New Bits Products

Gundrill System drills deep holes with high precision.

Model 100CR utilizes counter-rotation of workpiece and cutting tool to attain accuracies up to .005 in. runout in 40 in. depth. Precise laser alignment enables unit to work within close tolerances. With effective drilling depths to 48 in., Product offers drilling ranges from .125-1.000 in. in diameter. System is equipped with programmable controls and coolant system with 5 micron filtration.

Drill Crown chamfers and drills in one operation.

M-geometry crown, for CrownLoc(TM) drill system, is optimized for hard-to-drill materials and incorporates chamfer module that utilizes 2 inserts, each with 2 cutting edges. Heat generation is minimized via small edge preparation. Sharp cutting edges and conical front rake clearance reduce workpiece work hardening, while cutting geometry reduces residual stress and minimizes burrs at hole exit....

Tool Bits perform specific welding end prep jobs.

Titanium nitride (TiN) coated Formed Tool Bits, for use with EscoLock(TM) wedge-lock blade locking system, bevel, face, and bore clad boiler tubes simultaneously without cutting oils. Suitable for Millhog end prep tools, bits work on tubes from Ã-½ in. ID to 18 in. OD and cut angles from 10Ã-

Drills feature TiAIN coating for improved wear resistance.

ADX TiAlN Coated Drills have convex cutting edges and volute point. They are available in jobber and intermediate lengths, and in solid and oilfeed versions. Each has stepped shank to DIN 6535, with or without whistle notch. Intermediate length allows for drilling up to 3.5X diameter depth in 1 pass, while jobber lengths achieve 5X diameter depth. Sizes range from 3.0 to 30.0 mm, with fractional...

A Kickstart Guide to Cyanoacrylates

This eBook provides a guide to Cyanoacrylate instant adhesives.

Carbide Drills handle high-silicon aluminum and difficult cuts.

Sculptured Edge (SE) 256 drills, with 2 margins per flute, are suitable for irregular exits, cross-holes, and interrupted cuts. Diameters range from .1563-.7580 in. and 5-16 mm in Grade KC7015. Type SE 731 and SE 732 drill and chamfer in one pass prior to tapping. They are offered in tap sizes from 8-32 to 7/8-14, in cutting depths of 3 and 4 times diameter, and apply 45Ã-

Carbide Drill holds tight tolerances for accurate holemaking.

CoroDrill R840 Delta C is offered in diameters from 0.118 to 0.787 in. for external cooling and 0.197 to 0.787 in. for internal cooling. Drill is designed with bronze-colored grade GC1220 carbide and is suitable for use with metals ranging from aluminum to super alloys. Fine-grained carbide grade features strong multi-layer PVD coating for wear resistance and maximum edge security.

Solid Carbide Drills avoid bending thin-wall alloy parts.

Sculptured Edge (SE) 284 and 285 drills have positive-rake chisel point for cutting high temperature alloys. Self-centering capability prevents chip from wandering or walking at beginning of cut. Drills are available in uncoated grade K715 to provide strength and resistance to built-up edge. Model SE 284 short length drills are available in sizes from .1563 to .7500 in. SE 285 regular length...

Drills handle most deep drilling challenges.

Cleveland Twist Drill Q-Cobalt screw machine length drills feature wide land parabolic flute shape, 135Ã-

Carbide Drills avoid bending thin-wall alloy parts.

Sculptured Edge (SE) 284 and SE 285 drills have positive-rake chisel point with large active cutting area that reduces stress and provides freer chip flow when machining high-temperature alloys. Cutting geometry reduces thrust by 20%. Short-length SE 284 models are offered in metric sizes from 4 to 25 mm and inch sizes from .1563 to .7500 in. SE 285 drills are regular length by DIN standards....

Drill provides directional stability.

KUB QuatronÃ-® delivers repeatable holes even in difficult drilling conditions, interrupted cuts, uneven castings, and hardened steels. It is offered in both inch and metric standards with drill depth of 2X diameter. Four-edge design allows variety of positions of square carbide inserts. Straight shanks come in .750, 1.000, and 1.250 in. dia and 20, 25, and 32 mm dia. Coolant holes follow...

Trotec Laser Offers Customizable Industrial Laser Marking Solutions for Any Application

Trotec's laser marking solutions provide your company with configurable workstations and intuitive, customizable software. Check out our video to learn more.