Adhesives

Dymax SpeedMask® Masking Resins to be Showcased at MRO Americas
Masks and Masking

Dymax SpeedMask® Masking Resins to be Showcased at MRO Americas

Torrington, Connecticut – Dymax Corporation will showcase SpeedMask® line of masking resins in Booth #4211 at MRO Americas, scheduled to take place April 5-7, 2016 at the Kay Bailey Hutchison Convention Center in Dallas, Texas.Â-  SpeedMask products replace tapes, waxes, lacquers and fixtures while offering reliable protection against most metal-finishing process environments....

Read More »
Coatings

Toughened One Component Epoxy for Chip Coating Applications Meets NASA Low Outgassing Specifications

Formulated for many electronic applications, Master Bond Supreme 3HTND-2CCM is a multifunctional epoxy that is well suited for chip coating, glob top and die attach applications as well as for bonding, sealing and encapsulation. Since it is a one part system, it does not require mixing and has an “unlimited” working life at room temperature. This epoxy passes NASA low outgassing tests which...

Read More »
Conductive Adhesive has low-temperature cure capability.
Adhesives

Conductive Adhesive has low-temperature cure capability.

Designed for circuit assembly applications, EMS 618-116 cures in 30 min at 100°C or faster at elevated temperatures and forms high-strength, high-reliability conductive interconnects. This conductive adhesive, as low-temperature cure, single-part system, specifically suits static drain and EMI/RFI shielding applications.

Read More »
Miscellaneous Film

Fabrico Medical to Exhibit Advanced Medical Fabrication Capabilities at the 2016 MD&M West Show

Rochester, NY – Fabrico Medical, a provider of custom manufacturing services and converter of thin flexible materials for the design-to-manufacture of medical devices and disposables, announces its participation in the 2016 MD and M West Show, Booth #1642, February 9-11, 2016, at Anaheim Convention Center, Anaheim, CA.Â-  Fabrico Medical is also pleased announce that they will be...

Read More »
Membranes

Hard Flooring Membrane dampens impacts and noise.

Designed for use under thin-bed adhesives for ceramic tile, stone, and other hard surface installations,Â- FRACTURE BAN™ eliminates transmission of stresses from substrate while dampening transmission of impact (ANSI A118.12) and air-borne noise (ANSI A118.13) through floor to room below. This reinforced, pliable, peel-and-stick membrane, made from hot-applied polymer modified...

Read More »
Adhesives

Eastman - Lantor Live Demo Cooperation at JEC

Eastman Machine Company (Buffalo, NY) will participate together with Lantor (Veenendaal, Netherlands) in the Live Demo Zone at JEC World, Paris France from March 8-10 alongside regularly scheduled cutting demonstrations in Eastman stand B62. The cooperative presentation aims to educate visitors on methods to make composite lay-up cleaner, more ergonomic and demonstrate ways to reduce waste....

Read More »
Applicators

Ellsworth Adhesives to Display the Latest in Adhesive Technologies at Expo Manufactura

GERMANTOWN, WI – Ellsworth Adhesives, a global distributor of adhesives, specialty chemicals and dispensing equipment, is pleased to announce that they will be exhibiting at this year's Expo Manufactura™ conference and trade show at the Cintermex in Monterrey, Mexico, February 2 - 4, 2016. Ellsworth Adhesives is displaying the latest technology of adhesives and dispensing equipment for...

Read More »
Adhesives

All Appli-Tec Products Meet OSHA's GHS Labeling - SDS Guidelines

OSHA's updated Hazard Communication Standard (HCS) 29 CFR 1910.1200 requires chemical manufacturers, importers and distributors to label all containers of hazardous chemicals and to supply properly formatted Safety Data Sheets (SDS) – for the smallest of syringes to large drums. We're pleased to announce that Appli-Tec has been in compliance with the new Globally Harmonized System (GHS)...

Read More »
Adhesives

Cyanoacrylate (Instant) Adhesive targets automotive industry.

Formulated to dispense cleanly from automated valves, Aron Alpha 203TX-1Y luminescent-infused thixotropic gel cyanoacrylate bondsÂ- within 10 sec (neoprene to steel) and fluoresces bright neon green under black light. Latter allows vision system to detect and verify adhesive was applied to proper location on automotive part. Properties include viscosity of 1,500 cps, tensile strength...

Read More »
Marian Inc. to Exhibit at MD&M West
Adhesive Tapes

Marian Inc. to Exhibit at MD&M West

INDIANAPOLIS, IN This will be Marian’s second consecutive year exhibiting at MD and M West," says Bill Witchger, CEO of Marian. "We recognize our ability to connect with leading companies in the medical industry and strive to continue building on those relationships while creating new connections at MDM West 2016." Marian plans to showcase a variety of medical solutions that visitors can...

Read More »
Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring
Sponsored

Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring

Krueger Sentry Gauge, a leader in chemical sight gauges, now offers the ultimate in aggressive liquid storage monitoring devices. From sulfuric and hydrochloric acid to bleach, and acetone, our products are designed with robust features that deliver a long and trouble-free service life. See our video to learn all about this new and innovative line of sight gauges.

Read More »

All Topics