New Adhesives Products

Structural Adhesive is chemical and water resistant.

Type XD 4661-A/B methacrylate adhesive joins substrates such as thermoplastics, aluminum, thermoset composites, and ferrous metals. Product requires 1:1 pbv mix ratio, 3 min work life, and can be handled after 8 min at room temperature. Full cure cycle is 18 min at 77Ã-

Acrylic Adhesive bonds low energy plastics.

LoctiteÃ-® 3030, 2-component adhesive has 10:1 mix ratio and cures at room temperature to provide fixturing strength within 8-10 min. Once cured, product maintains strength under elevated temperature and humidity conditions. Formulated to bond substrates such as HDPE, LLDPE, polyethylene, and polypropylene, thixotropic material may also be used as general-purpose adhesive on other substrates....

Conductive Adhesive is offered in syringe system.

Able to cure at room temperature in 24 hr, CHO-BONDÃ-® 584-29 conductive adhesive is contained within syringe system that consists of a pair of syringes, 1 containing hardener and 1 with conductive resin, separated by connector. Compounds are mixed between syringes, and 1 syringe is used to apply mixed conductive adhesive. With silver filler, compound provides low-volume resistivity of 0.002...

Dielectric Adhesive suits stacked die applications.

Formulated with high thermal conductivity (0.8 W/mK) filler and collapsible spacers, QMI 9503 is hydrophobic and stable at temperatures to 260Ã-

Custom Progressive Metal Stamping for Manufacturing EMI Shielding

A Guide to Containing EM Radiation Through Custom Progressive Metal Stamping

Surface Mount Adhesive suits high-speed applications.

Without requiring higher than normal print temperatures or higher nozzle temperature control, ChipbonderÃ-® 3627 may be dispensed at rates of 40,000+ DPH and is fully jettable. Controlled rheology provides high-speed printing for use with fine pitch components. Stable at room temperatures, fully cured adhesive provides adhesion to various substrates and has glass transition temperature (Tg)...

Adhesive bonds plastic-to-plastic assemblies.

LITE-LOK 495, suited for structural bonding of plastics and sealing of plastic assemblies, offers chemical resistance to detergent, carpet, and floor cleaning solutions. Material is 100% solids, with no solvents or by-products upon curing. With viscosity of 35,000 cP, clear, light-yellow liquid cures under UV-A light and may be applied using pressure pot or piston pump dispensing system. Cured...

Aerosol Adhesive stabilizes materials for shipping.

Pallet-stabilizing Lock n'Pop is for low-volume use for materials in storage and securing airfreight shipments. Adhesive assures that packages won't slide, yet separates with no evidence of adhesive use. Designed for paper surfaces including white, printed, and non-printed corrugated boxes and multi-walled bags, adhesive is safe for indoor use. Aerosol is water-based and biodegradable, and is...

Flooring Adhesive prevents mildew and bacteria growth.

SI-UltraTac 200 antimicrobial acrylic flooring adhesive resists up to 5 Ã-½ lb of moisture emission without need for pH blocker/primer. One-part formulation prevents common bacteria, fungi, mold, and mildew microorganisms from growing under flooring. Adhesive can be used with vinyl sheet/tile and carpet.

Epoxy forms bonds for continuous use to 400-

Stress-free Duralco(TM) 125N forms flexible, electrically conductive bonds with moisture, chemical, and solvent resistance. Able to cure at room temperature, product exhibits flexural strength of 1,150 psi, 70 Shore D hardness, and compressive strength of 6,000 psi. With density of 2.7-3.0 gm/cc, epoxy requires no measuring and does not put forth any odor. Product bonds to glass, ceramics,...

Epoxy Adhesive maintains peel strength after heat aging.

Non-abrasive Solarite EA-0504 cures at room temperature and does not become brittle. It offers high-impact and vibration resistance and is suitable for use in automatic dispensing equipment. Epoxy provides adhesion to wood; metals, including aluminum, stainless steel, copper, and brass; and plastics, including ABS, polycarbonate, and fiberglass. It requires no special surface preparation, and...

Industry Leading OEM with over 65 Years of Experience

Blonder Tongue Laboratories provides ISO 9001:2015 certified electronic contract manufacturing services at our on-site lab. We specialize in video distribution, fiber optics, and communications but have a variety of services available to bring your products to market. See our video to learn more.