New Adhesives Products

Adhesive System provides thermal conductivity.

Silicone-based TRA-CAST 813J01 bonds well to difficult substrates, exhibits low stress, and can cure at room temperatures. Soft and flexible material has medium viscosity prior to cure. Once hardened, adhesive can handle temperatures up to 260Ã-

Thermally Conductive Adhesive features 1:1 mix ratio.

Two-component, electrically-isolating, EP21AO epoxy adhesive will adhere to similar and dissimilar substrates. Self-leveling paste is 100% reactive and does not contain solvents or volatiles. It has thermal conductivity of 10 BTU/in./ftÃ-²/hr/Ã-

Adhesive bonds thermocouples for high temperature uses.

Pyro-Putty-® 2400 thermally conductive adhesive, sealant, and metal repair compound is suited for applications up to 2,000-°F. Ceramic and stainless steel-filled paste bonds, seals, and repairs defects up to 3/8 in. cross-section in cast iron, steel, and stainless steel components. Single-part, thermally shock-resistant product is water-based and contains no VOCs. It sets at room temperature...

Pressure Sensitive Adhesive meets medical device guidelines.

Intended for medical devices where skin contact is possible, TM9616 consists of 1/16 in. white polyethylene foam, double-coated with acrylic-based, hypoallergenic, medical-grade adhesive. Adhesive is protected by semi-bleached kraft release liner with silicone release system on 2 sides. Product is formulated for sustained contact with human skin. Applications include ostomy mounts,...

How to Properly Implement Welding Automation to Improve Return on Investment (ROI)

Learn more about the value of automated welding systems, how to calculate your automation ROI, and how to get started.

Rubber-Toughened Adhesives are suited for OEM assembly.

ZipGripÃ-® adhesives consist of clear-drying cyanoacrylates that bond plastics, rubber, and metal; provide flexibility and impact resistance; and withstand service temperatures to 280Ã-

Double-Sided Tapes suit touch screen assembly applications.

ARcleanÃ-® 90178 and 90176 are 0.0035 and 0.005 in. thick non-corrosive tapes that provide perimeter spacer bonding in resistive touch screen and other similar electronic devices. They utilize electronically-clean, acrylic acid-free adhesive, and have low outgassing of VOCs. Tapes offer resistance to aging with ability to withstand temperature and humidity extremes. Both have polyester film...

Ceramic Adhesive suits applications to 3,000-

Ceramabond(TM) 552 consists of single-part, alumina-filled adhesive that adheres to ceramics and metals used in applications to 3,000Ã-

Die Attach Adhesive remains stable at high temperatures.

HysolÃ-® QMI 550EC silver-filled, conductive adhesive bonds integrated circuits and components to advanced substrates such as PBGAs, CSPs, and array packages. It produces void-free bond line with interfacial adhesion to variety of organic and metal surfaces. Hydrophobic product can be cured in-line using Skip-Cure processing in just 10 seconds after bond line reaches 150Ã-

Cyanoacrylate Adhesives are suited for flexible substrates.

LoctiteÃ-® 4851(TM) and 4861(TM) clear instant adhesives, suited for use on tubing, o-rings, rubber, paper, leather, and fabric, are formulated to provide reduced hardness. LoctiteÃ-® 4851(TM) medium-viscosity, single-component adhesive performs general-purpose bonding, while LoctiteÃ-® 4861(TM) high-viscosity, single-component adhesive bonds porous and absorbent materials. Both offer...

Cyanoacrylates cure under fluorescent light.

Low-viscosity LoctiteÃ-® FLASHCURE(TM) 4306(TM) and medium-viscosity LoctiteÃ-® FLASHCURE(TM) 4307(TM) offer instant fixture and tack-free surfaces in less than 5 sec when exposed to low-, medium-, or high-intensity light. They are surface insensitive and adhere to metals, elastomers, and plastics. Designed for assembly of components where ability to verify presence of applied adhesive is...

Micro Air's Dust, Fume, Mist Collection Equipment Facilitate a Safe Work Environment

Dust, fume, and mist collectors from Micro Air promote a safer, more productive work environment. Our wide array of products are available to the industrial manufacturing sector for processes such as welding, cutting, grinding, blasting, and more. Check out our video to learn more.