Adhesives

Extreme Grip Adhesive eliminates need for nails and screws.
Adhesives

Extreme Grip Adhesive eliminates need for nails and screws.

Suitable for vertical applications, SikaBond® Ultimate Grab bonds to variety of construction substrates, including bricks, glass, metal, concrete, wood, and ceramics. One-component, moisture-cure, instant grab, polyurethane adhesive was developed with Sika's elastic technology, allowing maximum bond flexibility and recovery for long term durable bond. Product is packaged in 10.1 oz...

Read More »
UV Cure Adhesive suits circuit assembly applications.
Encapsulants

UV Cure Adhesive suits circuit assembly applications.

Designed to cure rapidly when exposed to high-intensity UV light, 535-11M-7 Epoxy is suitable for lens bonding in camera modules, chip encapsulation in smart cards, and variety of general bonding applications in photonics assembly. Flexible, high-strength epoxy adhesive is non-conductive, low-outgassing, and does not contain antimony.

Read More »
Two-Part Epoxy Paste has ultra low thermal resistance.
Coatings

Two-Part Epoxy Paste has ultra low thermal resistance.

Master Bond EP48TC has thermal resistance of 5–7 x 10–6 K•m2/W, which enables thermal conductivity of 20–25 BTU•in/ft2•hr•Ã‚°F. Applied in bond lines as thin as 10–15 microns, epoxy paste has tensile lap shear strength from 900–1,100 psi and bonds to metals, composites, glass, ceramic, and plastics. Working life for 100 gram batch at 75°F is 90–120 min. Curing at...

Read More »
Needle-Bonding Adhesive facilitates cure confirmation, inspection.
Adhesives

Needle-Bonding Adhesive facilitates cure confirmation, inspection.

With viscosity of 150 cP, 1405-M-UR-SC is formulated with Encompass™ technology that incorporates See-Cure color change and Ultra-Red™ fluorescing technologies with LED-curing capabilities. Medical device adhesive is blue in uncured state to aid placement verification and fluoresces bright red under 365 nm black light after cure. Suitable for bonding stainless steel, PC, PMMA, and ABS,...

Read More »
Polymers

Lubrizol Highlights Innovative Polymers at NPE 2015

CLEVELAND – Lubrizol Engineered Polymers announces that it will be showcasing several of its new and/or expanded polymer solutions at NPE 2015—The International Plastics Exposition—in Orlando, FL from March 23-27, in the South Hall, Booth #S12073. A global leader in supplying polymer solutions, Lubrizol will be highlighting its innovative offering including:...

Read More »
Conductive Adhesive electrically connects solar cells.
Adhesives

Conductive Adhesive electrically connects solar cells.

Stress absorbing to withstand rigors of thermal cycling, DB-1541-S9 is suited for stringing or shingling applications in crystalline silicon and thin-film solar modules. Adhesive electrically connects solar cells using ribbons or direct cell to cell contact. Providing optimized conductive stability to cell and ribbon metallization during damp heat exposure, adhesive is designed to gel rapidly and...

Read More »
Electrically Conductive Inks suit wearable electronics.
Inks

Electrically Conductive Inks suit wearable electronics.

Adhering to variety of natural and synthetic fibers, 125-19FSÂ- consists of flexible, screen-printable, silicone-based conductive ink that offers low-temperature performance to -70°C, and high temperature properties up to 325°C. Screen-printable 120-07 Ink is extremely conductive with optimal creasing resistance and washability features. Adhering to fabric substrates,...

Read More »
Thermoplastic Adhesive suits temporary mounting applications.
Adhesives

Thermoplastic Adhesive suits temporary mounting applications.

AdheringÂ- to ceramics, glasses, and metals, Crystalbond™ 509 is suitable for temporarily mounting substrates that require dicing, grinding, or polishing operations. Thermoplastic adhesive is applied by preheating mounting plate to 250°F, melting and spreading adhesive in uniform layer, then positioning part over adhesive, allowing entire assembly to cool. After processing,...

Read More »
Gels

Soft Silicone Adhesives suit skin applications.

Designed specifically for wound care, Silbione® HC2 2022 medium-viscosity silicone gel is compatible with most coating processes and applicable on wide range of substrates, including PU films, perforated films, and open knit fabrics. Product is manufactured in ISO 8 clean room in ISO 13485 facility to ensure microbial safety on breached skin. For wearable devices, scar management, and...

Read More »
UV-Cured Epoxy Adhesive increases electronic assembly reliability.
Epoxies

UV-Cured Epoxy Adhesive increases electronic assembly reliability.

Developed to pass reliability requirements in disk drive, camera module, photonics, and circuit assembly applications, 535-11M-3 eliminates crowning (warpage) of sliders in Head Gimbal Assemblies. This non-conductive, low-outgassing, flexible adhesive does not contain antimony and can be used in other bonding applications in Head Stack Assembly as well as for lens bonding in camera modules, chip...

Read More »

All Topics