New Bits Products

Screwdriver Set includes variety of blades and bits.

Featuring fine-tooth, ratcheting screwdriver with anti-impact, soft-grip rubber handle, BRSDSET1 35-Piece Screwdriver Set includes 150 mm and 250 mm Ã-¼ in. hexagon drivers, Ã-¼ in. square drive screwdriver blade, and 290 mm Ã-¼ in. hexagon driver flexible screwdriver blade. It also has 30 interchangeable bits in slotted, PhillipsÃ-®, PozidrivÃ-®, TorxÃ-®, and Tamper Proof...

Precision Drills cut range of materials.

Available from 4-20 mm, Quadro 15 PLUS is suited for cutting stainless steel, steel, cast iron, and other non-ferrous materials. It can achieve hole quality of H7 and surface finish of Ra 0.8 Ã-µ. All sizes are coolant through and have Balzers coating. Available from 1-4 mm in increments of 0.1 mm, solid carbide Phoenix Drill features smooth Balzers coating and point and flute geometry....

Indexable Insert Drill suits short hole drilling.

Offering cutting force balance, CoroDrill 880 is available with cylindrical shank from 29.5-16.5 mm diameter with Coromant Capto coupling down to 20.00 mm diameter. For special needs, Tailor Made option is available on drills between 20.00-29.99 mm diameter.

Solid Carbide Drill cuts extra-hard materials.

Providing drill depth of 6 x diameter, Phoenix Drill features ultra-fine grain composition and is available from 1-4 mm in steps of 0.1 mm. Specially-designed flute and point geometry assure low cutting forces and chip control. Internal coolant for diameters starting at 2.5 mm makes drill suited for cutting hard and non-ferrous materials such as steel, stainless steel, and cast iron. Smooth...

5 Key Questions to Ask Your Valves & Fittings Manufacturer

This ebook discusses the five key questions you can ask to avoid common pain points and find a manufacturer who will provide the maximum value and service for your components.

Carbide Drill employs point geometry for optimal finish.

Featuring 15Ã-

Core Drills penetrate concrete, brick, and masonry block.

Handheld, single-speed Model CDM-1H is equipped with 11 A, 115 V motor and operates at 0-1,800 rpm. It excels in wet drilling applications up to 3 in. dia or can be used with Cobra dry drilling bits up to 5 in. dia. Unit includes adjustable shoulder rest, 3-position hand grip, and internal water feed. Suited for straight or angled holes, Model CDM-2CSA can be mounted by bolt or vacuum base, and...

Core Drill suits concrete and natural stone applications.

Wet Diamond Core Drill, Model END 1521 P, can drill 3/8-1Ã-¼ in. dia holes and features quick-change diamond bit system to facilitate core removal. Rotary action allows drilling without blow out and micro fractures. Hand-held drill, powered by 13.6 A, 6,000 rpm motor, operates without shock or vibration. Along with centering aid, drill comes with vacuum connection, Ã-½, 5/8, and Ã-¾...

Carbide Cutters are suited for holemaking applications.

Copperhead(TM) Annular Carbide Tip Cutters feature carbide tip cutting edges brazed onto steel body, providing optimal wear resistance and tool life in drilling applications involving high Brinnell hardness alloys or abrasive cast irons. Tools can be re-sharpened to further extend operational life and feature dual flat shank. Available sizes range from 9/16-1Ã-½ in. dia for holemaking to 2...

Drill/Tap Bits come in metric sizes.

Made from high-speed steel, Combination Drill/Tap Bits allow users to drill, tap, and countersink metric hole in one motion. Units tap up to 10-gauge metal and have hex shank to ensure strong connection to drill chuck. Back taper beyond tap helps prevent thread damage from over-drilling. Packaged individually or in kits, bits are suited for electrical, HVAC, plumbing, automotive, and DIY...

Auger Bits deliver smooth, clean holes.

Type I Spur and Type II Ship Auger Bits feature Power Band Tip, which keeps all drilling power focused to cutting edge. Ranging in size from Ã-¼-1Ã-½ in. dia with overall lengths of 7Ã-½, 13, and 17 in., Type I bits utilize cutting spur to cut clean holes in applications unlikely to encounter nails or staples. Type II units range from 3/8-1Ã-½ in. with overall lengths of 7Ã-½,...

DoorKing Releases Advanced Long Range Card Reader System with Frequency Hopping Technology

The DoorKing DKS AVI system is at the cutting edge of automotive security technology and represents a leap forward in engineering innovation. When it comes to long-range passive card readers, we lead the industry and set the standard for quality and performance. To find out why the DoorKing DKS AVI system is taking the automotive security industry by storm, see our video.