New Waste Management & Waste Handling Equipment Products

Turning and Milling Inserts are PVD coated.

SpectraTurn(TM)and SprectraMill(TM) inserts are coated with TiAln or AlTiN for edge strength and wear resistance. Heat produced in cutting process is carried away by chip. TiAlN coated insert grades are suitable for dry milling and for high-speed turning. AlTiN coated inserts are ideal for milling titanium and titanium alloys.

Dust Collector meets workplace air specs.

Gold Series(R) line of cartridge dust and fume collectors use Poly-Tech(TM) silicone-impregnated polyester/cellulose media. Collectors meet or exceed 5 mg/cu m emissions threshold on non-hazardous dusts required to recirculate air back into workplace. They are suitable for removal of all types of fine, dry dusts. Optional 99.99% efficient version removes 0.5 micron and larger particles for more...

Dust Collector suits low headroom installations.

Side Winder Model DKCD 72030 is a 30 HP, 7,500 CFM dust collector featuring side mounted fan and flat envelope-shaped filters. It is only 122 in. tall, and typically used for collection of wood dust from maintenance shops and removal of powders caused by mixing or blending. Dust is collected in four 55-gal drums. Unit can be installed outdoors or indoors if local fire codes permit.

Spill Kits are easy to locate.

PIG(R) High Visibility MRO Spill Kits come in lime-green containers, making them easy to see, even in low light. Constructed of 100% polyethylene, they contain variety of socks, mats and pillows to absorb up to 61 gal of non-aggressive liquids. Kits are available in 95 gal and 65 gal sizes, and include yellow caution disposal bags, instructional manual, and emergency guidebook. Tamper-proof seals...

Microcontrollers in Power Electronics

This white paper explores the power supply advantages of digital microcontrollers, as well as how digital power supplies can be used to manage entire systems.

Dust Collector allows continuous production.

Whirl/Wet Dust Collection System has radiused welds so that material cannot accumulate in unit. Its 100% polypropylene construction makes it highly resistant to mechanical damage. System is available in capacities from 500 to 50,000 cfm, and suitable for applications that generate dusts larger than 2 microns. It is self-cleaning and functions without pumps or internal moving parts. PLC monitors...

Reverse Expansion Insert presses into plastic hole.

Suitable for strengthening plastic joints, Series 18 brass reverse expansion insert is used in applications where bolt enters insert from headless end rather than from headed end. Its head provides high level pull-through resistance and its diamond knurl provides directional torque resistance for bolt installation. Unit does not require any specialized insertion tools, so it can be installed by...

Plug converts sensors into controllers.

SmartPlug adds control functions such as timing, counting, inverting and speed monitoring to sensors. Approximately 2 in. long, it connects between cable and sensor. Programming is done via teach input device available separately. Inverter version converts PNP input signal to NPN or vice versa, or NO to NC. Timer is programmable from 1 ms to 65 sec. Counter is programmable to count pulses or...

Spill Cleanup Kit is available with refill rolls.

Spill Kaddie mobile emergency kit picks up 22 gallons. It contains 1 roll of (200) 7 1/2 x 9 in. pads, (5) 3 in. x 4 ft socs, (8) 9 x 9 in. Pillows, 1 pair of goggles, 1 pair of Nitrile gloves, (5) 6 mil plastic bags, and 1 Emergency Response Handbook. Measuring 18 x 17 x 39 in., Spill Kaddie may be stored in space-constricted places, and offers black wheels for maneuverability. MRO-15 DPS 15 in....

Control System monitors up to 16 different channels.

Crakker(TM) self-contained high-speed logic/timing analyzer monitors I/O points with voltage inputs ranging from 5Vdc to 400Vdc or to 280Vac. It monitors and records each voltage transition and stores information to memory. This information is downloaded into Crackker Communications v3.0 program and analyzed. Transisitions are as fast as 165uS. Software includes single window programming function...

Soldering Iron Control also handles hot plates.

Compact Dial-Temp controller lets users make fixed temperature irons adjustable from 150Ã-

TPA Motion Introduces New Curved Linear Rail Guides: the CR40 Series

For the ultimate in precision open and closed loop guided motion systems, TPA Motion is the leader in curved rail, liner guides. We specialize in engineering excellence, with products that exhibit an elevated level of precision, delivering robust performance, even under the most challenging conditions. See our video to learn more.