Material Dispense Valve delivers precise beads.
Designed for precision dispensing of low- to high-viscosity flowables, Tip-SealÂ-® Model 2200-245-051 employs zero-cavity design for handling solvent-based, moisture-curing, and stringy materials. Sealing at tip prevents material from hardening in nozzle, oozing, or dripping. Pneumatically actuated valve has carbide tip, titanium-coated shaft, hardened seat, and wear-resistant fluid seals....
Read More »Emerson Announces ATEX Approval for Fisher-® DVC2000 Digital Valve Controller
Newest member of the FIELDVUEÂ-® family is approved for use in potentially explosive atmospheres MARSHALLTOWN, IOWA (April 11, 2006) -- Emerson Process Management announces that the FisherÂ-® DVC2000 series digital valve controller now has ATEX Certification to EEx ia 11C T4/T5, making it suitable for use in potentially explosive atmospheres. The Fisher DVC2000 is an intelligent valve...
Read More »Ball Valves are suited for steam and industrial fluids.
M-Series line of ball valves features blow-out proof stem, modular seat/seal assembly, integrated seat and body gasket, floating ball, static discharge capability, and carbon steel and 316L SS construction. Available in Â-¼-2Â-½ in. NPT, M10V/S suits manual operations, and M10Si ISO suits automated valve configurations. Models M31SFB ISO and M40V/SRB ISO are offered for manual operation...
Read More »
Quick-Response Miniature Isolation Valves Feature a Range of Customizable Materials and Configurations to Meet Chemical Compatibility Requirements
Boonton, NJ: The series of five fully customizable miniature isolation valves available from Bio-Chem Valve and Omnifit feature a flexible mix and match construction that is determined by solenoid shell size, manifold mountability, and flow configuration. Valve shell diameters are available in 0.38 inch, 0.75 inch and 1.00 inch to correspond to orifice diameters from 0.032 inches to 0.125 inches...
Read More »
Compressed Air Systems and Components
Download this e-book for more information on compressed air systems and components.
Read More »
Mix-Dispense Valve delivers miniature material beads.
Two-component Model 2200-545-037 uses No-DripÂ-® technology for dispensing solvent-based, moisture-curing, and stringy materials such as epoxies, silicones, and polyurethanes. Pneumatically actuated valve opens and closes carbide resin- and catalyst-material passages at mixer entrance to precisely start and stop material flow. It has stainless steel wetted components, dual carbide...
Read More »
Mixing Valve features lockable temperature adjustment knob.
Suited for commercial and institutional applications, single-fixture Model 108 Thermostatic Water Mixing Valve incorporates 3/8 in. connections and wax element to control temperature. It allows for close approach temperature, so that mix temperature can be within 5Â-
Read More »
Solenoid Valve is designed for food service applications.
Suited for food processing applications that require media-separation, 3B23 features long-life solenoid that incorporates fully encapsulated coil with stainless steel plunger and tube assembly. Other features include 6.5 W coil and single in-line valve body with metal reinforced 1/8 in. NPT threads. Offered in NC configuration, it provides flow rates up to 1.5 gpm and employs rolling diaphragm,...
Read More »Quadrant's M2-SS Cryogenic Ball Valve passes BS6364 Testing at Yarmouth Testing Labs
On February 2, 2006, Quadrant's M2-SS 3-Piece Cryogenic Ball Valve successfully passed both British Standard BS6364 Valves for Cryogenic Service and the new MSS Valves for Cryogenic Service Draft Standard. This testing requires immersion in liquid nitrogen @ -321F for one hour, then (20) cycles at full rated pressure (1920PSIG) with helium as a test gas, then valve is tested for both external and...
Read More »Modular Valve controls compact equipment.
Rated 10.6 gpm and 4,350 psi, VO40 Open-Center Directional Control Valve can be stacked to 10 sections. Optional lock-valve section can be used in applications where no leakage or function drift is allowed. Metering notches on spool lands let operator actuate functions simultaneously, while slotted design of valve sections allows users to add or change sections and functionality. Enclosed handle...
Read More »Ball Valves meet low lead requirements.
Designed to meet or exceed requirements of NSF/ANSI 61-8/9, PermaLynx Series 300 consists of multi-purpose shut-off valves for hot and cold water systems and compressed air services. Units feature full port, forged brass body, chrome-plated brass ball, and push-to-connect ends. For sealing, valves utilize PTFE thrust washer, VitonÂ-® O-ring, and PTFE packing. Offered in Â-½-2 in. sizes,...
Read More »
Simple Connection – MGB with EtherNet/IP
The new MGB with EtherNet/IP is a leap forward in access door safety. Designed for easy installation, flawless performance, and long service life, it is engineered with robust features and cutting-edge technology that places it firmly at the leading edge of the door safety device industry. To learn all about the benefits of the Euchner MGB, see our video.
Read More »
