New Connectors Products

Connector provides Z-axis, board-to-board solution.

SliderZ(TM) features .050 in. pitch and slide mating action, allowing user to mate or remove one pcb in Z-axis while leaving other pcb undisturbed. Featuring glass-filled polyester housing, connector is UL 94V-0 approved with operating temperature of -40 to 85Ã-

Tiny Connectors stack small form factor boards

Micro pitch pin and socket connectors work in micro/miniature applications. Square terminals mate with dual beam Tiger Claw or single beam Tiger Beam contacts. The 0.0315 in. system includes FTE Series headers and AW Series stackers which provide board spacings from 0.0197 to 0.355 in. when mated with CLE Series sockets. The 0.0394 pitch system has FTM Series headers and MW Series stackers with...

DC Electrical Receptacles install quickly.

Weather-resistant plugs and receptacles for vehicles have Slide-Lok(TM) locking ring for easy installation. Installer slides keyed ring past most of receptacle threads, until ring is flush against panel. Quarter turn engages ring onto threads. Models include: 12VRCTT Thin Terminal receptacle with 2 different-sized NEMA connection tabs to prevent misconnection; 2VPG2A 12 V plug fused at 2 A; and...

SMB Connectors provide low mating and un-mating force.

SMB Series 75-Ohm Connectors include plugs, right-angle plugs, and PCB jacks for frequencies up to 4 GHz. RSB-301-179, positive-locking plug uses spring-loaded collar that must be retracted before connector will un-mate. RSB-300-1-179 straight and RSB-310-1-179 right angle crimp plugs feature standard snap-on coupling with gold plated contacts and body. RSB-350-1, vertical, and RSB-355-1, right...

Tips for Managing Dangerous Dust in Manufacturing Facilities

This eBook covers important considerations when creating a dust management plan for your facility. For more information, download now.

TNC Connectors meet FCC Part 15.

Crimp connectors satisfy requirements of FCC part 15 by reversing contacts within standard connector body. RP-1216-I connector has TNC male pin and interface dielectric in TNC female body, and RP-1202-I has TNC female contact and dielectric in TNC male body. Both RP-1216-I and the RP-1202-I crimp connectors are for use with 2TV-400, LMR-400-UF, WBC-400 and Belden 9913 coaxial cables. They are...

Board Mount Plug withstands reflow soldering temperatures.

ELFB SMT compatible board-mount inverted header has European style 0.200 in. spacing, board-mounted solder pin headers, plug-like nose, and twin-beam plug contacts. Headers are available in vertical and horizontal styles, and with 2 through 20 positions. Individual headers can be dovetailed together to form longer assembly. Molded with high temperature glass filled polyamide, it is capable of...

Power Jack comes with indicator light.

Through-hole, right angle dc jack has LED for applications where it is necessary to show that power is being supplied to device. Jack is UL94V-0 rated, made of black PBT thermoplastic, and rated to 2.5 A at 24 Vdc. Connector is 12.70 mm in height and available with 1.3 mm center pin. LED can be custom made to show either one or 2 colors. Applications include portable devices such as laptop...

Crimped Connector suits rotary switch applications.

TL4 Series four-position connector utilizes 11.4 mm contact spacing and pluggable crimp contacts designed to reduce human error during wiring. TL4 Series connector is manufactured of flame resistant PBT material rated to UL 94 V-0 flammability standards and is rated for 10A applications. It is designed for ovens, ranges, and stove production.

Plugs and Outlets have durable black nylon housing.

BL Series are suitable for OEM applications requiring low-profile devices. Series include 2014CBL 20 A 125/250 V 4-wire connector, 2014PBL plug, 3014CBL 30 A 125/250 V 4-wire connector, 3014PBL plug, and 3014FIBL flanged inlet. All accommodate wide range of cord shapes and sizes, from 10-3SO to 14-ga TeflonÃ-®. Options include 15 A and 20 A straight blade, 15 A locking, and 20 A and 30 A NEMA...

Tube Connectors suit high-flow applications.

Barbed tube-to-tube connectors are designed for use with 3/8 and 1/2 in. ID flexible tubing. Tee, Elbow, and Straight Through configurations are available. Components are molded in lot traceable, virgin, medical-grade polycarbonate and have no parting line on critical sealing surfaces.