DC/DC converter needs no heat sink.
Quarter-brick sized DualQor(TM) is capable of delivering up to 40 W of total output power at 3.3V and 2.5V. It employs synchronous rectification to achieve efficiencies up to 87%. Converter has 48V nominal input and meets input voltage transient requirements up to 100V for l00 msec. Unit has industry-standard footprint of 1.45 x 2.3 in. with profile of 0.43 in., and industry recognized pin out...
Read More »DC/DC Converters feature isolated output.
5E Series offers input voltage ranges of 9-18, 18-36, and 36-72 Vdc. Units are available with single, dual, and triple low rippled regulated outputs. CMOS/TTL compatible remote On/Off control allows converter output to be turned on or off as necessary. 25/30 watt converters feature continuous short circuit protection and do not require heat sink. They have 6-sided shielding and can achieve...
Read More »DC/DC Converters accept wide range of dc inputs.
WD Series 10W dual output dc/dc converters have 4:1 dc input range to accommodate 12 V battery, 24Vdc industrial, and 48V telecom power sources. 3 models have input range from 9-36 Vdc, and 3 models have 18-72 Vdc input range. Outputs are Ã-
Read More »DC/DC Converter works in low power applications.
QML series isolated dc/dc converter can deliver up to 15 A total output current at 3.3V and below and up to 75W at 5V and above without need for attached heatsink. It uses synchronous rectification, resulting in no derating of output power up to 70 degrees C. Converter employs industry standard quarter-brick footprint and pin out, measures 1.45 x 2.3 in., and has low profile of 8.5mm. Functions...
Read More »Key Considerations for Basic Die Cutting: Tooling, Costs, Material Behaviors, and Tolerances
Key considerations to keep in mind when evaluating die cutting as your process of choice for part production.
Read More »DC-to-DC Conversion Board suits PC/104-based computers.
Power Vx 90-watt power conversion board is designed with intelligent power management features. It offers greater than 90% efficiency, input voltage range of 9-60 V, 12-bit external input voltage monitoring, local temperature monitoring and reverse polarity protection on input. Manufactured in compliance with PC/104 form factor requirements, Power Vx supports +/-5 Vdc and +/-12 Vdc, and is...
Read More »DC/DC Converters contain internal PI filters.
ASD15H series open frame, isolated, 15W DC/DC converters are fully approved for EN60950 and UL1950 SELV safety standards. Series consists of 21 models with 4:1 Input Ranges of 9-36 and 18-75 VDC and single and dual outputs from 3.3 to 15 VDC. ASD15H converters have integral finned heat sink that permits operation in temperatures from -25Ã-
Read More »DC-DC Converters offer wide temperature operation.
Single-output, surface-mount NTE Converters are 1W devices that operate across industrial temperature range (-40 to 85Ã-
Read More »DC/DC Converters deliver output currents of 80 A.
Half-brick DC/DC converters are available in two versions: ALH80 open face and AEH80 with heat sink adapter plate attached. Both offer efficiencies of 87% while delivering 80A, and 88.5% at 60A. Input range is 36 to 75V, and output voltages are 1.2, 1.5, and 1.8 volts. Units feature Ã-
Read More »DC/DC Converter features dual outputs of 3.3 and 5 volts.
VSX60 60W converter includes power trading facility that enables full 60W to be provided from either output. Unit is available in 2 versions with input voltage ranges of 18-36V or 36-75V. Input-to-output isolation is specified as 1500 VDC. VSX60 features input filtering, remote on/off with positive or negative logic, and non-latching protection against undervoltage, overvoltage, short-circuit,...
Read More »DC-DC Converters provide extended temperature operation.
IC-Style DC-DC Converters are 3.3 V-input surface mount devices with footprints of 1.64 cm2 and dual isolated outputs of either 12 or 15 V. They are fully compliant with CECCO0802 standard for reflow soldering at 280Ã-
Read More »Dies & Stamping Services with Over 25 Years of Experience
PDS is an established leader in progressive die stamping, with a reputation for providing precision and value that dates back more than half a century. Through extensive capabilities and a staff of seasoned professionals, we set the standard for quality, delivering flexible services that can meet the needs of the most challenging requirements. See our video to learn more.
Read More »