Stepper Motors

Stepper Motors

Intelligent Stepless Motor is deisgned for reliability.

Based on hybrid step motor, 42 x 42 x 70 mm iMOT172S XM-CANÂ- reaches peak torque of 500 mNm at 1,000 rpm without gearbox. One PCB integrates magnetic encoder and iPOS motion controller that utilizes Technosoft MotionChip™ technology and provides 7 I/Os. Configuration, tuning, and local programming of iPOS drive can be done using EasyMotion Studio platform, and absolute...

Read More »
Motorized Lead Screws offer resolutions from 0.00016-0.005 in.
Stepper Motors

Motorized Lead Screws offer resolutions from 0.00016-0.005 in.

Combining hybrid stepper motor and lead screw in one unit, Motorized Lead Screws come in Rotating Screw and Rotating Nut motor configurations. NEMA frame sizes between 11 and 23 can be selected with various lead screws available in metric and imperial sizes. NEMA 23 variant delivers max axial thrust up to 200 lb. Where more load capacity is required, single and double stack configurations are...

Read More »
Stepper Motors

Severe Duty TEFC Motor suits air-cooled heat exchangers.

Constructed of cast iron, NEMA Premium® SD661 features corrosion-resistant hardware, bearing isolators on both ends, and T-drains at lowest point on both ends. IP56-rated motor is suitable for horizontal, shaft up, or shaft down mounting and is equipped with oversized roller bearings for belted applications. Available in 5–75 hp range, motor includes 90° rotatable cast iron conduit...

Read More »
Stepper Motors

Baldor Linear Motor Product Line Acquisition

Effective September 24, 2014, H2W Technologies, Inc. ( H2W") headquartered in Santa Clarita, California, USA acquired the following Baldor linear motor products (Cog Free Brushless, Iron Core Brushless, Single Axis Stepper, Dual Axis Stepper, Polynoid, AC Induction, Voice Coil Actuators). Utilizing Baldor tooling and manufacturing practices, H2W will manufacture direct replacement linear electric...

Read More »
Stepper Motor minimizes stalling and skipped steps.
Stepper Motors

Stepper Motor minimizes stalling and skipped steps.

Providing holding torque up to 150 oz-in., Xtreme Torque E5618 Stepper Motor with Enhanced Technology keeps application continuously running smoothly. NEMA 23 stepper features 0.71 oz-in.Â-² inertia and is built for fast acceleration. Offering solution for applications with heavy loads or those at risk of stalling or skipping steps, motor is available with integral connector or flying lead...

Read More »
Stepper Motor/Driver Packages achieve optimal application results.
Stepper Motors

Stepper Motor/Driver Packages achieve optimal application results.

CVK Series includes 24 Vdc input driver combined with 2 stepper types featuring 1.8°, 0.72°, and 0.36° step angles. While 1.8° motor type offers highest torque in low-speed range, 0.72° motor type maximizes mid- to upper-speed range, and 0.36° motor type provides optimal positional. Offering 5 frame sizes from 0.79–2.36 in., series has common driver size,...

Read More »
AMCI Webinar Explains PLC-Based Stepper Motion Control Basics
Stepper Motors

AMCI Webinar Explains PLC-Based Stepper Motion Control Basics

Terryville, CT — Advanced Micro Controls Inc. (AMCI), recently sponsored an educational webinar describing the basics of PLC-based stepper motion control. The webinar was hosted by The Journal from Rockwell Automation and explained the basic parts of a stepper system, how they integrate with PLCs, and how they compare with servos. Other stepper related topics included EtherNet/IP™,...

Read More »
Explosion Proof Motors feature IP55 rating.
Stepper Motors

Explosion Proof Motors feature IP55 rating.

Suitable for applications requiring UL and/or CSA certification for hazardous locations, Fractional HP Explosion Proof Motors include 2-pole and 4-pole TEFC single-phase models ranging from 1/3–2 hp and 1/3–1.5 hp, respectively. Three-phase versions include 2- and 4-pole TENV at 1/3 hp, 2-pole TEFC from ½–3 hp, and 4 -pole TEFC from ½–2 hp. Rated for 122°F ambient, motors feature...

Read More »
igus® Presents Maintenance-Free Systems for the Packaging Industry
Stepper Motors

igus® Presents Maintenance-Free Systems for the Packaging Industry

The plastics expert offers a range of cost-effective, zero-maintenance options for packaging machinery design igus is presenting a range of innovative new products specially developed to meet stringent demands of the packaging industry. Manufacturers of packaging machinery rely on high-performance components, especially where products must be packed in a timely and energy-efficient manner....

Read More »
Disc Magnet Motor delivers dynamic performance.
Stepper Motors

Disc Magnet Motor delivers dynamic performance.

By combining disc magnet technology with optimal number of pole pairs, closed loop P760 series delivers high torque and acceleration up to 5,000 rpm. High-speed stepper motor can deliver torque of 0.7 Nm with inertia as low as 17E-7 Kgm2. Performance meets needs of applications, such as electronic yarn guides, medical XY tables, and robotics, where rapid changes in acceleration and direction of...

Read More »

All Topics