Adhesives

Epoxies

Formulated for potting, encapsulation, bonding and sealing applications, Master Bond EP17HT-100 is a single part epoxy system that is designed to cure in 60-90 minutes at 200-220°F. Cures can be accelerated at higher temperatures. This low heat curing schedule is useful in bonding applications involving temperature sensitive substrates in the aerospace, electronic, optical and other high-tech...

Read More »
Epoxies

Formulated for potting, encapsulation, bonding and sealing applications, Master Bond EP17HT-100 is a single part epoxy system that is designed to cure in 60-90 minutes at 200-220-°F. Cures can be accelerated at higher temperatures. This low heat curing schedule is useful in bonding applications involving temperature sensitive substrates in the aerospace, electronic, optical and other high-tech...

Read More »
Miscellaneous Controls

Adhesive and Dispenser are optimized for medical applications.

With elongations over 100% and fixture speeds under 10 sec, Henkel LOCTITE-® 4902 flexible cyanoacrylate adhesive is ISO 10993 Biocompatible and suited for plastic, rubber, and metal bonding applications in medical items. Digital dispenser and valve controller, Fisnar DC200, is designed for facilitated dispensing of viscous materials. Internal air solenoid suits applications requiring...

Read More »
Miscellaneous Controls

Adhesive and Dispenser are optimized for medical applications.

With elongations over 100% and fixture speeds under 10 sec, Henkel LOCTITEÂ-® 4902 flexible cyanoacrylate adhesive is ISO 10993 Biocompatible and suited for plastic, rubber, and metal bonding applications in medical items. Digital dispenser and valve controller, Fisnar DC200, is designed for facilitated dispensing of viscous materials. Internal air solenoid suits applications requiring...

Read More »
DriTac Announces: Easy Clean 4-In-1 Can Be Used Over Cutback Adhesive
Adhesives

DriTac Announces: Easy Clean 4-In-1 Can Be Used Over Cutback Adhesive

DriTac Flooring Products announces that DriTac 7700 Easy Clean 4-in-1 Premium Green" Sound Moisture Control MS Polymer Wood Flooring Adhesive can now be utilized to isolate old cutback adhesive residue for hardwood flooring installations. Specialized formula design enhancements now enable this multifunctional, eco-friendly wood flooring adhesive to consolidate subfloor preparation and allow for a...

Read More »
DriTac Announces: Easy Clean 4-In-1 Can Be Used Over Cutback Adhesive
Adhesives

DriTac Announces: Easy Clean 4-In-1 Can Be Used Over Cutback Adhesive

DriTac Flooring Products announces that DriTac 7700 Easy Clean 4-in-1 Premium Green" Sound Moisture Control MS Polymer Wood Flooring Adhesive can now be utilized to isolate old cutback adhesive residue for hardwood flooring installations. Specialized formula design enhancements now enable this multifunctional, eco-friendly wood flooring adhesive to consolidate subfloor preparation and allow for a...

Read More »
Ceramic Adhesive bonds thermocouples to high-temp heater.
Adhesives

Ceramic Adhesive bonds thermocouples to high-temp heater.

Ceramabond™ 571, a new high temperature magnesium oxide based ceramic adhesive manufactured by Aremco Products, Inc., is now used to bond thermocouples to high temperature molybdenum-rhenium heater tubes for applications to 3200o F (1760 ºC). Ceramabond™ 571 is a water-based, two-part, fast-set, magnesium oxide filled ceramic adhesive and coating used in the assembly of high temperature...

Read More »
Ceramic Adhesive bonds thermocouples to high-temp heater.
Adhesives

Ceramic Adhesive bonds thermocouples to high-temp heater.

Ceramabond™ 571, a new high temperature magnesium oxide based ceramic adhesive manufactured by Aremco Products, Inc., is now used to bond thermocouples to high temperature molybdenum-rhenium heater tubes for applications to 3200o F (1760 -ºC). Ceramabond™ 571 is a water-based, two-part, fast-set, magnesium oxide filled ceramic adhesive and coating used in the assembly of high temperature...

Read More »
UV-8509R - UV Curable Plastic Bonding Adhesive
Adhesives

UV-8509R - UV Curable Plastic Bonding Adhesive

UV-8509R is a non-sag, fast curing urethane acrylate that bonds well to engineered plastics and metal substrates. This product requires direct UV exposure during cure. Because of the variability of different UV light sources it is suggested that the user test and specify UV intensity and exposure time. This material is specially formulated to have reduces surface tack due to oxygen inhibition....

Read More »
UV-8509R - UV Curable Plastic Bonding Adhesive
Adhesives

UV-8509R - UV Curable Plastic Bonding Adhesive

UV-8509R is a non-sag, fast curing urethane acrylate that bonds well to engineered plastics and metal substrates. This product requires direct UV exposure during cure. Because of the variability of different UV light sources it is suggested that the user test and specify UV intensity and exposure time. This material is specially formulated to have reduces surface tack due to oxygen inhibition....

Read More »
Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life
Sponsored

Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life

For the ultimate in heat transfer fluid performance, Paratherm offers HR Heat Transfer Fluid that is engineered specifically for closed loop liquid phase heating. When it comes to characteristics such as thermal stability and fluid degradation, Paratherm HR leads the industry in value and performance. See our video to learn how Paratherm is raising the bar for heat transfer fluids.

Read More »

All Topics