC/DC Controllers support PMBus(TM).
Providing point-of-load conversion for FPGAs, DSPs, ASICs, and processors, Model ISL68200 with integrated MOSFET drivers and Model ISL68201 with PWM output simplify power supply designs for data centerÃ- equipment. ISL68200 can drive external MOSFETs directly, while ISL68201 is paired with DrMOS power stage to create complete voltage regulator solution. Both leverageÃÂ R4 modulation...
Read More »
DC/DC Controller has 3.8-65 V operating range.
Supplied in 8-pin, 6 x 6 x 0.9 mm VQFN package, LM5140-Q1 incorporates features designed to reduce EMI and high-frequency noise in high-voltage DC/DC step-down applications. This dual-channel, synchronous buck converter uses external MOSFETs to support up to 10 A dual-channel loads and features dual outputs with phase interleaving. Adjustable gate-drive slew-rate control, 2.2Ã- MHz operation...
Read More »Switching Power Module suits vertically constrained systems.
Supplied in 10 x 6 x 2 mm thermally enhanced QFN- package that incorporates magnetic inductors and passive components, Model MIC45404 is designed specifically for height-constrained telecom, industrial, and SSD applications. Point-of-load buck converter, rated at 19 V and 5 A, integrates controller, MOSFETs, feedback path, and PWM switching regulator. Suitable for placement on back of PCB or on...
Read More »Switching Power Module suits vertically constrained systems.
Supplied in 10 x 6 x 2 mm thermally enhanced QFNÃ- package that incorporates magnetic inductors and passive components, Model MIC45404 is designed specifically for height-constrained telecom, industrial, and SSD applications. Point-of-load buck converter, rated at 19 V and 5 A, integrates controller, MOSFETs, feedback path, and PWM switching regulator. Suitable for placement on back of PCB or...
Read More »
Why Use A Locking Cord?
Learn about the benefits of using locking cords in applications that rely on extensive technological infrastructures.
Read More »
PoL DC-DC Converters feature high power density.
Murata has added an expanded range of digitally controlled, PMBus™ compatible OKDL products to Murata Power Solutions Okami™ series of non-isolated point-of-load (PoL) DC-DC converters. The OKDL-T/6-W12, OKDL-T/12-W12, and OKDL-T/18-W12, delivering 6, 12, and 18A respectively, are capable of being monitored and configured via PMBus™ communications. Exhibiting versatility, the new models...
Read More »
PoL DC-DC Converters feature high power density.
Murata has added an expanded range of digitally controlled, PMBus™ compatible OKDL products to Murata Power Solutions Okami™ series of non-isolated point-of-load (PoL) DC-DC converters. The OKDL-T/6-W12, OKDL-T/12-W12, and OKDL-T/18-W12, delivering 6, 12, and 18A respectively, are capable of being monitored and configured via PMBus™ communications. Exhibiting versatility, the new models...
Read More »DC/DC Converter is optimized for efficiency, thermal management.
With thermal-derating profile- that suits environments with high ambient temperatures or limited airflow, PKB4313D builds on Hybrid Regulated Ratio topology and offers up to 25 A and 300 W to deliver tightly regulated voltages to POL DC/DC regulators. Through-hole and SMT versions, suited for intermediate bus conversion applications in telecom and networking sectors, deliver typical...
Read More »
Medical DC/DC Converters offer 2 x MOPP, patient leakage to 2 µA.
XP Power today announced the JHL & JHM series of encapsulated, isolated and regulated DC-DC converters for medical applications. Available with single and dual outputs, the 3 Watt JHL03, the 6 Watt JHL06 and the 15 Watt JHM15, are all packaged in industry-standard format cases. Their size is model dependant, ranging from an industry standard DIP-24 for the JHL03 and JHL06 through to 1.6 x 1.0 x...
Read More »DC/DC Converter is optimized for efficiency, thermal management.
With thermal-derating profileÃ- that suits environments with high ambient temperatures or limited airflow, PKB4313D builds on Hybrid Regulated RatioÃÂ topology and offers up to 25 A and 300 W to deliver tightly regulated voltages to POL DC/DC regulators. Through-hole and SMT versions, suited for intermediate bus conversion applications in telecom and networking sectors, deliver typical...
Read More »
Medical DC/DC Converters offer 2 x MOPP, patient leakage to 2 -µA.
XP Power today announced the JHL & JHM series of encapsulated, isolated and regulated DC-DC converters for medical applications. Available with single and dual outputs, the 3 Watt JHL03, the 6 Watt JHL06 and the 15 Watt JHM15, are all packaged in industry-standard format cases. Their size is model dependant, ranging from an industry standard DIP-24 for the JHL03 and JHL06 through to 1.6 x 1.0 x...
Read More »
Does Your Parking Lot Make a Good First Impression?
To enhance its appearance by removing oil stains, Terminator-HSD uses micro bacteria to remove the stain without harsh chemicals, acids, or detergents. Check out the video to learn more.
Read More »
