DC/DC Converters offer three output voltages.
Consisting of 12 models with input ranges from 18-36 and 36-75 Vdc, LT converter family offers 3 regulated positive output voltages ranging from 5-1.5 V. Each output is rated at 10 A, with up to 75 W max power rating for all 3 outputs combined. Housed in Ã-½ brick case measuring 2.4 x 2.28 x 0.53 in., series has 430 kHz switching frequency and is isolated input to output at 1544 Vdc. Remote...
Read More »DC/DC Converters offer low output noise to 5 mVpp.
Isolated, 15 W, DC/DC converters, offered in single- and dual-output models, incorporate 250 mV dropout linear regulators and control circuit that maintains min constant dropout voltage over line and load temperature and output adjust range. With efficiencies to 88%, units include 6-sided shielding, soft start, adjustable outputs, and short circuit and thermal protection. Also offered: 750...
Read More »DC/DC Converters deliver VRM9.1 compliant CPU power management.
Models NXI100 and NXI150 non-isolated, point-of-load DC/DC converters power Intel's Xeon(TM) and Pentium 4 processors. They deliver up to 75 A continuous, 81 A peak at user-programmable voltage from 1.10-1.85 V using standard 5-bit VID codes. Both operate from nominal 12 V input. Multi-phase synchronous rectification techniques with interleaving achieve switching frequency of 1MHz. Converters...
Read More »DC/DC Converters utilize multilayer/PCB planar magnetics.
Series FH offers up to 50 W of output power at currents to 25 A. Input ranges are 18-36, 36-75, and 18-75 Vdc. Units include input under-voltage lockout, output OVP, and over-temperature protection. Input-to-output isolation is 1500 V. Hiccup-mode output overload protection supports continuous overload conditions. Converters provide line/load regulation to Ã-
Read More »Things to Consider Before Designing Custom Packaging
This e-Book provides pre-design process considerations for custom corrugated packaging.
Read More »PC/104 Isolated Power Supply has over current protection.
Model 207 converts input voltages of 9-36 Vdc to output voltages +5 Vdc at 2 A max rating and Ã-
Read More »DC/DC Converters operate without heatsink.
Typhoon(TM) open-frame, single-board converters use synchronous rectification, and employ surface-mount components and planar, in-the-board transformer structures to limit height to 0.3 in. Single-output, 1/8 brick model offers 1.8 V output and delivers up to 40 A with 89% efficiency at full load. Dual-output, Ã-¼ brick models offer 3.3/1.2 V or 3.3/1.8 V independently regulated output...
Read More »DC/DC Converters offer heat sink option.
Series HS 75 W PowerWatt Converters achieve efficiency up to 93% and power density of 98 W/inÃ-³. Interfacing and potting materials minimize thermal resistance from multilayer PCB to anodized aluminum heat sink. Converters feature 100 Ã-µS transient response time, 500 Ã-µA off-state current, output synchronous rectification, 2:1 input voltage range, input-to-output isolation, soft...
Read More »Span Power DC/DC Converters suit ETSI/HDSL applications.
Isolated CPK-0102 converters offer input range of 36-72 Vdc. With dual 118 Vdc independent outputs, products provide precision output current limiting on each output to 60 mA; outputs may be paralleled for current sharing. Open frame construction requires no external cooling or heat sink for operation over ambient temperature range of -25 to +71Ã-
Read More »DC/DC Converters enable smaller portable electronics designs.
FunctionPAK(TM) synchronous dc-to-dc boost converters provide high power density of more than 380 W/in.Ã-³ in 0.58 x 0.48 in. footprint. Models FX5545G006 and FX5545G106 convert input voltages from 2.5-6 V to low-ripple output voltages from 3.3-6 V. Output power and max current are 7.5 W and 1.5 A for FX5545G006 and 10 W and 2 A for FX5545G106. Units stabilize rechargeable battery outputs,...
Read More »DC/DC Converter provides 25-µs transient response.
PowerWatt 40 W converter features industry-standard pinout in 1/8 brick package. SMD and planar magnetics allow 60 W/cu in. power density. Unit provides 91% efficiency, and includes thermal and undervoltage protection, output synchronous rectification, 2:1 input voltage range, input-to-output isolation, soft start, external synchronization, and short circuit protection. It is suitable for...
Read More »Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.
Read More »