New Controls & Controllers Products

AC Servo Drive/Motor suits small machine tool applications.

ECODRIVE Cs series system-compatible AC servo drive is offered in 100-750 W power range with 230 Vac, 1- or 3-phase power input. Unit measures 2.17 x 7.17 x 6.69 in. (W x H x D). Motor includes options for built-in holding brake, keyed output shaft, and absolute feedback. Available with various open bus interfaces, ECODRIVE Cs incorporates firmware that embodies process-oriented technologies...

Machine Control handles single- and multi-axis applications.

With modular system concept, open control structure, and internationally standardized interfaces, VisualMotion provides solutions for automation architectures. Intelligent drive system and servo drives allow product and process changes to be made electronically. Modular Windows-based control software synchronizes up to 32 servo axes, communicating via SERCOS, Ethernet TCP/IP, PROFIBUS-DP,...

Linear Module is certified for Class 10 cleanroom use.

Type PSK linear module, suitable for semiconductor and life science industries, uses sealing strip to prevent contamination in sensitive environments. Extruded steel base with integral ball rail guide way enables PSK Precision Modules to achieve positioning repeatability of 0.005 mm with payloads up to 44,760 N at speeds up to 1.6 m/sec. Interchangeable with other modules, PSK can be used to...

Single Phase Voltage Regulator is pad mounted.

Voltage regulator has microprocessor-based control panel and temperature range of -40 to +85Ã-

A Guide to Robotic Cells in Automation: Electronics & Auto Parts

This white paper provides an overview into robotic cells in automation electronics and auto parts.

Power controllers reduce panel space.

DIN-A-MITEÃ-® compact power controllers provide SCR control, heatsink, wiring, and touch-safe exterior. Controllers offer switching capabilities from 16-100 A and voltages from 24-600 V in 4 packages. Units feature DIN rail or sub-panel mounting, MDR replacement screen to eliminate mercury problems, and tighter-fitting cover on integrated ground-leg wire packages to ease wiring. All 4 models...

Operator Interface/HMI offers data acquisition and display.

Model OP7200 eDisplay is a C-programmable operator interface/HMI with built-in Ethernet connectivity. Unit's 10Base-T Ethernet facilitates remote diagnostics, control, and communication, including sending and receiving E-mails and alerts. Two models incorporate 24-27 digital I/O plus I/O expansion port, 4 serial ports, Rabbit 2000 microprocessor at 22.1 MHz, 256K Flash, and 128K SRAM. Digital I/O...

Wireless Ethernet Bridges operate in 5.8 GHz band.

Models SEM5811 and SEM5811X interconnect Ethernet-based devices in factory floor/industrial applications. They operate in unlicensed 5.8 GHz band to avoid interference issues in 2.4 GHz or 900 MHz band. SEM5811 units offer over-the-air data rate of up to 1.23 Mbps. SEMs operate in point-to-point and point-to-multipoint configurations and utilize frequency hopping spread spectrum (FHSS) technology...

Voltage Regulator has round-tank functionality.

Pad-mounted, Single-phase, 32-step, voltage regulator allows system planners to regulate voltage on new and existing underground systems. Unit is available for system voltages from 2400 V, 3-wire to 24940 V, 4-wire. With current ratings from 50 to 548 A, regulator incorporates either 200 or 600 A deadfront termination system. Features include CL-5 control, automatic pressure-relief device, and 3...

MIL-STD-1553 Terminal is offered in various configurations.

Mini-ACE Mark3, 3.3 V, fully integrated, MIL-STD-1553 BC/RT/MT terminal uses 0.77 in.Ã-² board space and measures 0.13 in. high. It is offered with RT-only or BC/RT/MT functionality, 4K x 16 or 64K x 17-memory compliment, and either PCI or generic processor backend interface. Mini-ACE Mark3 works with 8, 16, or 32-bit processors with little or no glue logic while PCI Mini-ACE Mark3 series...

I/O Modules can be configured as Modbus or ASCII slaves.

I/O Pak(TM) K-Series Modules are 1,000 Hz, 19-bit analog measurement devices. Three types are offered with 1 to 32 channel configurations. All models operate on 10 to 30 Vdc and transmit information over RS-485 interface. I/O configuration files may be stored (on PC), retrieved and downloaded. Linearized, scaled, and formatted data is transmitted to host or network master using standard...

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.