New Welding Equipment & Supplies Products

TIG Welder features adjustable balance control.

Syncrowave-® 180 SD TIG/Stick power source allows operators to preset welding amperage with digital meters. Output is 10 to 180 A in both AC and DC TIG welding mode. Selectable arc start function controls initial volume of current to create soft start, standard start, and hot start. Adaptive Hot Start feature automatically increases amperage during arc start when required. Fan-On-Demand cooling...

Radius Inserts allow 90 degree milling.

AP Milling Inserts with -46 geometry are offered in industry standard radii, including 0.031, 0.063, 0.094, 0.157, 0.197, and 0.252 in. Grade X500 is for extreme applications and grade SP6564 is for applications in steels, stainless steels, and high temperature alloys.

Weld Heads allow welding of pipes and tubes in place.

Quickclamp Weld Heads are designed for GTAW circumferential butt welding of pipes and tubes. They cover size range from 1 in. OD tube to 6 in. pipe. Units include electronic Arc Gap Control, filler wire feed capability, torch rotation, and torch oscillation with adjustable stroke width, speed, and end point dwell. Heads mount using adjustable clamp. Standard 2 lb wire spool, mounted directly on...

Laser Microgage provides machine alignment.

Microgage 2D consists of laser transmitter and square receiver. It delivers precision of 0.001 in. and can be used for measuring in 2 axial directions at same time, even when distance between laser and receiver varies as much as 70 ft or more. Processing unit provides measurement readings in X and Y axes and offers controls for zeroing readings. RS232 interface provides data for PCs and laptops....

Steel Wire Selection Guide for Various Applications

Download this eBook to learn about how steel wire products can be used for a variety of applications.

Welding Wire suits submerged arc-welding applications.

Low alloy steel StoodyÃ-® ThermalCladÃ-® Roll Build 3 produces deposit of unlimited thickness. Sizes include 3/32 in. diameter with amperage range of 300-400, voltage range of 25-29, and wire extension range from 1 to 1Ã-¼ in.; 1/8 in. diameter for 400-500 A, 26-30 V, with wire extension of 1Ã-¼ to 1Ã-½ in.; and 5/32 in. diameter for 450-600 A, 28-32 V, with wire extension of...

Pipe Welding System is portable for use in field.

Model 510 Pipemaster automates pressure pipe welding for pipes 1 in. and larger. GTAW process weld heads make multiple pass welds on pressure piping where pipe cannot be rotated. Unit incorporates 300 A power source with weld head controls and microprocessor programming capability. Controls are provided for weld Head rotation, arc voltage control, torch oscillation, and filler wire feed....

Wire Welder OHV Engine

Ranger-® 8 is offered with 20.5 hp, twin-cylinder, air-cooled Onan-® Performer-® gasoline engine that runs at 3,600 rpm. Automatic engine shutdown protects against low oil pressure and prevents engine damage, while automatic engine idler offers fuel economy and noise control. Ranger 8 Onan OHV suits Stick, DC and AC TIG, and general purpose CV wire feed welding. Unit offers 8,000 W continuous...

Open Arc Welding Wire withstands high stress applications.

StoodyÃ-® 600 offers abrasion and impact resistance and produces titanium carbide bearing deposit. Wire is available in 7/64, 3/32, and 1/16 in. dia. Wire with 7/16 in. dia has 45-550 amperage (A) range, 30-32 voltage (V) range, and 1Ã-½ in. wire extension. Wire with 3/32 in. dia has 400-500 A range, 28-30 V range, and 1Ã-½ in. wire extension. With 1/16 in. dia, wire has 225-275 A...

Flux-Cored Wires resist elements and improve conductivity.

Copper-covered Thermal Arc-® SF-1 and SF-1A (E71-T1) flux-cored welding wires prevent moisture absorption and rust. They have no seams, flux voids, or strip seams. Sizes range from .045 to .052 in. diameter. SF-1 is welded in CO2 shielding gas while SF-1A is designed for 75 Argon-25CO2. Both wires feature low spatter and easily removed slag cover.

Stud Welding System suits robotic production lines.

KSE100 servo-operated weld gun provides precise gun shaft positioning, closed-loop stud feeding, pulse welding, and simplified maintenance. It handles auto feed stud types from 3 to 8 mm shank dia. Position feedback system and servo electric drive controls arc length, lift and plunge velocity, and depth penetration of each stud weld. Programmable pulse welding mode produces square-wave that...

Locon Sensors Withstand Extreme Temperatures

Locon Sensor Systems offer robust sensor solutions for even the most severe environmental conditions. Their line of high-temp inductive sensors and their cylindrical photoelectric series can operate in temperatures up to 250 degrees Celsius. See our video to learn more.