Dust / Fume / Mist Collectors

Aerodyne Offers System Evaluation Services That Decrease Maintenance Costs
Dust / Fume / Mist Collectors

Aerodyne Offers System Evaluation Services That Decrease Maintenance Costs

The Aerodyne Environmental now presents range of system evaluation services to dust collection system operators via Dust Efficiency Clinic. The services include a safety assessment and a collection assessment. The safety assessment evaluates facility’s hoods, ductwork, explosion vents and housekeeping areas and suggest for areas of improvements. In collection assessment, the team gathers...

Read More »
Latest Dust Collection System from Van Tongeren is Suitable for Capturing Fine Particles
Dust / Fume / Mist Collectors

Latest Dust Collection System from Van Tongeren is Suitable for Capturing Fine Particles

The Pulse Jet Fabric Filter Dust Collection System is designed for removing more than 99 percent of particulates from an airstream. The design of the system controls the airflow direction through the baghouse. The system directs the portion of particulates into the hopper below before the contact with the filter bags. It captures fine particles from processing aggregates, manufactured sand,...

Read More »
Aerodyne Launches Dust Hound Dust Collector Featuring Carbon Steel Construction
Dust / Fume / Mist Collectors

Aerodyne Launches Dust Hound Dust Collector Featuring Carbon Steel Construction

The Dust Hound Dust Collector is offered in DH-24, DH-30 and DH-48 models that are 42.38, 54.38 and 89.50 in. tall respectively. The collector utilizes specially shaped ground plate for creating localized pressure drop and diverts dust towards the walls for interrupting airflow. The cyclone is suitable for use in ceramics, plastics, metal powders, food ingredients, industrial woodworking and...

Read More »
Seal Stuff In, Seal Stuff Out
Sponsored

Seal Stuff In, Seal Stuff Out

One of the best ways to make sure that your machinery stays up and running in the face of adversity is to make sure that it's properly sealed. Of course, it's not always easy to determine whether the integrity of your seals are up to par. How can you tell when you have a problem?

Read More »
Stand-Alone Dust Collector is equipped with dual filter cartridges.
Dust / Fume / Mist Collectors

Stand-Alone Dust Collector is equipped with dual filter cartridges.

Flexicon’s Stand-Alone Dust Collector features NEMA 4X water-resistant controls and stainless steel housing. Unit comes with 15 mm diameter side inlet port, 1.5 kW fan motor and 70 L collection hopper with flanged slide gate valve. Collector’s automatic reverse-pulse filter cleaning system releases short blasts of compressed plant air inside the filters that allows dust to fall into the...

Read More »
Dust / Fume / Mist Collectors

Total Dust Control Solution for All Methods of Sand Handling

TULSA, Okla., March 30, 2017 - AIRIS Wellsite Services is demonstrating the comprehensive scope of its total dust control solution. A leading E&P company contracted with AIRIS to bring its last mile logistical system into full compliance with respect to respirable crystalline silica exposure levels. "The universal nature of our total dust control solution means we can rig up on traditional sand...

Read More »
Dust / Fume / Mist Collectors

AIRIS Demonstrates Cutting-Edge Dust Collection Tools

SPRING, Texas, Nov. 18, 2016 - Breakthrough technology to safeguard the health of frac site workers was unveiled this week by AIRIS Wellsite Services. Hundreds were invited to a demonstration of both the patented ADV-4 AIRIS Dust Vacuum and AIRIS' new personal decontamination unit. "Pictures and videos don't do justice to our equipment," says Grant Goetz, Executive Sales for AIRIS...

Read More »
Dust / Fume / Mist Collectors

VAC-U-MAX President, Steve Pendleton, Accepts Award from UBM Canon for 40 Years of Exhibition at the Powder and Bulk Solids Show

Belleville, NJ, USA – This year’s Powder Bulk Solids Conference Exhibition (Powder Show) marked the 40th anniversary of the inaugural Powder Show, which first debuted in 1976. The Powder Show is the dry processing and bulk solids handling industry’s largest trade event, where both US and other manufacturers exhibit the latest innovations in bulk solids handling. This year’s event also...

Read More »
Dust / Fume / Mist Collectors

Lee Contracting Installs Structures and Systems for the First Kingfa (USA) Facility

Pontiac, Mich. – Lee Industrial Contracting, Inc., a premier company in “Providing TurnKey Solutions for Plant Projects”, completed manufacturing work for the grand opening of the first North American Kingfa Scientific and Technologies Co. (USA) facility in Canton, Michigan. Headquartered in Guangzhou, China, Kingfa is a global leader of the advanced material industry producing modified...

Read More »
Adding In-House Blast Capabilities | ABS Blast Rooms
Dust / Fume / Mist Collectors

Adding In-House Blast Capabilities | ABS Blast Rooms

Industry: Industrial Equipment Re-Manufacturer Application: Rebuild/Re-manufacture Industrial Municipal Equipment Components Abrasive Blast Systems, Inc. recently designed and installed a custom sandblast room which incorporated a below-floor, sweep-in, pneumatic-recovery trough. The sandblast room is 16'W x 30'L x 17'H and features an overhead crane system with two 5-ton bridge...

Read More »
Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber
Sponsored

Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.

Read More »

All Topics