New Connectors Products

Connectors protect process network from short circuits.

FieldLinkÃ-® Switched Drop Connectors rely on solid-state protection circuitry, which reacts to short-circuit faults to keep remaining bus segment unaffected. Switchable junction terminals interconnect bus drops/spurs to main bus trunk line. Connectors are offered in Class I, Div 1 & 2 versions; NEMA 4, 4X, and 6; and in single and multiple drops for AS-Interface and Foundation Fieldbus...

Connectors/Cable Assemblies suit telecommunications hardware.

RFH Series Connectors are low profile MHF coaxial connectors with mounting area of 3 mm x 3 mm on PCB and 2 mm height when mated. Cable assemblies test frequency rating VSWR of 1.3 max up to 6 GHz. MHF connectors have nominal impedance of 50 ohms with dielectric withstanding voltage of 150 Vac rms and temperature range of -40 to +90Ã-

Rectangular Connectors fit CONTACT-® EPIC-® housings.

UL, CSA, and VDE approved, EPICÃ-® HEE Series high density connectors have 16 A, 600 V rating. Family consists of 6 contact capacity configurations: 10, 18, 32, 46, 64 (2x32), and 92 (2x46). Crimp terminated inserts are available with silver or gold contacts. Connectors are suitable for robotic, transportation, automotive, and industrial applications.

Bus Bar Contact connects and disconnects quickly.

For use with PowerPoleÃ-® 180 and SBÃ-®175 housings, 180 A bus bar contact attaches directly to copper bus allowing quick connect/disconnect of cables. Quick disconnect minimizes system assembly, replacement, or repair time. Contacts are made from solid copper, are silver plated, and are threaded to provide simple attachment to bus without need for special tooling. Bus bar contacts...

A Guide to Custom Water Manifold Assemblies

This white paper provides a guide to custom water manifold assemblies.

Ethernet Connector provides power and data transmission.

Han-Brid connector packages standard RJ-45 plugs and jacks into variety of hoods and housings that offer protection from water, oil, dust, and dirt. Two integrated 10 A contacts supply power to network. Assembly is performed with standard tools making field installation possible. Connector is rated for Category 5 transmissions.

Snap-In AC Inlet is rated 20 A/250 V.

Model 4793 is offered in several versions to suit panel thicknesses from 1 to 3 mm, with 6.3 mm quick-fit terminals or solder tabs. Body is made from UL94-V0 thermoplastic, and contact pins and terminals are bright electro-tin plated brass for low resistance. Inlet is designed to comply with EN 60320-1/C20 for Class I cold condition. It is approved at cURus 250 V/20 A and VDE 250 V/16 A.

Kit contains 3.5 mm RF adapters.

RFA-4031-01 kit features 3 adapters, each with 50 ohm impedance. They are made of non-magnetic 303 stainless steel, with beryllium-copper contacts supported with bead configuration. Units operate up to 34 GHz. Female contacts feature 4-slot configuration, ensuring that pressure is distributed evenly during engagement of male pin. Coaxial connectors and adapters intermate with SMA and 2.9 mm...

Locking Devices secure flat cables.

Flat Cable Locking Plugs and Connectors allow flat cables to be terminated with conventional round cable devices. Devices have serrated terminal plates, contoured clamps, brass screws, ribbed positive grip housing surfaces, and Safety Grip(TM) external cord grip. Able to hold up to #10 gage flat cables, 20 and 30 A devices are available in 4-pole, 5-wire models and NEMA L2120 and L2130...

SMT Headers utilize capillary action for strong joints.

Custom-designed Surface Mountable Headers are available with pins missing at specified positions or with pins of different lengths. Capillary action of solder paste during reflow draws header down tightly to PCB, pulling it into proper position, and ensuring co-planarity. Header assembly is designed to move with PCB, reducing mismatch created by different coefficients of expansion of dissimilar...

Connectors fit screw type plugs and are weld friendly.

Sub D Type non-magnetic connectors are offered in 9-pin, 15-pin, 25-pin, and 50-pin versions. All have gold-plated stainless steel conductors, and are available as weldable or flanged units. Connectors are rated for temperatures between -269 and 460Ã-

Ensure Your Medical Device Meets Regulatory Standards with Triad's Custom Magnetics

Triad Magnetics' custom components for medical devices are designed and manufactured with the strictest regulatory standards in mind. Our capabilities include rapid design, prototyping, and testing of inductors, transformers, and power supplies for medical equipment. Check out our video to learn more.