Hybrid Stepper Motors promote precise motion control.
Able to adapt to closed loop control systems, HM series includes 42 and 57 mm frame sizes each with short stack, one stack, or 2 stack design. Windings can be customized to satisfy application requirements, and several optional encoder mounting features are available. Depending on stack length, HM 42 mm motors provide holding torque to 65 oz-in., and HM 57 mm motors deliver 330 oz-in. max....
Read More »
Integrated Stepper Motors feature CANopen connectivity.
Integrating NEMA step motor, microstepping drive, and controller, STM24 Series provides holding torque up to 340 oz-in. Profile Position, Profile Velocity, and Homing modes are fully supported at data rates up to 1 Mbps. S versions accept step and direction, analog input, joystick control, and streaming host commands using SCL language, while Q versions add stand-alone programmable operation...
Read More »
Brushless Stepper Motor suits high torque applications.
Featuring 2-phase, tin-can style design, Model PF55 is available with both unipolar and bipolar windings. With unipolar winding, unit offers holding torque of 120 N, while bipolar winding provides 150 N of holding torque. In full-step excitation mode, motor has 48 steps/rev, rated voltage of 5 and 12 V, inductance from 12-37 mH, and 5-36 W resistance. Gearhead version, available with 20 ratio...
Read More »
AC Motor and Driver Package offers TTL-based encoder.
AC input stepping motor and driver package, RK Series, is available with 3-channel, 500-line, TTL-based encoder option. Closed-loop, low-vibration, low-noise stepping motor solution comes in 42, 60, 85, and 90 mm frame sizes. Additional features include 0.72Â-º resolution and strain relief. Various motors are available, with 3 gear types and microstepping driver with built-in Smooth Drive....
Read More »
Whitepaper: 7 Trends for IoT in Hospitality
Check out this white paper to see how the IoT can be used in your hotel to reduce energy consumption, increase guest satisfaction, improve maintenance, and more.
Read More »Stepper Motor offers high torque in a thin stack package.
Featuring 48 steps/revolution and unipolar winding, Model PFC35TH measures 15 mm at its widest point and offers max holding torque of 33 mNm. Unit features rated voltage of 9 V, starting pulse rate of 400 pps, slewing pulse rate of 470 pps, and 37 W resistance. With total height of 27 mm, tin-can rotary motor is suited for printing, packaging, and medical devices.
Read More »
Linear Stepper Motor simplifies linear motion system design.
Model PFL35T LINEARSTEP® tin-can type linear actuator offers direct linear motion without need for any mechanical transformers. Product has 35 mm OD and is available with 0.48, 0.96, and 1.2 mm lead screw pitches. In addition to neodymium magnets, features offered include bipolar and unipolar windings, up to 39.5 N force rating, rated voltages of 5 and 12 V, and 48 steps per revolution....
Read More »Linear Stepper Motor Stages suit robotic applications.
Featuring travel speeds to 80 ips and stroke lengths to 144 in., series of 2 and 4 phase linear steppers offer 2, 6, 10, and 20 lb of continuous force and acceleration to 1G. For 2 phase motors, resolution is one full step equals .010 in. and one microstep equals .00004 in. For 4 phase motors, resolution is one full step equals .005 in. and one microstep equals .00002 in. Steppers are suitable...
Read More »
Gearhead Stepper Motor delivers high torque from small package.
Intended for space-restricted projects in medical device industry, PF25G is offered with unipolar or bipolar winding and 24 or 48 steps/revolution. Depending on winding and step number, motor has rated voltage of 5 or 12 V, resistance from 15-122 ohms, and holding torque from 8-12 mN-m. Other features include max torque vales from 20-100 mN-m, starting pulse rate of 490 or 790 pps, and motor...
Read More »
Linear Stepper Motors accommodate custom requirements.
Available in unipolar or bipolar configurations, Saia® ULE Series provides constant positioning force to 400 N over full travel lengths to 300 mm in ambient temperatures ranging from -15 to +60°C. Compact 55 x 55 mm design and NEMA 23 mounting flange enable mounting in space-restricted applications such as valve control, positioning and adjustment systems, and control systems for...
Read More »
Oriental Motor Now Offers Encoder Options for All Angles of Stepping Motors
First time offering from Oriental Motor provides customers purchasing stepping motors with more options than ever before. Torrance, CA - Oriental Motor is pleased to announce that encoder options are now available for their 0.36Â-º and 0.72º stepping motors. With the addition of the encoder option to 0.36º and 0.72º stepping motors, Oriental Motor's entire range of...
Read More »
Optimize Your Storage or Distribution Facility with Steel King Rack Solutions
Steel King racks are designed to meet seismic requirements in the most demanding conditions. Our durable storage products help your company save on maintenance costs. Check out our product video or download our Rack Planning eBook to learn more.
Read More »
