New Connectors Products

Interconnect Products support IEEE(TM) 1394 technology.

With 9-pin interface, IEEE 1394b cables are capable of S3200 (3.2 Gbps digital data rate) over each of 2 differential channels. Interfaces provide minimum of 1,000 mating cycles and feature 3-stage sequential mating system. Sockets are double shielded for EMI protection and are available in pure SMT and SMT with through-hole outer shells. Designed with rugged leaf contacts, 1394b sockets offer...

Connector Kits suit both simplex and duplex applications.

Multimode LC Connector Plug Kits are available for 900 Ã-µm buffered cable and 1.6 to 2.0 mm, 2.4 mm, and 3.0 mm jacketed cable. Knurled crimp body enables cable retention, while wide thumb latch makes it easy to unplug. Design utilizes one connector body style for both simplex and duplex applications. Duplexing is accomplished via field installable clip, which allows polarization corrections.

Control Connectors offer illumination for visual monitoring.

Illuminated control connectors, available in Mini-Quick Straight and 90Ã-

High Speed Interconnects minimize crosstalk.

High Speed Interconnect line includes variety of micro pitch (0.5, 0.635, and 0.8 mm) units with controlled impedance for enhanced signal integrity. Q-Strip(TM) interconnects are rated up to 2.33 GHz while Q-Pairs(TM) interconnects are rated up to 10 GHz. Designs include right-angle and edge-mount for perpendicular and horizontal board mating in single-ended and differential pairs configurations....

OPTICS IN THE SEMICONDUCTOR INDUSTRY

This white paper provides an in-depth overview into optics in the semiconductor industry.

Crimp Connector complies with FCC Part 15.

Model RP-4252-B reverse polarity bulkhead crimp connector, with SMB jack body and SMB plug contact, is IEEE 802.11b Wi-Fi(TM) Compatible. Because it will not mate with standard SMB plugs, it complies with FCC Part 15. Designed for use up to 4 GHz, connector features nickel-plated brass body, gold plated contact, nickel plated hex nut and lock washer, and TeflonÃ-® insulation. Connector can be...

I/O Connector System is suited for server industry.

LaneLink(TM) connectors support InfiniBand(TM) 4X and 12X link technology. Cable-to-board I/O system is optimized for differential signaling at 2.5 Gbps per pair. Its pcb receptacle provides isolation of cable loads from SMT solder tails. Cable wire terminates directly to plug contacts, while wire guide and strain relief captures individual wires and attaches to ground contacts. Pinch-to-release...

Edge Connectors support PCI Express(TM) technology.

Edge card connector line includes series of four edge connectors, each with specific bandwidth capabilities. Connectors are suitable for use in computing and data communications applications including PCs, servers, and workstations.

Interconnects support notebook, server storage markets.

Serial ATA Interconnects feature differential pair signaling technology and can support 1.5 Gbps. Combined signal and power interface, with built-in hot-plug capability, is suitable for blind-mate applications. Units support 1.8, 2.5, and 3.5 in. form factors with both cabled and direct docking systems.

High Speed Interfaces offer guide post option.

Series QTE/QSE-GP .8 mm pitch interfaces use Guide Post to accurately align connector when mating. They are rated for use up to 2.33 GHz, depending on application and interface. Mounting configurations allow for traditional parallel board stacking, and perpendicular mating of boards such as in daughtercard applications and horizontal (coplanar) type applications. Interfaces are suitable for...

Four-Wire Connector and Plug have IP68 rating.

Model 4M20 Male Plug and 4F20 Female Connector provide complete protection against dust and allow for continuous submersion in up to 6 ft of water when capped or mated. Designed to eliminate GFI system problems, male plugs and female connectors are rated for 15 to 25 A at 600 V (max). Connectors are available molded to Type SOW-A Cable on No. 14 AWG rated 15 A, No. 12 AWG rated 20 A, and No. 10...

Custom Fabrication & Machining Services with Over 30 Years of Experience

As a trusted manufacturer to customers across a broad range of industries, Key Gas Components is a premier provider of CNC machining and tube fabrication. Our entire organization is quality driven and customer-centric, with broad-based manufacturing capabilities that can accommodate the most challenging requirements. See our video to learn more.