New Connectors Products

Aluminum Connectors suit freestanding wall applications.

Aluminum Connectors, used on CornerForms(TM) panel connector system, feature formed channels that nest metal standards. They include Corner Posts and Three Way Posts that accept 3/4 in. predrilled countersunk holes. Connectors come in 96 in. lengths. Additional aluminum profiles include tubes, bullnose profiles, channel moldings, poster frame and display stand components, and 90 and 180 deg posts.

Connectors work in temperatures from -40 to 185 deg F.

Hot Melt ST, SC, and FC fiber optic connectors are approved for indoor and outdoor use as single-mode and multimode connectors. They meet EIA/TIA 568B standards for outdoor applications, and incorporate reheatable adhesive technology and physical contact, pre-radiused zirconia ceramic ferrule technology. Insertion loss values are less than 0.2 dB. Single-mode and multimode units are tested to...

Snap-On Connectors rated for 500 Vrms, -65 to +165 deg C.

Mini-SMB 75 ohm connectors deliver dc to 4 GHz speed for broadband wireless applications. Connectors comply with MIL-STD 348 and meet Mil-c39012 requirements. Series includes straight RSB-200-1-17 and right angle RSB-21-0-1-179, crimp plugs for RG-179/U cable, vertical and right angle PCB plugs and jacks, and straight RSB-220-1-179 and bulkhead RSB-221-1-179 crimp jacks for RG-179-U cable. All...

Connector carries 1.5 amperes for wire harnessing.

Mini MiII(TM) 1.25 mm pitch connector system is available in wire-to-board and wire-to-wire configurations in 2 to 20 circuits for single row and 10 to 40 circuits for dual row. Single row IDT receptacle has guide slots to facilitate wire placement. Side ribs provide polarization and lock into clip for dual-row configurations. Header options include single or dual row, SMT or through-hole, and...

An Operations Manager's Guide To The Mobile Connected Factory of Tomorrow

This white paper provides an overview of mobile technology for managing your manufacturing facility, while also discussing the advantages of being an early adopter.

Instrumentation Fittings handle high pressures.

MPI(TM) connectors operate at pressures of 6,000 to 15,000 psi, making them suitable for equipment used to operate feed lines, processing lines, and other systems within industrial labs. Four-part fittings can be used on 316 stainless-steel, cold-drawn, 1/8 hard, unannealed tubing or thick-walled, annealed, instrumentation-grade 316 tubing, and are available for tubing ranging from 1/4 to 1 in....

Wire-to-Wire Connectors suit underwater applications.

JWPF Series connectors are designed for moisture and submersion applications. Housing lances allow confirmation of contact lock-in for secure insertion. Plug-to-receptacle interlock housing prevents accidental disconnection. Connectors are offered with 2 to 4 circuits on 2.0 mm pitch, and contacts are rated at 3.0 Amps, 100 V ac/dc. Temperature range is -25 to +85Ã-

Test Assemblies range from DC to 65 GHz.

PHASEFLEXÃ-® Assemblies are crush-, torque-, kink-, and fluid-resistant. They are also dust- and dirt-proof with ergonomic/ruggedized boot strain reliefs. Standard connectors include SMA, TNC/PTNC, Type N/Precision N, 7 mm, 7-16, 3.5 mm, 2.92 mm (K style), 2.4 mm, 1.85 mm (V style). Assemblies are suitable for production testing, antenna range testing, thermal vacuum chambers, and remote...

Connectors eliminate need for rigid line.

EIA connectors, suitable for flexible braided cable, simplify routing. Available as straight and right angle plugs, receptacles, and adapters in 7/8 and 1 5/8 in. line sizes, they suit high power applications up to 10,000 W. Construction features silver-plated beryllium-copper inner conductors; TeflonÃ-® dielectrics; and brass and nickel or silver-plated bodies. They provide 50 ohm impedance...

IDE/Compact Flash Adapter allows through-panel mounting.

CFADPT-HD IDE to dual compact flash adapter allows connecting 2 compact flash cards to any system having IDE port. Designed for embedded systems, it has both 40 pin .1 in. and 44 pin 2 mm IDE connectors. Both hard disk style and floppy style power connectors are available for supplying power to CFADPT-HD when 40 pin IDE cables are used. Power is provided by IDE cable when 44 pin cable is used.

Ganged Outlet distributes computer system power.

Quadbloc+2 Type 4758 has 4 ganged IEC F outlets and frame, into which company's Type KEB1 switch/inlet, Type 6200 fused inlet, or Type 6220 double fused inlet can be snapped. Busbar of Quadbloc+2 is available with 6.3 mm quick-connect tabs, solder tabs, or combination thereof. Rear is housed in black plastic cover that protects from accidental contact. For mounting, entire unit snaps into panel...

Let Our Safety Experts Lower Your Risk

Elite Technical Services provides your company with qualified and experienced safety experts. Specializing in confined space and high-angle technical rescue and jobsite hazard assessment, your workplace safety is the top priority. Check out the video to learn more.