Stepper Motors

Stepping Motor Driver can run 2 motors simultaneously.
Stepper Motors

Stepping Motor Driver can run 2 motors simultaneously.

With 2-channel drive function, Model TC78S122FNG can run 2 stepping motors independently in high-voltage, low-power MOS process. Bipolar IC also provides interface for driving brushed DC motors, enabling use of stepping motors and brushed DC motors together in 6 combinations. Channels can be paralleled to double power handling. Housed in HTSSOP package with max ratings of 40 V and 2 A, device...

Read More »
ECPM Motors include 7.5 and 10 hp models.
Stepper Motors

ECPM Motors include 7.5 and 10 hp models.

Driven by variable frequency drives, 7.5 and 10 hp PremiumPlus+™ Motors boast motor-only rated point efficiency of over 94%. Electronically Commutated Permanent Magnet motors feature flux-focusing stator and rotor hub geometry with all-ferrite magnet design. To facilitate substitution of AC induction motors, units are packaged in standard NEMA frame sizes and mounting dimensions. Â-

Read More »
Gearhead Stepper Motor delivers high torque from small package.
Stepper Motors

Gearhead Stepper Motor delivers high torque from small package.

Intended for space-restricted projects in medical device industry, PF25G is offered with unipolar or bipolar winding and 24 or 48 steps/revolution. Depending on winding and step number, motor has rated voltage of 5 or 12 V, resistance from 15-122 ohms, and holding torque from 8-12 mN-m. Other features include max torque vales from 20-100 mN-m, starting pulse rate of 490 or 790 pps, and motor...

Read More »
High Torque Stepping Motors have high efficiency design.
Stepper Motors

High Torque Stepping Motors have high efficiency design.

PKE series 2-phase motors have 1.65 in. square frame size and come in 3 stack lengths of 1.3 (PKE243x), 1.54 (PKE244x), and 1.85 (PKE245x) in. Output torque ranges from 34 oz-in. for PKE243A-L unipolar model up to 77.8 oz-in. for PKE245DA-L bipolar model. Offered with standard or double shafts, motors achieve shaft speeds of more than 2,000 rpm with 24 Vdc driver. Low heat generation enables...

Read More »
Stepper Motors

Nippon Pulse to Showcase Products at ATX South

Motion Control Specialist in Booth 2122, Will Showcase Linear and Stepper Motors RADFORD, VA -- For the first time, Nippon Pulse, a leader in the motion control industry, will be exhibiting its products at ATX South, the top automation showcase tradeshow in the South/Southeast Region. This year's show will be held at the Charlotte Convention Center from April 28-29, 2010. In its inaugural...

Read More »
NEMA 34 Steppers
Stepper Motors

NEMA 34 Steppers

Santa Clara, CA - Lin Engineering is pleased to announce that the 8718 NEMA 34 step motor series has been recognized with a certification of compliance to Underwriters Laboratories Inc.'s (UL) standards. The 8718 product line is a series of high torque, 2 phase stepper motors. The motors are available in three body lengths: 2.6 , 3.8 , and 5.0 and are capable of up to 1,288 oz-in of holding...

Read More »
Integrated Stepper Motor/Drive operates at up to 1,500 rpm.
Stepper Motors

Integrated Stepper Motor/Drive operates at up to 1,500 rpm.

Model STM23 is size 23 motor and drive, contained in aluminum heatsink housing, with RS232/RS485 interfaces for programming drive using rich instruction set software. Motor operates in closed loop mode and coding can be downloaded to drive or unit can be controlled using commands from attached controller. With supply of 12-80 Vdc and 0.2-5 A peak output current, it is offered in single or double...

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics