New Connectors Products

Connectors fit semi-rigid and flexible cables.

TRU BMA connectors fit cables with tape-wrapped TeflonÃ-® and foamed polyethylene dielectrics. Push-on SMA interface is suitable for dense modular connector arrays. BMA connectors fit semi-rigid cable sizes from .0865 to .141 in. and flexible cables from .190 to .24 in. with crimp and solder attachment. Providing positive alignment interface with minimal insertion force, TRU BMA Series...

Connector suits board-to-panel feed-through applications.

Model RFS-2030 is constructed of nickel plated machined brass with Teflon insulation and silver plated phosphor bronze contact. Bulkhead seal is inset GR70 nitrile O-ring. Connector is mounted using 4 posts with standoffs spaced .400 in. on center. Featuring voltage rating of 1,500 V peak and insulation resistance of 5 K milliohms max, RFS-2030 is designed for applications with frequency range of...

Backplane provides differential pair architecture.

VHDM-HSD(TM) 5-row backplane supplies up to 5.0 Gbps bandwidth per signal pair. Ground planes between signal columns provide tightly controlled impedance for rise times down to 50 psec, ensuring low cross talk between signals within and between columns. It connects main backplane to accessory daughtercards in high speed, short rise time, high circuit count environments such as routers, switches,...

Connector accommodates high-volume manufacturing.

HTS HD Series modular connector system is comprised of rectangular outer shell made from die cast zinc or aluminum, inner contact housing, and Multimate contacts, which employ pin and socket design that is either stamped and formed or screw-machined. Contacts accept 30 to 14 AWG stranded wire. Connector accommodates 7 to 128 contacts and is rated for 250 Vac at 10 A per contact. Applications...

An Operations Manager's Guide To The Mobile Connected Factory of Tomorrow

This white paper provides an overview of mobile technology for managing your manufacturing facility, while also discussing the advantages of being an early adopter.

Connector suits audio and video multimedia applications.

Combination Connector consists of 3 RCA phono jacks in red, white, and yellow color combination and 1 S-video connector in black. Main housing and colored washers are made from ABS thermoplastic, and contacts are made from brass and steel. Connector is available in PCB mount, and in vertical and horizontal configurations.

Keyless Shaft Connections lock parts in position.

ETP shaft connections slide onto shaft and provide solid keyless connection between shaft and hub to position and lock pulleys, sprockets, and gears. They eliminate need for keyways, tapers, and tapped holes, which can cause component stress and wear. Connections have double walled steel sleeve filled with pressure medium that expands when compressed by screw tightening mechanism. They are...

RAST Connector suits appliance/white goods applications.

Double IDC (insulation displacement contact) ECO-DOMO double termination connector enables termination of two conductors at one connection point. Its 5 mm spacing may be used for double- or single-wire connections. Rated 10 A, 250 V for wire sizes 18 to 20 AWG, it enables the joining of several components over one connection point. Double flat spring contacts offer clean IDC connections that...

Fixed Terminal Block provides top-mount access.

Suitable for power supply connections, 8486 Top Series is designed in 2-, 3-, and 4-pole versions with 7.62 mm pitch spacing. Top-mount wire entry permits wiring the block where access is limited. It provides screwdriver and wiring access on same plane to maximize PC board space. Series is UL rated for 300 V, 30 A for stranded and solid wire, sizes 22 to 10 AWG (VDE rated for 36 A). Each block is...

Multipole Connectors resist electromagnetic interference.

Revos Series connectors have shielded housings, hoods, materials, and cable glands that provide protection against electric, magnetic, and electromagnetic fields, and meet EMC standards for resistance to EMI. Zinc-plated steel locking levers ensure secure fit between hoods and housings. Die-cast aluminum alloy housings with silver-plated conductive surface channel EMI away from connection points....

Stereo Jacks come in two and three positions.

Models CTP-JD-3502 and CTP-JT-3503 are 2- and 3-high 3.5 mm stereo jacks, respectively. They have PC99 colors for proper identification for PC industry. RFI/EMI shield helps protect interference from transmitting from unit to outside world. It also protects system from picking up interference on cables. Plastic is UL 94-V0 for safety, and contacts are gold plated for low resistance to plug. Jacks...

Von Ruden's Driven Tools Are Built to Last

Von Ruden's driven tools are designed to each specific machine in order to maximize performance. All of our tools are performance tested and made in the USA per ISO 9001:2015 standards. Check out our video to learn more.