New PFL20 Linearstep Stepper Motors That Reach a Force of Up to 6N at 200 pps
Compliant to RoHS standards and has effective stroke of 30/60 mm. Deliver 24 steps per revolution and the lead screw comes with 1.2 mm thread pitch. Features resistance and inductance of 33 Ohms/phase and 12mH/phase respectively with rated voltage of 5V.
Read More »
Surestep IP65 Rated High-torque Stepping Motors Use 2-Phase Technology with 200 Full Steps per Revolution or 1.8 Degrees per Full Step
Protected from solids and dust ingress and from low-pressure water jets from any direction, making them suitable for many washdown applications. Fully sealed, single-shaft motors are available with industry-standard NEMA 17, 23 and 34 mounting flanges. Available in single-shaft configurations and have a 1-ft. cable and locking connector.
Read More »
Oriental Motor's New Stepper Motor Offers High Torque and Thrust Loads, Low Backlash
Comes with Neugart’s planetary PLE gearheads which are 25% lighter. Available for 42mm (1.65in.), 56.4mm (2.22in) and 85mm (3.35 in.) frame sizes. Features low friction bearing design for continuous operation without sacrificing performance.
Read More »
ISL Presents Customizable Stepper Motors That are Controlled by an Open-Loop System
The ISL’s Stepper Motors are available in frame sizes ranging from NEMA 8 to NEMA 52 with a 1.8 degree (2-phase) step angle. The motors are customizable in parameters such as brake, gearhead, torque density, voltage, output speed, encoder/driver, power, current, step-angle and shaft configuration. These motors are suitable for use in industrial automation, retail and vending machines, robotics,...
Read More »
Choosing the Best Industrial Facial PPE Supplier: 5 Key Factors
Paulson is an industry leader in PPE production, most notably face and eye protection. Learn more now about what factors are most important to consider when choosing a PPE supplier.
Read More »
New HX56-100 Stepper Motors are Certified for Use in Hazardous Locations
The Applied Motion’s HX56-100 Stepper Motors are offered in Type4X and IP66 enclosure and can be used in ATEX and IECEx certifications for Class 1, Zone 1 locations in which flammable gases, vapors or liquids exists. They are designed for use with STAC6-Q-H stepper drive that features advanced anti-resonance algorithm. This STAC6-Q-H drive is capable of running stored programs that are created...
Read More »
Latest AR and RKII Series Stepper Motors are Suitable for Space Saving Applications
The AR series and RKII Series Stepper Motors are now offered with face gear (FC) type right-angle gearhead. The FC gearheads are offered with two cable orientations in 42 or 60 mm mounting face. The AlphaStep AR Series stepper motors are available with built-in controller or pulse input driver and can be operated continuously without hunting or gain tuning.
Read More »
Applied Motion Products Customizes Integrated Motor to Increase Package Handling Flexibility of New Innovative Conveyor System
Watsonville, CA…November 8, 2018…Applied Motion Products customized an integrated stepper motor package that offered a single motion control solution for an innovative conveyor system that saved on space, wiring, and cost over conventional motor and drive solutions. Capable of handling packages in a variety of configurations, the innovative conveyor system needed a motor and actuator assembly...
Read More »
AutomationDirect Adds SureStep Stepping System Motors, Encoders and Inertia Dampers
New stepper motors, encoders and inertia dampers have been added to the SureStep® system of step motor control. SureStep series high-torque industry-standard NEMA 14, 17, 23, and 34 stepper motors now provide holding torque from 8 to 1288 oz-in. The new smaller frame size NEMA 14 motors (1.4 wide) start at $22.00 and are available in single and dual shaft versions. The SureStep family has...
Read More »
New Stepper Motor from Oriental Motor Features a Right-angle FC Type
Oriental Motor’s new AZ Series FC Type stepper motor has a new “Face gear.” It is a compact, orthogonal, shaft geared motor comprised of a disc-shaped gear that works with a spur gear. The gearhead’s slim size makes it optimal for high precision, compact, and space saving applications. The product is available with two cable orientation, in a 42 mm or 60 mm mounting face and in both AC...
Read More »
New Stepper Motors Use a Neodymium Magnet in its Rotor Design
The PKP Series of stepper motors from Oriental Motors was recently expanded to include a 2-phase Flat Type and a 5-phase TS Geared stepper motor. The stepper motors now use a neodymium magnet in its rotor design which allows for a lower vibration when compared to the original PKP stepper motors. The 2-phase Flat Type is available in 2 frame sizes at 1.65 inches or 2.22 inches. The 5-phase TS...
Read More »
Let Our Safety Experts Lower Your Risk
Elite Technical Services provides your company with qualified and experienced safety experts. Specializing in confined space and high-angle technical rescue and jobsite hazard assessment, your workplace safety is the top priority. Check out the video to learn more.
Read More »
