Die Wires for repairing metalworking components.
ToolTherm 225FC-G flux cored, gas shielded die wires have tensile strength of 140,000 psi, making them suitable for applications including forging hammers, die impressions, shafts, and rams. Wires are available in 3/32 and 1/8 in. dia; 3/32 in. wire has current range of 350-500 A and wire extension of Ã-¾ to 1Ã-¼ in.; 1/8 in. wire has current range of 500-700 A with wire extension of 1 to...
Read More »Tungsten Electrode starts arcs reliably.
TriMix(TM) multi-dopant blend, non-radioactive tungsten is made from three rare earth tungstens. Mix provides reliable arc starting, especially after numerous prior ignitions; reduced burn-off rate; prolonged service life; and high quality arc.
Read More »Weld Shaver removes welds.
Hand held 2 hp Model WS-500 removes welds at 6-8 fpm. It uses standard carbide inserts in milling cutter to shave weld beads flush to work piece. Weld shaver will remove only weld and not damage surrounding materials. It can be used for cleaning butt welds and corner welds.
Read More »Welding Stations reduce scrap and rework.
Arc Welding Stations, consisting of AWS-150 and Pulsarc, integrate welding elements to provide precision arc systems requiring minimum operator skill. Stations are available with speed control, arc distance control, and wirefeed. TIG and Plasma weld currents from 0.1 to 300 A are offered. Options include computer controlled and front panel controlled systems, welding lathes, positioners, orbital...
Read More »Confused About Which Screw Drive Style to Choose? Don't Lose Your Head!
This white paper outlines the different types of screw head and drive designs.
Read More »Welding Pen offers combination of speed and tacking tip.
Model S Welding Pen has protected heating element for operator safety and dial adjustable temperatures from 68 to 1100Ã-
Read More »Bonders cut and seal in one pass without consumables.
SureWeld 20 kHz ultrasonic plunge welders can assemble cylindrical filters from pleated HEPA filter media. In overlapping applications, ultrasonic welders bond and trim edges of pleated filter media in one step to create 10 in. filter tube, which maintains HEPA rating. SureWeld bonders feature rectangular support columns, which eliminate deflection and keep filter unit in perfect alignment during...
Read More »Wire welds in virtually any position.
All position (AP) 2209T-1 gas shielded flux cored wire can be welded with either 100% CO2 or Argon/CO2 gas mixtures. Wire features spray like arc transfer and slag removal. AP 2209 wire is available in .045 and 1/16 in. dia. Former has 130 to 220 amperage range and 24 to 27 voltage range, while latter offers 170 to 300 amperage range and 25 to 28 voltage range. Composition is balanced to achieve...
Read More »Welding Wire is rated for earthquake-prone areas.
Classified under AWS A 5.20-95, CoreshieldÃ-® 6 E70T-6 flux cored wire is suitable for bridge and structural applications in seismic areas. It meets FEMA 353 specs for welding in earthquake-prone regions. Wire provides smooth and stable arc, low spatter, easy-to-remove slag, and lower fume generation level. Coreshield 8 exhibits same characteristics as Coreshield 6, but is for all position...
Read More »Cutting Inserts improve efficiency and productivity.
Aluminum Cutting Inserts are available in WCGT 05 and WCGT 06 sizes to mount into existing OTM HOLESHOT(TM) and HOLESHOT(TM)-IS (Integral Shank) drills. Available in grade 12, inserts feature highly polished surfaces and up-sharp geometry for drilling aluminum. Their polished surfaces reduce coefficient of friction for drilling in soft, gummy material.
Read More »Laser Measurement Instrument suits alignment applications.
AlignMeterÃ-® simultaneously measures laser beam position and angular displacement for beams up to 8 mm in diameter. Absolute angle and position can be measured with accuracies of 1 mrad and 1 micrometer, respectively, without having to know distance of source from sensor. Results are updated at 10 Hz. It also measures absolute output power from 10 microWatts to 10 mW at wavelengths from 350...
Read More »Ensure Safety, Reliability in Your Cement Plant with Aerzen Blowers and Compressors
Aerzen offers blowers and compressors for challenging cement applications such as pneumatic conveying from raw mill to raw meal silos, combustion air, cement silos fluidization, and more. At Aerzen, safety is our top priority. Check out our video to learn more.
Read More »