New Welding Equipment & Supplies Products

Brass Inserts have hexagonal heads.

Series 40 through-hole and Series 44 blind-end hexagonal, molded-in, brass inserts are suitable for placement in plastic molds prior to plastic injection. They do not require specialized insertion tools, and are manufactured to simplify orientation and placement onto mold core pins. Hexagonal head provides bi-directional torque resistance and large undercut provides high-tensile strength.

MIG Welding Guns work in high heat applications.

Air-cooled Spray Master(TM) guns are available in 250, 350 and 450 A models. All come with heavy-duty contact tips and diffusers. Short conductor tubes allow operator to get closer to work piece. Guns are rated at 80% duty cycle with argon/CO2 gases. 350 and 450 A models are available with optional locking or dual schedule triggers.

Weld Head provides high purity welding of micro-fittings.

UHP Mini-Micro(TM) Orbital Weld Head can be used to weld micro-fittings and tubing from 1/8 to 1/2 in. OD. Water-cooled design ensures long-term operation at 100% duty cycle with no damage to head. Unit features vise clamping tool steel jaws and narrow profile. Weld heads up to 6 in. OD are also available.

Weld Head offers scissors clamping mechanism.

Scissors-Lock Orbital Weld Head provides alignment for precision welding of tube up to 6 in. OD. It features heavy-duty construction, reliable arc starting, and efficient gas coverage for clean welds. Micro-weld heads down to 1/8 in. OD are also available.

How to Choose the Right Vacuum Chamber

To learn more about avoiding the pitfalls in choosing a vacuum chamber manufacturer and KTC's expertise in this area, download this white paper now.

Turning and Milling Inserts are PVD coated.

SpectraTurn(TM)and SprectraMill(TM) inserts are coated with TiAln or AlTiN for edge strength and wear resistance. Heat produced in cutting process is carried away by chip. TiAlN coated insert grades are suitable for dry milling and for high-speed turning. AlTiN coated inserts are ideal for milling titanium and titanium alloys.

Torch Tip reduces brazing time.

TurboTorch(R) Extreme(R), for use with air/acetylene in HVAC/R and plumbing applications, uses rotor to generate hot swirl, and reduces brazing time by as much as 40% compared to company's previous products. Field testing showed that operators experienced less wait times in joint brazing, and quickly adapted to tip's faster/hotter characteristics. Applications include high-volume OEM and...

Reverse Expansion Insert presses into plastic hole.

Suitable for strengthening plastic joints, Series 18 brass reverse expansion insert is used in applications where bolt enters insert from headless end rather than from headed end. Its head provides high level pull-through resistance and its diamond knurl provides directional torque resistance for bolt installation. Unit does not require any specialized insertion tools, so it can be installed by...

Welding Products include power sources, drives, and feeders.

CST(TM) 250 Stick/TIG power source provides 250 A for stick and TIG welding. CST Rack for multiple operators can hold up to 4 welding units. Bobcat(TM) 250 NT engine driven welding generator's rated output in CC/DC/AC mode is 250 A at 25 V, 100% duty cycle. 70 Series constant-speed wire feeders are available in bench-top, boom-mounted, and single- and dual-wire configurations.

Metal Thread Inserts fit wood and composition board.

Three metal thread inserts install without need for special tools. Knife thread inserts, available with coarse and fine internal threads, furnish holding power in hard woods such as oak, maple, and mahogany. Finsert thread inserts provide strong metal threads in softer materials, and prevent splintering, splitting, and thread pullout. Hex Drive thread inserts are for soft materials such as pine,...

Ultrasonic Welder is designed for thermoplastics industry.

Handheld Model H-540 40 kHz, 500 watt welder can be used for staking, inserting and spot welding applications. Microprocessor based programmable timer offers weld times from 0.1 to 9.9 sec. DB9 I/O connector is provided to interface with automated machines via PC or PLC. Autotune circuitry eliminates need to tune system when changing horns. Compact unit is suited for manual operations with low...

Simple Connection � MGB with EtherNet/IP

The new MGB with EtherNet/IP is a leap forward in access door safety. Designed for easy installation, flawless performance, and long service life, it is engineered with robust features and cutting-edge technology that places it firmly at the leading edge of the door safety device industry. To learn all about the benefits of the Euchner MGB, see our video.