Three Way Valves are offered in brass or stainless steel.
Four seated, 3-way ball valves come in L and T port designs, offer 14 flow path options, and allow any port to be used as entry. Brass models have low torque design, are rated to 400 psi, and come in sizes from Ã-¼-3 in. Stainless steel models are rated to 1,000 psi and come in sizes Ã-¼-2 in., in standard and full port options. All L and T port 3-way valves are ISO direct mount style for...
Read More »Diaphragm Action Valve works with UV resins and adhesives.
Suited for dispensing applications, Model DV509-UV-LF features wetted chamber compatible with low- to medium-viscosity UV materials. Diaphragm seal is attached to solenoid that opens upon receiving air signal from valve controller. Diaphragm flexes to allow fluid to exit for duration that seal is opened, and return spring snaps diaphragm shut after air signal is removed. Valve is rated at 200...
Read More »Containment Valve provides complete worker safety.
Suitable for areas where operator exposure levels are limited and high containment operations are essential, Containment Valve System is designed in active and passive sections, and is air-operated using single actuator. Centering bolts ensure proper alignment while vacuum sealing, and connection to dust collection system guarantees complete containment. Mobile cleaning unit provides cleaning of...
Read More »Fluid Valve provides precise on-off flow control.
Suited for medium to high-viscosity fluids, pneumatically actuated No-DripÃ-® Model 2600-060 features wear-resistant fluid seals, carbide seat, and tungsten-carbide ball-end needle with anti-abrasive, hard-coated shaft. Valve body has three 3/8 NPT inlet fluid ports and 3/8 NPT outlet port. Dowel and screw holes allow in-line or surface mounting. Rated for 5,000 psi, valve can be used to...
Read More »Finding the Right Bore Configuration for your Application
There are multiple things to consider when choosing a bore configuration for your application. Check out this e-book to learn more!
Read More »NPT Valves and Fittings suit high-pressure environments.
Designed for safe plumbing, NPT valves and fittings are made of 316 stainless steel. Pipe connection valves come in 2-way straight and 2-way angle body configurations, in 1/8, Ã-¼, 3/8, Ã-½, Ã-¾, and 1 in. sizes, and are engineered for optimal repeatable quality. Fittings, available as elbows, tees, and crosses, accommodate 10,000 or 15,000 psi and all above-listed NPT tubing...
Read More »Proportional Control Valves handle gases and liquids.
Offered in brass or stainless steel, KFPV050 Series direct-acting, 2-port plunger valves provide stepless variable control of gases and liquids. Solenoid can be oriented 360Ã-
Read More »Bypass Valve controls excess flow in hydronic systems.
Designed for systems where heating loads may be excluded from circuit as zone valves close, Differential Bypass Valve helps minimize velocity noise caused by excess flow through circuits while maintaining pump head at constant valve. Unit features all brass body with non-ferrous internals and Ã-¾ in. connection. Installed horizontally or vertically, valve has max working pressure of 150 psig...
Read More »Explosion-Proof Solenoid Valve suits hazardous environments.
Offering universal 5/2 or 3/2 operations in offshore, processing, and chemical industries, EExd NAMUR series is suited for piloting single or double actuators on NAMUR solenoid valves. High-flow (Cv = 1.4) design incorporates Nitrile seals and submersible, water/dust-tight aluminum body. Solenoid activated spool valve system allows for response times up to 5 cycles/sec, and coil duty cycle is...
Read More »Control Valves handle critical throttling conditions.
Featuring floating ball design, bi-directional Worcester CPT Series characterized seat control valves can be used in systems that control steam pressure or pH levels, operate in low temperature cryogenic conditions or up to 1,000Ã-
Read More »Bell & Gossett Introduces New Line of Air Vents
Morton Grove, Illinois - December 11, 2006 - A complete line of new manual and automatic air vents designed to remove troublesome air in a variety of hydronic systems is available from Bell & Gossett. Ranging from rugged high-capacity air vents for liquid systems to compacted air vents for new types of radiators, the new line includes: 107A - a rugged high-capacity air vent that purges free air...
Read More »More performance and functionality for Sinumerik 828D CNC
Siemens new SINUMERIK 828D ADVANCED, SINUMERIK 828D and SINUMERIK 828D BASIC sets the standard for productivity enhancements of turning and milling operations on standardized machines and simplify the automation of grinding machines. See our video to learn all about it.
Read More »