PC390LCi-11 Hydraulic Excavator comes with minimum distance control feature.

PC390LCi-11 Hydraulic Excavator comes with minimum distance control feature.

PC390LCi-11 Hydraulic Excavator PC390LCi-11 Hydraulic Excavator is equipped with 257 HP SAA6D114E-6 EPA certified engine. Unit comes with intelligent machine control joysticks, auto grade assist, auto stop control, face angle compass and a 3D display. This excavator features stroke sensing hydraulic cylinders, an IMU sensor, and GNSS antennas. Unit’s auto-stop control function minimizes design...

Read More »
Amphenol RF's Type-N Connector is optimized for LMR® 400 cable.

Amphenol RF's Type-N Connector is optimized for LMR® 400 cable.

Type-N connector from Amphenol RF is a 50 ohm connector that operates at a frequency of DC to 6 GHz. Tool-free installation reduces termination time, eliminates hazardous fumes and safety concerns, and saves time and expense. An IP-67 rated sealed solution, the connector allows maintain high performance in harsh conditions and temporary submergence. Applications include antennas, base stations,...

Read More »
St

St

The company’s innovative MULTILAM technology allows for connector solutions designed to perform in the most severe conditions for up to 1 million mating cycles WINDSOR, Calif. (February 26, 2018) – Stäubli Electrical Connectors, Inc. (formerly Multi-Contact USA) will showcase its safe and highly reliable solutions for power transmission, test and measurement, transportation and a variety of...

Read More »
MEM2075 MicroSD Connector is light, slim, compact, and coplanar.

MEM2075 MicroSD Connector is light, slim, compact, and coplanar.

MEM2075 is a compact MicroSD with a height of 1.4 mm and length of 17.25 mm. With co-planarity of 0.08 mm, the connector operates at temperatures between -25°C to +85°C and has been tested to 5000 mating cycles. Models are made of stainless steel cover, have a latch with STM contacts, and can include optional PCB locating pegs. Applications range from portable electronics to wearable tech.

Read More »
End Launch Connectors from Pasternack can provide low VSWR of 1.10:1.

End Launch Connectors from Pasternack can provide low VSWR of 1.10:1.

High-speed, millimeter-wave, removable end launch connectors are compact and reusable. Models have maximum operating frequency of 40 to 110 GHz, and come with a 0.350-inch mounting width. They have a gold-plated beryllium copper center contact and stainless steel outer conductor. Available in four options, 1.0mm end launch (110 GHz), 1.85mm end launch (67 GHz), 2.92mm end launch (40 GHz) and...

Read More »
PC238USLC-11 Hydraulic Excavator comes with EPA Tier 4 Final certified engine.

PC238USLC-11 Hydraulic Excavator comes with EPA Tier 4 Final certified engine.

PC238USLC-11 Hydraulic Excavator is comes with Komatsu Diesel Particulate Filter, Selective Catalyst Reduction system with Diesel Exhaust Fluid injection. Unit is offered with KomVision system that combines input from three cameras into a surround-view image of machine. Excavator offers six working modes such as P, E, L, B, Att-P, Att-E. Unit is equipped with LCD color monitor panel, temperature...

Read More »
Heilind Electronics Now Stocking HARTING DIN 41 612 Industrial Connectors

Heilind Electronics Now Stocking HARTING DIN 41 612 Industrial Connectors

WILMINGTON, Mass. (PRWEB) January 24, 2018 Heilind Electronics, a leading global distributor of electronic components and authorized distributor for HARTING, has expanded its selection of industrial interconnects with the company’s DIN 41 612 connectors and accessories -- the widest range available on the market today. Because of their flexibility, HARTING DIN 41 612 connectors have become...

Read More »
University of Miami Wins 2018 Engineering Excellence Award for Its Innovation Bridge Project from the Florida Institute of Consulting Engineers (FICE)

University of Miami Wins 2018 Engineering Excellence Award for Its Innovation Bridge Project from the Florida Institute of Consulting Engineers (FICE)

The Innovation Bridge was Built Without Any Black Steel Reinforcement Using Basalt America's RockRebar® Corrosion Free Concrete Reinforcement OAKLAND PARK, FL - December 20, 2017 - Basalt America, a wholly-owned subsidiary of PayMeOn, Inc. ( Company ) (OTC PINK: PAYM), is pleased to congratulate the University of Miami's Civil, Architecture, and Environmental Engineering Department on its Grand...

Read More »
Walker Zanger's New Bera & Beren Tile Recreates Carved Limestone Aesthetic

Walker Zanger's New Bera & Beren Tile Recreates Carved Limestone Aesthetic

Collection includes coordinated wall and floor tiles, offering a complete design solution LOS ANGELES - JANUARY 16, 2018 - Walker Zanger, the world’s most comprehensive stone and tile company, recreates the look and feel of carved limestone through its new Bera & Beren collection of porcelain floor and ceramic wall tiles. With wallcovering and flooring options, designers are able to perfectly...

Read More »
GENE-SKU6 W1 3.5 in. Subcompact Board features DC input range of 9-36V.

GENE-SKU6 W1 3.5 in. Subcompact Board features DC input range of 9-36V.

GENE-SKU6 W1 3.5 in. Subcompact Board can be operated in temperature conditions which are cold as -20 °C and as hot as 70 °C. Unit is equipped with heat sink and comes with graphic packages which support 4K resolution and independent DP, DVI, and LVDS display outputs. Product is incorporated with Mini-card and mSATA slots, four USB 3.0 and two USB 2.0 ports and four COM ports. This board is...

Read More »
Precision Machined Parts for High Tech Applications
Sponsored

Precision Machined Parts for High Tech Applications

For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.

Read More »

All Topics