Adhesives

Die-Attach Adhesives offer optimized rheology.
Adhesives

Die-Attach Adhesives offer optimized rheology.

Intended for microelectronics and semiconductor industries, Electraset™ electrically conductive die attach adhesives conform to Test Method 5011 in MIL-STD-883. Electraset™ 620 couples low cure shrinkage with low coefficient of thermal expansion, minimizing chip or device warping and preventing cracking or delamination. Electraset™ 620-2 has virtually no bleed and minimal spreading,...

Read More »
Adhesive Gripping Material helps prevents towel contamination.
Adhesive Tapes

Adhesive Gripping Material helps prevents towel contamination.

Featuring water-resistant ShurStep® Non-Skid Abrasive Tape, Get A Grip stopsÂ- drying towels from falling to floor. This household product, comprised of die-cut, non-slip, peel-and-stick solution, applies in seconds to bathroom towel bars, kitchen appliances, and other racks/handles in various areas throughout home. Rubber-based adhesive coating adheres to any smooth, clean, and dry...

Read More »
Miscellaneous Film

Fabrico Medical to Exhibit Advanced Medical Fabrication Capabilities at the 2015 MD&M West Show

Rochester, NY – Fabrico Medical, a provider of custom manufacturing services and converter of thin flexible materials for the design-to-manufacture of medical devices and disposables, announces its participation in the 2015 MDM West Show, Booth #1642, February 10-12, 2015, at Anaheim Convention Center, Anaheim, CA.Â-  Fabrico Medical is also pleased announce that they will be exhibiting...

Read More »
Belt Conveyors

Innovative, Light-Curable Dymax Adhesives and Curing Equipment to be Showcased at MD&M West

Torrington, Connecticut – Dymax Corporation, a leading supplier of adhesives to the disposable medical device industry, will exhibit in Booth #2239 at MDM West, scheduled to take place February 10-12, 2015 at the Anaheim Convention Center in Anaheim, CA. With over 30 years of direct participation, Dymax continues to provide medical device manufacturers with innovative adhesive products and...

Read More »
Adhesives

Electric Paint suits 3D printing applications.

Consisting of electrically conductive liquid wire, Electric Paint can be used as cold-soldering medium or conductive adhesive. Non-toxic and solvent-free, product is suitable for rapid prototyping, repairing PCBs, and painting circuits and sensors on any surface. Once printed or applied, paint dries quickly at room temperature and can be removed with soap and water.

Read More »
Two Part, Room Temperature Curing Epoxy Features Ultra Low Coefficient of Thermal Expansion
Coatings

Two Part, Room Temperature Curing Epoxy Features Ultra Low Coefficient of Thermal Expansion

Master Bond EP42HT-2LTE is often chosen for a variety of bonding, sealing, coating and select casting applications in the electronic, aerospace, optical and specialty OEM industries. This two component epoxy has a flowable paste consistency that enables precise alignment with minimal fixturing. It cures at room temperature or more quickly with the addition of heat. This system is notable for...

Read More »
Adhesives

H.B. Fuller Wins OUTLOOK(TM) Asia Award

SHANGHAIÂ- – H.B. Fuller (NYSE: FUL) today announced that its leading innovative core adhesive, CHM-1088ZP, has won the inaugural OUTLOOK Asia Award, which recognizes innovative products and services for nonwoven personal care and hygiene products, made for, or by, the Asia Pacific and Indian subcontinent markets. Patricia Featherstone, Chair of the EDANA Board of Governors, announced H.B....

Read More »
Miscellaneous Film

Fabrico Medical to Exhibit Advanced Medical Converting Capabilities at the BIOMEDevice San Jose Show

Fabrico Medical to Exhibit Advanced Medical Converting Capabilities at the BIOMEDevice San Jose Show Rochester, NY – Fabrico Medical, a premier provider of converted materials and advanced assembly for the design-to-manufacture of medical devices and disposables, announces its participation in the BIOMEDevice San Jose Show, Booth #317, December 3 – 4, 2014, at the San Jose Convention Center...

Read More »
NASA Low Outgassing Approved, One Component Epoxy Features a Glass Transition Temperature of 225°C
Epoxies

NASA Low Outgassing Approved, One Component Epoxy Features a Glass Transition Temperature of 225°C

Formulated to operate over the wide temperature range of -80°F to +650°F, Master Bond EP17HT-LO is a one part epoxy for bonding, sealing, coating and encapsulation applications. This low viscosity system has very low exotherm upon curing and can be cast in sections up to and beyond a Â-½ inch in thickness. As a single component system, it offers convenient handling, doesn’t...

Read More »
Inks

Matched RFID Materials simplify printed electronics assembly.

Engineered to eliminate problems with printed electronics assembly, RFID-GO™ System includes BCE-37611 conductive inks, ANA-17710 die attach adhesives, and PNU-90250 dielectric inks. Since materials are developed as system, they can provide lower or higher resistance values, homogenous speed of cure, and one-pass printing for dielectric strength. Assemblers no longer have to worry about...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers