NK Technologies Presents AT/ATR-TH Series Current Transducer in Triple-Aperture Solid-Core Design
The AT/ATR-TH Series Current Transducer is designed for monitoring three-phase loads, motors, machines, and buildings. The device can detect open discharge lines, clogged filters, or blocked intake to pumps in water delivery and treatment systems and over/under current conditions. It is powered externally with 24 VAC or DC (22–18V) and provides a choice of 0–10 to 0–200 A. The sensor mounts...
Read More »
BEA Lasers Introduces Eagle Eye Sensor with a Sensing Range of 20 m
The Eagle Eye Sensor™ consists of a through-beam photoelectric laser source and a receiver. The unit is available with a red (650 nm) laser and a dot optic. The sensor can be operated with 10 to 30 VDC in -5⁰C to +50⁰C temperature range. It is offered in M12 x 58 mm Nickel-plated brass housing that can withstand ambient stresses of factory environment. The sensor operates at the speed of...
Read More »
Latest UtilityScan GPR System Comes with HyperStacking Technology
The UtilityScan® GPR System is designed to identify and mark the location and depth of subsurface utilities. The unit features a robust wireless antenna that handles the data rates and withstand challenging field conditions. It is offered with a backup Ethernet connection and is equipped with the LineTrac™ accessory that helps to locate specific power sources situated underground. The HS...
Read More »
New Imaging Sensor Features the Highest Resolution
The indium gallium arsenide (InGaAs) Near Infrared/Shortwave Infrared (NIR/SWIR) imaging sensor has a 16 megapixel photo-dector array on a 5 micron pitch which provides 16 times more detail information. The sensor is compatible with the RQ-21A payload SWAP envelope and the capabilities include a high coverage rate spectral sensing, a monitoring a wide area continuously, high fidelity inspection...
Read More »
Workwear Goes Hand-In-Hand with Employee Satisfaction and Retention
High-quality gear reminds employees that they are valued by their employer and improves their workday. To find out more about choosing the best workwear, download now.
Read More »
New Image Sensor Supports Multiple Resolution Configurations
The OV16E10 is a new 16-megapixel image sensor from OmniVision Technologies, Inc. It supports multiple resolution configurations including the outputs of 16-megapixel images, 4K2K videos, 1080p videos and 720p videos at 30, 60, 120 and 180 frames per second respectively. The sensor is built on OmniVision's 1.12-micron PureCel Plus stacked die technology and it features an integrated 2x1...
Read More »
New AirQuality Sensor Provides a Wi-Fi Based Connectivity
The AirQuality Sensor is designed for monitoring the concentration of particles on the shop floor at 12 ft height. It can detect concentration of particles between 0 and 28 µg/cft, for particles from 0,1 µm und 100 µm. The unit is suitable for Airtowers ranging from 3,000 to 11,800 cfm and works within a range of 14° F to 122° F. It sends data to intelligent over-drive control of the...
Read More »
AutomationDirect Adds SureStep Stepping System Motors, Encoders and Inertia Dampers
New stepper motors, encoders and inertia dampers have been added to the SureStep® system of step motor control. SureStep series high-torque industry-standard NEMA 14, 17, 23, and 34 stepper motors now provide holding torque from 8 to 1288 oz-in. The new smaller frame size NEMA 14 motors (1.4" wide) start at $22.00 and are available in single and dual shaft versions. The SureStep family has...
Read More »
Keyence Corporation of America Releases the Clamp-On Micro Flow Sensor to Monitor Problematic Liquid Flow
The Clamp-On Micro Flow Sensor is designed to be used with any liquid, including viscous and corrosive liquids. The product reduces the risk of clogging and pressure loss. The flow sensor has applications for monitoring instantaneous flow, accumulated flow and shot/dispensing.
Read More »
Chocolate Manufacturers Now Commonly Installing Additional Eriez® Metal Detectors and Magnetic Separators to Better Protect Customers
Strategically Adding Magnetic Separation Processing Equipment Helps Manufacturers Keep Chocolate Metal-Free Erie, PA— Installing Eriez® magnetic separators and metal detectors throughout the entire chocolate manufacturing process--rather than solely in the packaging stage--is quickly becoming the new industry standard for eliminating metal contamination. This proactive approach to...
Read More »New Image Sensor from OmniVision Technologies, Inc. is Designed for High-resolution Front- and Rear-facing Smartphone Cameras
OmniVision Technologies, Inc.’s new image sensor is 0.9 micron, 1/2.83-inch optical format 24 megapixel (MP) image sensors and is built with their PureCel® Plus stacked die technology. The sensor comes in four models. The OV24B1Q is a 4-cell Bayer imaging sensor with in-pixel binning for optimal sensitivity and low-light performance. It has pad locations on the top and bottom of the chip to...
Read More »
5 and 13 Micron Resolve Columns with Greater Bed Stability
Jordi Labs provides materials solutions that set the standard for innovation and quality. Our line of GPC and GFC columns are on the cutting edge of precision manufacturing and a result of our uncompromising commitment to quality and customer service. See our video to learn more.
Read More »
