New Welding Equipment & Supplies Products

Stick/TIG Inverter offers 5-150 A welding range.

MaxstarÃ-® 150 Series includes Stick only, Stick/TIG Lift-Arc start, and Stick/TIG high frequency or Lift-Arc start models. All have Stick output of 150 A at 30% duty cycle, enabling nearly unlimited welding with 1/8 in. diameter Stick electrode. Auto-Line feature allows units to connect to 115-230 Vac single-phase power, Ã-

Seam Welder features forgiving weld parameters.

TWINLAP Seam Welder joins materials up to 84 in. wide, 3.5 mm thick full hard, and 4.0 mm thick soft material. User can achieve results of 2-pass operation with single pass of machine. Welder is offered with pneumatic or hydraulics and either single phase AC, or single or 3-phase DC weld control. It is primarily for automotive grade and difficult to weld full hard materials such as DP 600/800,...

Laser Alignment System improves manufacturing efficiency.

Dual-Axis Microgage 2D can measure horizontally and vertically at same time. It provides straightness, flatness, parallelism, and squareness measurements to 0.001 in. over distances of 50 ft. System will monitor mechanical misalignment and runout, align rails and slides, position machinery sub-assemblies, and align bores and drive shaft mechanisms. It can be attached to PC or laptop for...

Tap Aligning Center simplifies hand tapping.

Equipped with No. 2 Morse taper, Tap Aligning Center has spring center used to align taps when hand tapping in lathes or drilling machines. Suited for awkward tapping operations, product does not require user to constantly adjust center. Physical characteristics include hardened 5/16 in. dia center, 1 in. plunger travel, and overall length of approximately 5Ã-½ in.

Confused About Which Screw Drive Style to Choose? Don't Lose Your Head!

This white paper outlines the different types of screw head and drive designs.

Pedestal-Style Welder features flexible, compact design.

Series INV welder can be used as freestanding machine or incorporated into automated welding cells. It can be supplied with up to 5 in. cylinder that produces approximately 1,600 lb of weld force or 2 in. cylinder that produces 60 lb of force. Welder can be furnished with ac transformers, ranging from 7Ã-½ to 50 KVA, or dc inverter power supplies for up to 140 KVA. It has 8 in. throat depth...

Torch Tips suit scrap-cutting applications.

Available for VictorÃ-® and Harris(TM) style torches, Bulldog(TM) Tips by CutSkill(TM) feature heavy-wall, 2-piece construction that withstands rigors of scrap cutting. Products may be used with LP propane and natural gas torches in cutting up to 14 in. and resist slag build-up. Applications include scrap yard and demolition cutting tasks.

Welding Electrode suits out-of-position applications.

Innershield NR-233 self-shielded flux-cored wire electrode (AWS E71T-8) incorporates proprietary microflux(TM) technology and is available in 1/16 in. electrode diameter wound on 12.5 and 25 lb spools. Designed for high deposition rate welding, product offers minimized gas marking. Applications include seismic or general structural steel erection and ship and barge fabrication.

Compact Welding System is available in Ready-Pak(TM) version.

Rated at 350 A, multi-process Power Wave(TM) 355 provides Waveform Control Technology(TM), which controls and shapes output waveform to produce optimal arc characteristics for MIG, Pulsed MIG, and flux-cored welding applications. Package supplies all components for operation, including Power Wave 355 inverter power source; Power Feed(TM) 10 wire feeder, with one-piece, split wire-guide system;...

Packaged TIG Accessories simplify set-up.

TIG-Mate(TM) Starter Packs provide Lincoln Pro-Torch(TM) TIG torch, HarrisÃ-® flowmeter/regulator, parts kit, work cable, hoses, and adapters. Packaged in padded protective carrying case, kits are offered for TIG power sources with Twist-Mate(TM) output connectors and built-in gas solenoid for both air-cooled and water-cooled systems. For power sources with Twist-Mate output connectors...

Welding Cart keeps workspace neat and mobile.

Welding Cart can store and transport welder, gas cylinder up to 7 in. diameter, welding cables, and accessories. It has angled top shelf for easy access to welder controls, lower tray for added storage space, and sturdy handle which also serves as cable wrap hanger. Adjustable brackets securely hold variety of portable welders or plasma cutting systems. Welding cart supports total weight of 120...

Aerzen USA Process Gas Blower and Compressor Installations Worldwide

Aerzen is firmly established as a global leader in compressed air, gas, and vacuum solutions. Our reputation as an industry leader is built on consistently delivering innovative products that are at the cutting edge of technology. To learn about the industries finest blowers and oil-free and oil-injected screw compressors, see our video.