UV Curable Adhesive suits medical applications.
Acrylic-based, pressure-sensitive adhesive, HMPSA is tested and approved according to DIN ISO 10093 for cytotoxicity, skin irritation, and skin sensitization. It offers high heat resistance and has MVTR greater than 1,000 gsm/day. Product adheres to skin, but is residue-free upon removal. It is suited for moisture protection for wounds, patches for transdermal systems, and where transparency and...
Read More »Cyanoacrylate Adhesive resists humidity and temperature.
Surface insensitive LoctiteÃ-® PrismÃ-® 4500 Series cure speeds will not degenerate measurably over 21 month shelf life. LoctiteÃ-® PrismÃ-® 4500(TM) gel will not flow on vertical applications, while wicking viscosity Loctite Prism 4501(TM) flows into hard-to-reach areas. Loctite Prism 4502(TM) and 4503(TM) are low- and medium-viscosity cyanoacrylates, respectively, formulated for...
Read More »Pressure-Sensitive Adhesive suits laminating film.
Type 3629-CP permanent acrylic adhesive features medium tack and is intended for graphic arts and protective laminating applications. Offering high clarity and medium-high shear resistance, it permits initial repositioning, while still developing strong bond over time. Adhesive is offered on imaging, label, and over laminating films, and is also suited for custom or toll coating applications.
Read More »Glue Bottle offers precision control.
SOLO GLUE RITER features ball-and-spring valve with flat face that allows uniform Ã-½ in. film of adhesive to be applied. Product, supplied in 10 oz bottle, is suited for use in applying adhesive for matboard mounting, tipping and tabbing, case sealing, and spot gluing. Water-based food packaging adhesive, MATHESIVE 101, is also included.
Read More »A Guide to Trade Credit Insurance
This white paper provides a how to guide to trade credit insurance to protect your business from bad debt, optimize credit management, enhance working capital and accelerate growth.
Read More »Non-Drip Adhesive cures almost instantly in thin lines.
Able to bond plastics, rubber, ceramics, and metal, Permabond 2011 cyanoacrylate adhesive will not run or sag, even on vertical surfaces. It is suited for applications that require high-viscosity for ease of dispensing or to facilitate gap filling. Used in larger gaps, cure speed will be reduced to allow for proper positioning prior to cure. Product cures by reacting with traces of moisture on...
Read More »Multi-Purpose Adhesive adheres to low surface energy films.
Unex Tri-Mode aqueous adhesive is suited for laminations of polypropylene to paper, polyethylene to paper, polyester to paper, and paper to foil. Product provides high degree of wetting and is applied using only conventional apparatus. Applications include converting, packaging, and graphic arts industries.
Read More »Thermoplastic Adhesive suits temporary mounting applications.
Crystalbond(TM) 555 temporarily mounts ceramic substrates, semiconductors, and optical crystals that require dicing, polishing, and other machining processes. Ethoxylated-nonyl-phenol material bonds to ceramics, glasses, and metals. It becomes flowable at 120Ã-
Read More »Methacrylate Adhesive is designed for antenna assembly.
With elongation of 50-75% and roller peel of 23 pli, XD 4662-A/B gap-filling, light yellow liquid has mixed viscosity of 60,000 cP and lap shear strength of 3,050 psi on aluminum at room temperature. Product has 1:1 pbv mix ratio and attains handling strength after 18 min and full cure after 30 min @ 77Ã-
Read More »Panel-Bonding Adhesive meets automotive OEM specifications.
Used to replace quarter panels, roofs, box sides, utility doors, and door skins, Automix PN 08116 meets GM (6449G) and DailmerChrysler (MS-CD 507) failure-mode requirements. It facilitates non-structural repairs by reducing or eliminating need to weld. Surfaces are sealed and bonded in one application, and adhesive cures on-demand with heat. Glass beads in adhesive work as built-in spacers for...
Read More »Laminating Adhesives are solvent-free.
Mor-Free 205A with coreactant C66 is a 2-component, polyurethane adhesive system for film/film, film/aluminum foil, and film/metallized film retort applications. Mor-Free 1390A with coreactant C33 is a 2-component polyurethane adhesive system that is applied at low temperature for film/film retort applications. Mor-Free ELM 415A with coreactant 88-101 is an extremely low monomer adhesive system...
Read More »Acoustic and Thermal Solutions for Original Equipment Manufacturers
Technicon's products solve the most complex noise pollution and thermal problems and improve product marketability. Check out the video to learn more.
Read More »