New Thermal & Heating Equipment Products

Electrically Heated System treats aluminum sheets in labs.

Along with pneumatically operated quench system, Electrically Heated Solution Treat System is built with furnace that has 1 ft x 1 ft 6 in. x 1 ft basket and 1,200Ã-ºF max operating temperature. Load can drop into quench tank or onto load/unload platform for ambient air cool. Featuring bottom-up airflow, system achieves part temperature uniformity of Ã-

Side-Actuated DIP Switch has 1.28 mm layout pitch.

Ultra-miniature, half pitch TDP Series features dual bifurcated wiping action to ensure reliable contact. When mounted horizontally, side-actuation mechanism provides visual confirmation of on/off status. Process-sealed for SMT wash processing, RoHS-compliant devices feature gold over nickel over copper alloy contacts and UL 94V-0 PPS flame retardant housing. Switches measure 4.16 mm above PCB...

NETGEAR-® and Nokia Siemens Networks Collaborate on 3G Femto Home Access Solution

NETGEAR's New Femtocell Voice Gateway (DVG834GH) with ADSL2+, Wi-Fi, VoIP and 3G Femtocell Technology to Interoperate with Nokia Siemens Networks' Open Architecture SANTA CLARA, Calif. and ESPOO, Finland, Feb. 7 - NETGEARÃ-®, Inc. (NASDAQ:NTGR), a worldwide provider of technologically advanced, branded networking solutions, and Nokia Siemens Networks, a leading global enabler of...

NEC and NETGEAR Team to Develop an Integrated 3G Access Point for Femtocell Solution

LONDON and SANTA CLARA, Calif., Feb. 7 - NEC Corporation, a leading global provider of internet and broadband network solutions, and NETGEARÃ-® Inc, a worldwide provider of technologically advanced, branded networking solutions, today announced that they are collaborating to develop an Integrated 3G Access Point that will be incorporated within NEC's Femtocell Solution offering. NEC provides...

Whitepaper: 7 Trends for IoT in Hospitality

Check out this white paper to see how the IoT can be used in your hotel to reduce energy consumption, increase guest satisfaction, improve maintenance, and more.

Hall-Effect Switch targets battery-operated applications.

Model A1171 ultra-sensitive micropower Hall-effect switch features operating supply voltage of 1.65-3.5 V and consumes less than 15 Ã-µW with 2.75 V supply. Polarity specific actuation can be set by user via external selection pin to operate in unipolar mode. Available in 2 x 1.5 x 0.4 mm EW 6-pin micro-leaded DFN package, it has 2 push-pull output structures which source and sink current....

Memory Module Cooler uses integrated heat pipe.

Available in black, blue, and plain aluminum, HXR-5500 features aluminum extrusion heatsink with integrated 5 mm dia heat pipe used to cool memory modules. Heat pipe transports heat from memory module onto detached aluminum heat sink on top of module. By using this product, memory module temperature can be reduced by 13 to 14Ã-

Dryer-Dehumidifier-Cooler processes bulk solid materials.

Intended for 3-A and USDA applications as well as applications involving contamination-sensitive materials, Rotary Batch Dryer-Dehumidifier-Cooler features all-stainless contact surfaces, continuous polished welds, and external removable seals. Configurations are available for both direct and indirect drying, dehumidifying, and cooling. Offering usable batch capacity of 20 cu-ft and total...

Illuminated Pushbutton Switch features IP65 sealed design.

Available in threaded or snap-in panel mount configurations, Series RP8100 offers contact ratings of 125 mA at 125 Vac and 100 mA at 50 Vdc. Initial contact resistance is 5 mW, while insulation resistance is 1,000 MW at 500 Vdc, and dielectric strength is 1,000 Vac rms. Operating from -30 to +85Ã-

Dodeka(TM) Face Mills from Kennametal: Maximum Milling Performance in Carbon and Stainless Steels

(LATROBE, PA) - For demanding face-milling applications in steel, stainless steel, cast iron, ductile iron, and other materials, Dodeka(TM) inserts and cutters from Kennametal are engineered to deliver higher cutting speeds and feed rates along with extended tool life. The results are improved cutting performance and productivity across demanding materials. Compared to competitors' face-milling...

Revolutionary Hand Dryer Now Available from Cannon Hygiene USA

Cannon Hygiene USA introduces the Dyson Airblade-which dries hands in just 12 seconds making it the fastest most hygienic hand dryer available. Additionally, the Airblade is: o Cost Effective: Delivers cost savings of nearly 98 percent compared to paper towels o Energy Efficient: Uses up to 80 percent less energy than conventional hand dryers o Hygienic: HEPA filtered to remove bacteria from the...

ISO-Certified Plastic Injection Molding from Rodon

The Rodon Group is a proven leader in high-volume, close tolerance injection molding. We offer globally competitive, innovative manufacturing solutions for a broad range of industries. Check out our video to learn more.