Furnaces

Afc-Holcroft Installs New Caab(TM) Furnace Line in China

AFC-Holcroft is pleased to announce the recent installation of CAAB™ furnace for a division of a prestigious, multi-national corporation. The installation was delivered to the customer's facility located in China and will be used in the production of heat exchangers. The order for a the Controlled Atmosphere Aluminum Brazing (CAAB™) System included a gas heated continuous drying oven,...

Read More »
CW Low-Moded Laser is designed for thin material spot welding.
Welders

CW Low-Moded Laser is designed for thin material spot welding.

Used when welding thin materials or where it is preferred that weld is not visible from back, Low-moded 200 W laser evenly spreads energy over- area to remove high intensity peak. Beam is tailored to suit application with appropriate degree of intensity and mode stability, resulting in profile that avoids cratering or break throughs in spot weld. CW or up to 100 kHz modulation...

Read More »
ABB Robotics and Fronius Reach Global Agreement to Collaboratively Develop Fully Equipped Welding Packages
Robots

ABB Robotics and Fronius Reach Global Agreement to Collaboratively Develop Fully Equipped Welding Packages

Relationship will provide customers cost-effective robotic welding systems, easier operation, and integrated programming interfaces AUBURN HILLS, Mich. – ABB Robotics and Fronius International, a leading worldwide welding equipment company, have entered a global agreement to collaboratively develop fully equipped robotic welding packages, and support both new and existing customers with...

Read More »
Welding Brushes are designed for different base metals.
Applicator / Finishing / Cleaning Brushes

Welding Brushes are designed for different base metals.

Radius™ Welding Brushes clean base material before welding and between each pass. Featuring steel-wire bristles, brushes for stainless steel include toothbrush-style 3 x 7 row brush, 2 x 9 row brush with slightly curved handle, and 3 x 19 row brush. For aluminum, toothbrush-style 3 x 7 row brush and 2 x 9 row brush with slightly curved handle have brass-wire bristles. With tempered-steel...

Read More »
Noise Control Solutions for Standby Power Generators
Sponsored

Noise Control Solutions for Standby Power Generators

This paper examines effective noise control solutions for standby power generators, while describing the step-by-step approach to develop noise, thermal, and other improvements in power gen-set enclosure designs. It includes details of the materials upon which successful noise control solutions in the power generation industry are based. The factors to be considered while developing a new enclosure design, different steps in developing an effective noise control solution for existing enclosure designs, and the methods for controlling the airborne noise in a power generator are listed. Flame resistance properties of noise control materials, thermal management, environmental considerations, and material durability considerations are also explained. Also included are descriptions of 2 noise control solutions based on 2 different power generators together with graphical representations.

Read More »
Sonobond's Free, No-Obligation Ultrasonic Bonding Viability Test Helps Companies Find Practical, Cost-Effective Solutions for Their Textile and Filtration-Assembly Applications
Testing Services

Sonobond's Free, No-Obligation Ultrasonic Bonding Viability Test Helps Companies Find Practical, Cost-Effective Solutions for Their Textile and Filtration-Assembly Applications

Sample ultrasonic bonds are made using materials supplied by prospective customers.-  Sonobond then recommends the appropriate ultrasonic bonding equipment to match each firm’s specific needs and requirements. WEST CHESTER, PA - Janet Devine, President of Sonobond Ultrasonics, announced today that the company's free Ultrasonic Bonding Viability Test is proving to be very important to firms in...

Read More »
Threaded Tube Inserts offer thread sizes from 3/8-16 to
Inserts

Threaded Tube Inserts offer thread sizes from 3/8-16 to

Available in tube sizes from 1.5–2 in., SQH Square Heavy Duty Series and RDH Round Heavy Duty Series are made from black glass-filled nylon with brass threaded insert, making them suitable for indoor and outdoor use. Corrosion-resistant units feature static load rating up to 2,000 lb. For tilting- and swiveling capability, SQH and RDH can be used in conjunction with AFM Series Swivel/Tilting...

Read More »
Replacement Electrodes feature silver insert.
Welding Rods, Wire and Electrodes

Replacement Electrodes feature silver insert.

Combining copper electrode body with solid silver insert, Silver-Pro Electrodes are available for Hypertherm® HPR 130®/260® systems, ESAB® PT-600® system, and Kjellberg® PERCUT 160®/170®/370.1® systems. Silver insert optimizes conductivity of electricity and dissipates heat of plasma arc more efficiently than standard copper electrodes, resulting in extended electrode life.

Read More »
Welders

Freudenberg Captures Sustainability Award for Unique Manufacturing Process that Reduces Engineered Waste

•- Â Â Â  Proprietary technology wins 2013 Manufacturing Leadership 100 (ML100) Award •Â Â Â Â  Alternative to stamping will help Freudenberg achieve zero manufacturing waste and achieve its sustainability objectives •Â Â Â Â  Process is faster, safer and eliminates up to 1,800 tons of scrap steel per machine per year PLYMOUTH, Mich. – Freudenberg Sealing...

Read More »
Presses

Luminite Product Corp Acquires Patent for Load-N-Lok

Bradford, Pennsylvania - Luminite Products Corp, a laser-engraved flexographic sleeve and cylinder supplier, announces acquisition of the patent for their mandrel-free air sleeve system",-  Load-N-Lok (patent #8,307,764). The Load-N-Lok system allows the press operator improved efficiency by reducing start-up waste, improved press times, and multiple print repositionings.  Now available for...

Read More »
MetalMaster
Furnaces

MetalMaster

CHERRY VALLEY, IL – A company in southern Singapore, specializing in the repair and refurbishment of commercial jet engine turbine airfoils, recently acquired an Ipsen 2 bar MetalMaster® vacuum furnace. Customers often look to the MetalMaster line due to its sustained relevance and reputation in the industry," says Craig Moller, Ipsen's Chief Engineer, "It works well and it will continue to...

Read More »
Precision Machined Parts for High Tech Applications
Sponsored

Precision Machined Parts for High Tech Applications

For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.

Read More »

All Topics