New PFL20 Linearstep Stepper Motors That Reach a Force of Up to 6N at 200 pps
Compliant to RoHS standards and has effective stroke of 30/60 mm. Deliver 24 steps per revolution and the lead screw comes with 1.2 mm thread pitch. Features resistance and inductance of 33 Ohms/phase and 12mH/phase respectively with rated voltage of 5V.
Read More »
New PFL20 Linearstep Stepper Motors That Reach a Force of Up to 6N at 200 pps
Compliant to RoHS standards and has effective stroke of 30/60 mm. Deliver 24 steps per revolution and the lead screw comes with 1.2 mm thread pitch. Features resistance and inductance of 33 Ohms/phase and 12mH/phase respectively with rated voltage of 5V.
Read More »
Surestep IP65 Rated High-torque Stepping Motors Use 2-Phase Technology with 200 Full Steps per Revolution or 1.8 Degrees per Full Step
Protected from solids and dust ingress and from low-pressure water jets from any direction, making them suitable for many washdown applications. Fully sealed, single-shaft motors are available with industry-standard NEMA 17, 23 and 34 mounting flanges. Available in single-shaft configurations and have a 1-ft. cable and locking connector.
Read More »
Surestep IP65 Rated High-torque Stepping Motors Use 2-Phase Technology with 200 Full Steps per Revolution or 1.8 Degrees per Full Step
Protected from solids and dust ingress and from low-pressure water jets from any direction, making them suitable for many washdown applications. Fully sealed, single-shaft motors are available with industry-standard NEMA 17, 23 and 34 mounting flanges. Available in single-shaft configurations and have a 1-ft. cable and locking connector.
Read More »
Responsible Spill Remediation in the Food & Beverage Industry
There are two major areas in which food & beverage product handling will take place: processing and distribution. As with all product handling scenarios, spills are an inevitable occurrence within both of these spaces.
Read More »
Oriental Motor's New Stepper Motor Offers High Torque and Thrust Loads, Low Backlash
Comes with Neugart’s planetary PLE gearheads which are 25% lighter. Available for 42mm (1.65in.), 56.4mm (2.22in) and 85mm (3.35 in.) frame sizes. Features low friction bearing design for continuous operation without sacrificing performance.
Read More »
Oriental Motor's New Stepper Motor Offers High Torque and Thrust Loads, Low Backlash
Comes with Neugart’s planetary PLE gearheads which are 25% lighter. Available for 42mm (1.65in.), 56.4mm (2.22in) and 85mm (3.35 in.) frame sizes. Features low friction bearing design for continuous operation without sacrificing performance.
Read More »
ISL Presents Customizable Stepper Motors That are Controlled by an Open-Loop System
The ISL’s Stepper Motors are available in frame sizes ranging from NEMA 8 to NEMA 52 with a 1.8 degree (2-phase) step angle. The motors are customizable in parameters such as brake, gearhead, torque density, voltage, output speed, encoder/driver, power, current, step-angle and shaft configuration. These motors are suitable for use in industrial automation, retail and vending machines, robotics,...
Read More »
ISL Presents Customizable Stepper Motors That are Controlled by an Open-Loop System
The ISL’s Stepper Motors are available in frame sizes ranging from NEMA 8 to NEMA 52 with a 1.8 degree (2-phase) step angle. The motors are customizable in parameters such as brake, gearhead, torque density, voltage, output speed, encoder/driver, power, current, step-angle and shaft configuration. These motors are suitable for use in industrial automation, retail and vending machines, robotics,...
Read More »
New HX56-100 Stepper Motors are Certified for Use in Hazardous Locations
The Applied Motion’s HX56-100 Stepper Motors are offered in Type4X and IP66 enclosure and can be used in ATEX and IECEx certifications for Class 1, Zone 1 locations in which flammable gases, vapors or liquids exists. They are designed for use with STAC6-Q-H stepper drive that features advanced anti-resonance algorithm. This STAC6-Q-H drive is capable of running stored programs that are created...
Read More »
New HX56-100 Stepper Motors are Certified for Use in Hazardous Locations
The Applied Motion’s HX56-100 Stepper Motors are offered in Type4X and IP66 enclosure and can be used in ATEX and IECEx certifications for Class 1, Zone 1 locations in which flammable gases, vapors or liquids exists. They are designed for use with STAC6-Q-H stepper drive that features advanced anti-resonance algorithm. This STAC6-Q-H drive is capable of running stored programs that are created...
Read More »
Let Our Safety Experts Lower Your Risk
Elite Technical Services provides your company with qualified and experienced safety experts. Specializing in confined space and high-angle technical rescue and jobsite hazard assessment, your workplace safety is the top priority. Check out the video to learn more.
Read More »
