New Adhesives Products

Light-Cure Adhesives produce tack-free surfaces.

Loctite 3944(TM) single-component, medium-viscosity, light-cure, acrylic adhesive bonds plastic substrates that require tough, flexible bond. Fluorescent, low-odor product obtains tack-free surface in under 30 sec using low-intensity metal halide light source. Loctite 3526(TM) single-component, acrylic adhesive cures when exposed to UV/visible light or heat to form tough, flexible bond. Colorless...

Adhesive bonds optical components.

Optically-clear, ANGSTROMBONDÃ-® AB9053 is suited for bonding lenses, prisms, and quartz windows. Acrylic polymer has low refractive index of 1.41, offers UV cure in as little as 1 sec, and withstands temperatures up to 200Ã-

UV/Heat-Cure Adhesive suits mounting/coating applications.

Designed for mounting and coating in instances where heat cure is not possible, TRA-BOND 546S04 cures with UV light and has light gray finish when fully cured. It also cures with heat and retains bond strength under conditions of high temperature and relative humidity. Specific applications include general optics bonding, lens mounting, and glob top applications.

Liquid Adhesive is suited for automotive interior assembly.

Solvent-based, one-part BostikÃ-® 1920 adheres to low-energy surface substrates such as rigid polypropylene and polypropylene/polyethylene foams without requiring surface treatment or use of primers. With curing mechanism that reacts to ambient moisture, rubber-based product offers humidity and heat resistance to 230Ã-

Considerations for Choosing a Plastic Injection Molder

Choosing a plastic injection molder is no small decision. There are a number of factors that play into your selection, and it's important to consider them all to ensure you find the plastic injection molding company that suits your unique needs. This eBook is your guide to identifying those factors to help you make an informed decision.

Adhesive can be sanded to a nonporous finish.

Plastic Welder(TM) SD structural methacrylate adhesive fills gaps, bonds to green fiberglass without sagging, and can be used to join engineered plastics to dissimilar substrates such as metals, ceramics, and wood. High-strength, load-bearing bonds are resistant to weathering, impact, and peeling, and withstand service temperatures to 250Ã-

Adhesive and Sealants suit commercial applications.

QUIKRETEÃ-® Polyurethane Self-Leveling Sealant is non-staining and has virtually no shrinkage. Permanently flexible, polymeric, multi-purpose sealant is suited for horizontal joints and cracks. Offering abrasion and tear resistance, QUIKRETEÃ-® Polyurethane Non-Sag Sealant is suited for sealing vertical and overhead joints. QUIKRETEÃ-® Polyurethane Construction Adhesive is a...

Single-Component Roof Sealant is moisture-reactive.

BostikÃ-® GPS1 construction-grade sealant, suited for general-purpose sealing of dissimilar substrates, may be used in interior or exterior construction applications. Due to solids content, elastomeric urethane sealant produces seals that will not shrink or become brittle with prolonged exposure to weather extremes or UV rays. Physical properties include 135 psi tensile strength, 550%...

Potting/Encapsulation Compound resists thermal shock.

Two-component, epoxy-sealing EP110F6, for potting, encapsulation, and casting, has 1-2 mix ratio by weight and cures upon exposure to elevated temperatures. It provides electrical insulation and resists thermal cycling and shock. Medium-viscosity liquid passes Navy Hex Bar Test, MILI-16923C, consisting of 10 cycles from -55 to +155Ã-

Ceramic Adhesive withstands temperatures to 3,200-

Ceramabond(TM) 671 single-part, water-dispersible adhesive and coating system offers torque strength of 24.0 lb-ft, dielectric strength of 250 V/mil at room temperature, and coefficient of thermal expansion of 4.1 in./in./Ã-

Adhesive Film suits automotive assembly applications.

DublfilmÃ-® S812A is a thin polyester film coated on both sides with high-tack, high-peel acrylic pressure-sensitive adhesive. Adhesive offers resistance to environmental extremes, and polyester film carrier provides dimensional stability. DublfilmÃ-® S812A bonds well to ether and ester foams, as well as low surface energy plastics including untreated polyolefins.

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.